The professional duplicating machine, transpronics, has been designed and developed to assist immobilizer system specialists. Transpronics is not only a duplicating machine; it is also a unique machine that can make transponders from eeproms in immobilizer boxes when a customer has lost all keys. It can also inform you if a transponder is locked or not. It has been developed over 4 years. It can copy most crypto transponders like 42, 45, 4d, most of 44 vag and some 40 and 41 transponders. It can copy texas fixed transponders to tpx1 without battery transponders.
+ identify transponder
+ write transponder codes
+ copy transponder
+ calculate eeprom memory
+ calculate transponder codes from eeprom memory
+ calculate pin-codes from eeprom memory , from chassis and from transponder
+ test transponder
+ generate fixed transponder codes
+ pc software
2- copy most of crypto transponders
A- philips crypto 42
B- philips crypto 44 vag
C- philips crypto 45
D- texas crypto 4d
E- some philips crypto 40 and 41
3- show all information about all transponders
A- transponder types
B- transponder codes
C- locked or not
D- which car brand
E- eeprom codes
F- pin-codes
Copper busbars & metering panel/cabinets,
automatic power factor correction panels / capacitor bank panels, automatic mains failure(amf)panels, low voltage (lv) power distribution boards in form 4 (compartmentalized) fixed and draw out construction low voltage (lv) panels in form 2 (non compartmentalized) construction, custom built panels both in form 2 construction / cubicle type, programmable logic control(plc) system panels in form 2 & form 4 fixed & draw out construction, auto synchronizing / auto load sharing dg control panels, stadium lighting control panels, variable speed drives(vsd) control panels.
Update for opel immo-1 immo-2 and air-bag tool
Update to last version 2.50
Latest update: vw polo , seat ibiza cordoba 2001 - 2005, fabia 2004 ect.
Single click access for vdo seed-key dashes!
(this means: vw passat b6, bora/jetta, polo to 2004 year, golf 4, sharan to 2003 year, skoda octavia/fabia to 2004 year , some seat dashes up to 2004 year ect...)
Vag kombiinstrument / immo box eeprom programmer... Via obd connector!
A jig's primary purpose is to provide repeatability, accuracy, and interchange ability in the manufacturing of products. A jig is often confused with a fixture. A fixture holds the work in a fixed location. A device that does both functions (holding the work and guiding a tool) is called a jig.
We make jig and Fixtures as per your sample, locked by hydraulic cylinder or manual. We can make every kind of small & big fixture.
Products :
Luminaires (electric lighting fixtures) ‘ for standard double ended linear tubular fluorescent lamps for indoor & outdoor uses as under :
Consequently we have also obtained ISO 9001 :2000 Certificates for Quality Management
for Design and Manufacturing of Lighting Fixtures from the Engineering Institute
of Thailand under H.M. The King’ s Patronage and also from ‘AFAQ-EAQA’ of U.K.
Equipments :
All the equipments are modern and highly efficient and with caliberations
for precision settings of tools. The punching – stamping – notching machine is imported
and pre-programmable for automatic functions. The other equipments such as shearing, corner shearing, press brakes are motorized for accuracy. The spot welding apparatus are very efficient and give strong smooth joints.
The equipments for dry powder coatings are modern and fitted with Robots mounted with high pressure spray guns for a very uniform coating and high gloss finish.
All the equipments are very well maintained so that the same turnout a firstclass quality products.
Materials & components used :
Housings are fabricated from Cold Rolled Steel sheets conforming to JIS G3141-1996 commercial quality corresponding to TIS 2021 CRI.
Reflectors are made from mirror finish pre-anodized aluminium sheets in purity not less than 99.85% to provide total reflectance 95% - imported from Germany & Italy.
The louvers are also made from the same grade aluminium sheets as mentioned above.
The Lamp and Starter holders are imported from Germany and certified by TIS 344-2530 =IEC 61-2(1969), IEC 400(1982).
The dry powder used for coating is UV stabilized thermosetting based on polyester resins (Hybrid system) giving high gloss and good resistance to water and detergents.
Accreditions :
As per the rules and regulations the factory has a Iicence to manufacture / fabricate luminaires for fixed general purposes, fixed recess purposes
and lighting & similar equipments in conformity with TIS = IEC.
Accordingly Iicences for each type have been granted to manufacture in compliance with :
TIS 902-2532 = IEC 60598-2-1-(1979) Fixed General Purpose Lumonaires.
TIS 903-2532 = IEC 60598-2-2-(1979) Fixed Recessed Luminaires.
TIS 1955-2542 = CISPR 15(1999-04) CISPR 11(1999-08) IEC 60598. Radio Disturbance Limits.
SBB Key Programmer(Version V33) adds Ford 2010 and Hummer.
V33 is the latest version now ! older is v32 ,v31 and v28
It is known that China sbb key programmer is the best key maker for European car, compared to T300 key programmer and ad900. Eobd2 Eshopí»s SBB key programmer now updated to the newest version V33. If you are looking for a best key programmer for Ford 2010 or Hummer, you will find Sbb key pro v33 can make it, during sbb key programmer carlist, it adds Ford 2010 and Hummer.Here"s the picture of SBB Key Programmer V33.
SBB Key Programmer V33 add 2010 Ford and Hummer
SBB is a universal key programmer for it can program multi-brands car keys, because its software with full database containing the most important vehicle makes. Compare to the former version which support global cars, SBB key programmer V33 support new cars likes Ford 2010 and Hummer.
SBB V33 Key maker function
1. Programming new keys
2. Reading keys from immobilizer"s memory /pin code
3. Reactivating keys no longer in the car owner"s possession
4. Operation by means of a menu guided programming
5. Programming new remote controls.
How SBB universal key maker Works :
SBB key programming tool can still make key even when the customers lost their automobile keys, because SBB interface is to insert into the OBD diagnostic seat to read chip data.
The steps of SBB make car keys:
1) Before running SBB key programmer, please insert the blank new key into your car keyhole;
2) Turn on ignition switch;
3) Insert SBB 16-pin interface into your car OBD2 diagnostic seat. SBB key programmer copies chip according to car model, and it program key not clone key, it only needs to insert SBB 16-pin interface into your car OBD2 diagnostic seat, then read out immobilizer pin code from immobilizer dump/eeprom of the car before writing it into new blank key. When programming Ford vehicle, it does not need pin code.
SBB key programmer is better for European vehicles, and it is no token system.
SBB copies chip according to car model, while AD900 does according to chip model. SBB key programming tool can still make key even if all of keys lost, because SBB interface is to insert into the OBD diagnostic seat to read chip data; AD900 can write the chip of an old key into a new key or empty key. And SBB can read immobilizer pin code as MVP and T300 do, while AD900 can not read immobilizer pin code, AD900 can not read immobilizer pin code, AD900 can directly copy and duplicate keys.
The AVR-COB is an ideal development platform for Embedded and Real Time systems programming. Powered by a RISC machine (ATmega128) that provides a throughput of 16 MIPS and up to 128KB of internal storage (flash), the board is suitable for any sort of embedded application development.
On-board peripherals like Keypad , LCD along with the communication port (RS232) and the Gtkterm driver (hyper-terminal for Windows) make the board apt for Embedded (non-OS) as well as OS based environment. RT Kernels with small footprint (uC/OS-II, FreeRTOS) can be ported on the board to gain hands-on experience of Real time application design.
Features:
ATMega128 based microcontroller board with 128kB flash memory working at 16 MIPS
4KB Internal SRAM and 4KB Internal EEPROM
Open interface to all port pins
Communication ports provided: I2C, SPI, RS232 (dual programmable USART, can be used as standard input /output for the board)
LDR and POT to be used as sensor along with on-chip ADC
Onboard 16x2 LCD with backlight to be used as a standard output for display
Open LED interface to monitor status of port
On board I2C based DS1307 with battery back up to be used as a Real Time Clock
Other on board components include LDR, Buzzer for general purpose experimentation
USB programmable (no external programmers required, can be used with laptops without any converters)
USB powered (no external supply required)
Modular design to permit easy replacement of controller board in case of damage
uC/OS-II, a highly portable, ROMable, very scalable, preemptive real-time, multitasking kernel for microprocessors and microcontrollers (DO-178B Certifiable RTOS for use in Safety Critical Systems) source code with ATmega128 port included (for GCC)
13W LED HCRI Square Recessed Down Lights (Fixed)-COB
13W LED HCRI Square Recessed Down Lights (Fixed) - COB
Features:
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, etc.
7W LED Recessed Down Lights (Adjustable & Fixed)-COB
7W LED Recessed Down Lights (Adjustable & Fixed) - COB
Features:
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, homes, etc.
3W-5W LED Square Recessed Down Lights (Adjustable & Fixed)-COB
3W-5W LED Square Recessed Down Lights (Adjustable & Fixed) - COB
Features :
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, etc.
Characteristics
1. Dulian-style/straight-line knife storehouse is a standard machining center with high cost performance.
2. The machine is suitable for the processing of diversified compound products and has a wide range of functions: drilling, cutting, trimming, etc.
3, the table is a strip vacuum adsorption table, which can not only strongly absorb materials of different areas, but also use fixtures to fix various shaped materials, which is flexible and convenient.
4. Row drilling is optional.
3W-5W LED Recessed Down Lights (Adjustable & Fixed) - COB
Features :
1. Wide voltage range with various output range.
2. Environment-friendly and no UV or IR radiation.
3. Easy for installation and maintenance.
4. Replacement of traditional lighting fixtures.
5. Long lifespan, low cost of maintenance.
6. Energy saving up to 70% and high luminous intensity.
Applications:
Hotels, supermarkets, fashion shops, restaurants, offices, lobbies, art gallaries, museums, corridors, exhibition halls, bars, residential houses, etc.
Surface grinding machine m7140 (worktable size: 400*1000mm)
Advantage:
Very wide in use.
Full automatic with compact structure and easy to operate.
Mainly surface grinding by use of the wheel periphery, but also by the wheel end surfaces to grind the vertical surface of the workpieces.
Workpieces can be placed on the magnetic chuck or fixed directly on the bench or with other fixtures according to various of workpieces.
Guiderails with plastic-iron, wear-resistant and rigidity to prolong long-life in use.
This medical finger splint consists of fixed board, protective pad, soft cloth belt , fixed belt and so on, which is equipped with excellent viscosity, fast curing speed, hard strength and light weight after curing. Due to the high performance of biocompatibility, it plays an important role in medical field.
Product Details
Feature:
This medical finger splint can be widely used for fixation and support of fracture or injury or postoperative site.
After hardening and fixing, there will be no itching of the skin and breakage of the fixture.
We do promise that it will not cause skin itching, ulceration and odor after fixation.
Description
This medical finger splint consists of fixed board, protective pad, soft cloth belt , fixed belt and so on, which is equipped with excellent viscosity, fast curing speed, hard strength and light weight after curing.
Due to the high performance of biocompatibility, it plays an important role in medical field. Animal experiments and acute and chronic toxicity experiments have confirmed that medical finger splint without irritating effects is non-toxic, non-distortion-free and so on. Compared with gypsum on the market, it has higher strength, thus ensuring firmness. On the other hand, it is really comfortable and safe for daily use, which will not itchy to skin and broken objects. Due to the simple and hygienic operation, it can be fixed in a short time, which is really easy to dismantle with less care.
