TBK 2021 built-in double pump vacuum separator, heating and separating the mobile phone LCD screen frame and OCA glue removal
Detailed Steps:
1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch.
2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save.
3. Prepare the wire handle: equipped with a wire handle to separate the screen
4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes.
5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held.
6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting.
7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution.
Features:
1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc.
2. The heating table can rotate 360 degrees, the working temperature is 85â??, the highest temperature is 350â??, and the maximum support is 7 inches.
3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed.
4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad
5.The heating platform is protected by a fuse to prevent burnout.
M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V.
Features:
1.Manual LCD remove was applied to separate the broken Touch Screen Glass.
2.It is easy operated, using time Accurate Temperature Control.
1.Put your LCD with touch screen on the metal plate, LCD side above;
2.Set the 4 arms to keep the touch screen on the metal plate stably;
3.Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree);
4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.
this machine is designed for heat transfer artwork onto mugs A heat press is a machine engineered to imprint a design or graphic on a substrate, such as a t-shirt, with the application of heat and pressure for a preset period of time. While heat presses are often used to apply designs to fabrics, specially designed presses can also be used to imprint designs on mugs, plates, jigsaw puzzles, caps, and other products
Features and Advantages
New and Industrial A grade perfect panels with stable supply
Slim and simple open frame to mount all the LCD kits in one , which is easily installed
3. industrial control board supports the displays working 24 hours
4. Professional and industrial hardware and parts to guarantee its working normally in rough environment
5. VGA interfaces ;Resistive touch screen with USB
6. 17 inch industrial touch monitor for application control , advertising player ,campus and industrial terminals etc
4933 Imig200Dp Lcd Screen Mig Welder Suppliers
Short on time? Let Imig200Dp Lcd Screen Mig Welder sellers contact you.
SAW / Infrared / Capacitive / Resistive Touchscreen ;
SAW / Infrared / Capacitive / Resistive / Nano Foil Touch Monitor;
All in one touch computer;
Indoor/Outdoor Advertising display board;
Education All in one Whieboard;
Self-service Multi-media Kiosk;
Key Characters of Openframe touch screen monitor :
8-55 inch Openframe /Desktop ELO TFT LCD Touch screen monitor;
SAW / IR / Capacitive / Resistive touch screen;
Metal-cased openframe;
High resolution,16.7M colors;
VESA 75mm and 100mm ;
FCC,CE,RoHS;
VGA , DVI ,HDMI input port;
High contrast , high luminance, ;
Wide viewing angle ,short respond time ;
RS-232 and USB output interface;
1,2,4,6,10 touch points available;
Support Windows XP / 7 / 8/ XPE / CE / Linux /Android system;
IP 65 Waterproof,Dustproof, Vandalproof ;
Anti-glare, Anti-shock , Anti-scratch;
1.High brightness 450 nits with high resolution Industrial A grade perfect panels with stable supply
2. Slim and simple open frame to mount all the LCD kits in one , which is easily installed
3. industrial control board supports the displays working 24 hours
4. Professional and industrial hardware and parts to guarantee its working normally in rough environment
5. VGA DVI interfaces ;No touch screen
6. 12.1 inch open frame monitor for application control , ATM , Gas station and industrial terminals etc
As a leading manufacturer of touchscreen solutions in China, Wetouch has engaged in R&D of the touch and display solution for 13 years. Their products are widely used in different field, like HMI, POS system, banking, kiosk self-service system, gaming, etc.
Till now, the company has got more than 10 patents, and has accquired ISO 9001, ISO 14000, FCC, CE, RoHS and TS 16949 certification. Key customers includes Siemens, Delta, Advantech, Flytech, Weintek
Wetouch stands for high level proven expertise in the touch screen and monitor business with stable quality and outstanding customer service.
Square LCD Screen
Square LCD displays, screens, and monitors are specifically designed for commercial applications, catering to the growing demand across industries such as retail, museums, digital art, entertainment, and gaming facilities. These displays are ideal for scenarios requiring unique and professional screens. Notably, they are highly popular in museum exhibitions, display designs, and art installations.
A wide range of options is available, including square panels, panel and kit combinations, enclosed square LCD displays (square monitors), and square chassis displays. Interactive touchscreen alternatives and fully customized solutions are also offered to meet specific project requirements.
Whether it's high brightness, rugged durability, ultra-thick touchscreens, or various input options (such as HDMI, VGA, DP, and DVI), these displays can be configured to suit diverse needs, delivering both functionality and aesthetic appeal.
What is a Square LCD Screen?
A square LCD screen is a unique display format with equal width and height dimensions, designed to fit specific applications where traditional rectangular screens may not be ideal. It combines the reliability and performance of LCD technology with an innovative square form factor, offering unparalleled design flexibility.
Advantages of Square LCD Screens
Optimized Space Utilization
Square LCD screens maximize usable space in compact or square-shaped devices, making them ideal for applications where design symmetry or efficient use of limited space is crucial.
Versatile Applications
Square displays are suitable for:
Point-of-Sale (POS) Systems
Industrial Control Panels
Smart Home Devices
Medical Equipment
Retail Signage and advertising displays
High Customization Options
Available with customizable features such as:
Touchscreen functionality
Brightness adjustment for various environments
Viewing angle optimization
Custom dimensions and bezels
Enhanced Aesthetic Appeal
The symmetrical design of square screens provides a clean, modern look, enhancing the visual appeal of devices and displays.
Reliable LCD Technology
Square LCD screens deliver the same benefits as traditional LCDs, including:
Sharp image quality
Wide color gamut
Energy efficiency
Longevity and durability
Vincanwo's touchscreen industrial monitors come in a variety of models and sizes, meaning the perfect solution for your industrial application is just below. These heavy duty displays are built using solid die-cast aluminum and thick touch screens, leaving them impervious to dust, dirt, flying debris, and even operator abuse. Vincanwo even offers waterproof stainless steel monitors for environments where high temperature, high pressure water jets are necessary.
Capacitive touch panel Product Overview
A high-precision capacitive touch screen for 9inch display devices;
Supports simultaneous operation of 10 points of precise touch, smooth writing, no drift, disconnection and other undesirable phenomena;
Compatible with a variety of systems, intelligent switching under Win XP, Win 7, Win 8, WIN CE, Android, Linux, Mac and other systems;
Adapt to internal and external environments.
Operating voltage: 3.3V
Operating current: 2.5mA
Sleeping current: 0.2mA
Surface Treatment: AG/AF/AR
Mijing CP300 CPB screen separator. Design and add grooves for small accessories in the new product
Setting temperature 60 Degree.
Place the mobile phone in the demolition screen (LCD facing up).
Preheat for 5-10 minutes.
Testing the softening of mobile phone LCD side glue with screen removal tool.
Determine that the softening can be disassembled.
Package Includes :
1 * Host
1 * Power Line
1 * Instructions
1 * adapter
TE-798 Cell phone LCD Fix Clame for Mobile phone / iPad / Tablet screen repair. Display screen fastening clamp clip, cell phone LCD screen fastening shaped fixing tools, adjustable metal clip fixture clamp for mobile phone repair tools.
Product Features :
100% brand new and high quality
Versatile screen fastening clamp clip
Quality metal made, more durable and tougher than those in plastic
Rubber mats: Rubber padding inside help no chance to scratch your phone screen.
Soft grip pad: The inside soft grip pad of fixture is soft, so it will not scratch your screen.
Used to clamp your repaired device.
Help the replaced new screen in its right place, not bulge or sink.
Make the screen to joint with the frame perfectly.
Product Description :
Function: A helpful tool to clamp your mobile phone when you replace a new screen in its right place.
Universal design: Universal clip fixture, can be used to fix all smart phone and tablets.
Solid material: Made of premium quality material, the clip is wear resistant and durable.
Easy to handle: Compact clip is easy to handle and carry.
Application: Widely used for phone repair to fit most mobile phone and tablets.
Please Notes :
Please allowed 1-3mm differences due to manual measurement, thank you!
Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.
Package List :
2/4 * Phone LCD Screen Fastening Clamps
Adjustable Fastening Clamps Metal Clip Fixture for LCD Display Screen Repair Tool. LCD metal clamp fixture for Phone screen displays screen repair.
Features:
Universal metal clip fixture
Adjustable holder to fit most mobile phone and tablets
Used to clamp your repaired device
Help the replaced new screen in its right place,not bulge or sink
Make the screen to joint with the frame perfectly
Light weight and durable
Easy to use and handle
Compatible for Fixing Screen Uplift Cell Phone, ,, Laptops, Tablets, LCD Screen...
Specification:
Material: Metal + Plastic + Rubber
Weight: 45g/piece
Holder width: Max 15mm
Color: Silver + Black
NOTE: Please spin the top gently or you maybe break the display screen.
M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V.
Features:
Manual LCD remove was applied to separate the broken Touch Screen Glass.
It is easy operated, using time Accurate Temperature Control.
Operation:
Put your LCD with touch screen on the metal plate, LCD side above;
Set the 4 arms to keep the touch screen on the metal plate stably;
Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree);
Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.
