Find Verified Usr Iot Serial To Ethernet Converter Suppliers, Manufacturers and Wholesalers

Features:
-Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward.
-Cache size: 256KB, address table size: 4KB
-Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters
-Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d
-Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function
-Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate.
-TX/RX dual-header Standard SC interface
-Electronical interface supports 10Mbps, 100Mbps, 1000Mbps
-Automatically adapt , optical interface work rate 1000Mbps port
-Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission
-Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status.
-Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs
-Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V)
-Over 50,000 hours consistent working period.

Transmission fiber:
Multi-mode: 50/125, 62.5/125 or 100/140166;204;m
Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m
Operating temperature :0-50 161;227; C
Storage temperature: -40-70 161;227; C
Humidity: 5% -90% non condensing.

LNK-IMC1100-SFP is a microtype media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -40℃ to 80℃. LNK-IMC1100-SFP supports 100M Ethernet port and 100M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. LNK-IMC1100-SFP is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.
This Sleek Microtype design media converter occupies limited space and it's an ideal solution for easy installation within most camera housings.
Ethernet
Standards: IEEE802.3u 100Base-TX/FX
IEEE802.3x Flow Control
Processing Type: Forward
Half-duplex, Full-duplex
Forward Filter Rate:: 148,800pps (100Mbps)
Cabling: 100Base-TX: Cat5 or above
Maximum Distance: Cat5 UTP up to 100m
Connector: 1x RJ45
Optical Port: 1 x SFP 100Base-FX
Environmental
Operating Temperature: -40°C to 80°C (-40°F to 176°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Relative Humidity: 5% to 95% non-condensing
MTBF: > 300,000 hrs
Electrical and Mechanical
Input Power: 12VDC (Terminal Block)
Power Consumption: 2.4W Max. 0.2A@12VDC
LED Indicators
Power: Power Status
100TX: Link/Activity, Speed
SFP: Link/Activity
Dimensions (WxDxH): 36.2 x 117 x 24.5 mm
Weight: 0.15Kg
Casing: Aluminum Case
Mounting Options: Wall-mount / LNK-MR-C10 1U Rack
Regulatory Approvals
ISO9001, CE, FCC, RoHS
FCC part 15,Class A
EN55022:2006+A1: 2007 Class A
Surge Protection:
RJ45: 1KV
Power: 500V
ESD: 4KV/8KV


Standard Packaging: Carton packaging(Support customer Logo)

The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices.

1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable.
2.Converting the data protocol of Mitsubishi PLC into Modbus
TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1
channel TTL.
3.Support 1 channel RJ45 Ethernet port
4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error.
5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications.
6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface.
7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol.
8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring.
9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.

Contact: amily[at]veecom dot com dot cn

GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.

GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.

GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.




245mm*215mm*50mm

Overview:

GVE-Tplus is E1 to V.35/V.24/RS232 and Ethernet Converter. Other series interface RS449/RS530/X.21 also can be optional. E1 port can support BNC/75ohm and RJ45/120ohm optional.
This device provides an economical digital access solution for E1 and fractional E1 network services. With a adapter cable, the device can connect to other DTE device, such as router, at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame, using only the required number of timeslots, timeslot assignment is accomplished according to the data port speed and manual setting of DIP switches. The V.35 or V.24/RS232 and Ethernet share the 2Mbps bandwidth, the total bandwidth of the 2 interfaces must be not more than 1984Kbps.GVE-Tplus is widely used in communication network, both in WAN and LAN connection field.

Features:

*Comply with ITU V.35, G.703, G.704, G.706, G.823
*Full comply with IEEE 802.3 /IEEE 802.1Q (VLAN)
*Framed (N*64Kbps) and unframed (2.048Mbps) optional
*Ethernet port 10Mbps, Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock, E1 recovery clock or V.35 line clock
*Provide analog and digital loopback and remote digital loopback test
*For E1 interface, 75ohm (unbalanced) and 120ohm (balanced) optional
*For data interface, V.35 and V.24/RS232 optional
*Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount available
*16-slots, elaborate cooling design and two redundant power supplies
*Support management
*-48V DC & 220V AC power supply optional

Specifications:

E1 & FE1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical for unbalanced
RJ45 twisted pair for balanced

Ethernet interface
Comply with IEEE 802.3/IEEE 802.3Q(VLAN)
Rate:10Mbps,Half/Full auto-negotiation
MDI/MDI-X optional
Physical interface:10 Base-T(UTP);RJ45

V.35,V.24/RS232 interface
Comply with V.35,V.24/RS232 standard
Rate:2048Kbps;N*64Kbps(N=1~31)
Transmission mode:Synchronization
Data interface:V.35 or V.24/RS232
Physical interface:DB25 female jack,V.35 via external adapter
Work mode:DCE

Power supply
AC power:220V¡¨¤10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature:0¡«40¡æ
Humidity:0¡«95% RH


Carton.

Overview
E3/t3-t is state of the art network termination units (ntu) connecting fast ethernet lans over e3 or t3 circuits. The devices enable service providers and isps to supply transparent. Ethernet services to remote locations over existing e3/t3 infrastructure.

The devices can be used in a point-to-point application and widely used in lnteroffice or enterprise lan connection. E3/t3-t has one unframed e3 or one framed t3 port, and one 10/100basetx port. Packets are forwarded from the ethernet network to the e3 or t3 network at wire-speed, fully utilizing the expensive tdm circuit bandwidth.

Features:

* best price performance ethernet over e3 or t3 intelligent converter in the market
* wire-speed forwarding fully utilizing the e3 or t3 circuit
* vlan stacking and tagging enabling service providers to provide layer 2 transparent lan services while securing providers management
* fault propagation of e3 or t3 error conditions to ethernet port
* diagnostic collection on tdm and ethernet interfaces
* comprehensive led indicators on front panel, convenient for the diagnosis of equipment working state
* -48v dc & 220v ac power supply optional.

Specifications

E3 interface
Comply with itu g.703
Rate: 34.368 mbps
Code type: hdb3
Impedance: 75ohm unbalanced l
Physical connector: bnc coaxial for unbalanced

T3 interface
Comply with gr-499-core, ansi t1.107, ansi t1.102
Rate: 44.736 mbps
Code type: b3zs
Impedance: 75ohm unbalanced l
Physical connector: bnc coaxial for unbalanced
Power supply
Ac power: 220v+-10%, 50hz
Dc power: - 48 v (optional)
Power: 5w

Environment
Temperature: 0-40oc
Humidity: 0-95% rh






Carton.

Technical Specifications
Operating standards: IEEE802.3z/AB, 10/100/1000Base-T and 1000Base-SX/LX/HX
MAC address table: 4K
Data Buffer: 256K
Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: LC,1000Mbps

Cable :
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125¦Ìm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125¦Ìm (the max distance up to 100km)
Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
Power: AC 220V(170-260V) 50Hz; DC 5V£¬1A
Ambient temperature: 0 ¡« +50
Storage temperature: -20 ¡« +70
Humidity: 5% ¡« 90%

Dimensions:
Internal Power: 40 (high) x 110 (width) x 140 (length) mm
External Power: 26 (high) x 70 (width) x 93 (length) mm.

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC addresses table: 1K
Data buffer: Built-in 128Kbyte RAM .
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps

Cable:
UTP: Cat. 5 (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62.5/125m, the max distance up to 2km or 5km
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m, the max distance up to 20 -120km
Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power Requirement: AC 170 ¡« 240V, DC 5V.
Ambient Temperature: 0 ¡« 70
Humidity: 5 ¡« 90%
Dimensions: Internal power: 30, 110, 140mm
External power: 26, 70, 93mm.

*** LNP-0602-M-T/ 6-Port Industrial PoE+ Unmanaged Ethernet Switch *** | Network broadcast storm protection | 4-Ports IEEE 802.3at compliant PoE+ Function with 30W/Port | 2-Ports 100Fx SC/ST type connector (Multi / Single mode) | Supports Auto MDI/MDI-X Function | Store-and-Forward Switching Architecture | 2K MAC Address Table | Surge Protection: 2,000 VDC support | ESD Protection: 6,000 VDC support | Redundant Power Input Design : 48~55VDC | Built-in 1 relay output for Port Break Alarm | IP30 Rugged Aluminum Case Design | DIN-Rail and Wall Mount support | Operating Temperature range- STD: -10° to 70° C, EOT: -40° to 75° C | 5-Year Warranty |

***LNP-0800-T/ 8-Port Industrial PoE+ Unmanaged Ethernet Switch, w/8*10/100Tx (30W/Port); EOT: -40~75C***| Network broadcast storm protection | 8-Port IEEE 802.3at compliant PoE+ Function with 30W/Port | Supports Auto MDI/MDI-X Function | Store-and-Forward Switching Architecture | 2K MAC Address Table | Surge Protection: 2,000 VDC support | ESD Protection: 6,000 VDC support | Redundant Power Input Design – 48~55VDC | Built-in 1 relay output for Port Break Alarm | IP30 Rugged Aluminum Case Design | DIN-Rail and Wall Mount support | Operating Temperature range - STD: -10° to 70° C, EOT: -40° to 75° C | 5-Year Warranty |

***5-Port 10/100TX Slim Industrial Ethernet Switch***
| Extended Operating Temperature -40° ~ 80° C (-40° ~ 176° F) | Store and Forward Switching Architecture | Flow Control on Full-Duplex | Back Pressure on Half-Duplex | Supports Auto MDI/MDI-X Function | Wide-Ranging Redundant Power Design | UL Class I, Division 2 Certified | DIN-Rail and Wall Mount Design | Slim IP-30 Case Design |

10/100 MBPS managed media converter

Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.

Hardware Function

Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.




Device Size
Standalone: 132mm (width)*36mm (depth)*122mm (height)
19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)

Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic
switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4
gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules.
It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports.


1pc/box

Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic
switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4
gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules.
It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports.


1pc/box

The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

Introduction: The GCAN-202(CANET II) is a CAN-Bus converter, used for Ethernet converting CAN-Bus. It is an industrial-grade CAN-Bus converter, whose function is to realize interconnection easier and extends the application scope of CAN-Bus. Function
: 1.Baud rate modification online Support the basic working parameters configuration of module by Ethernet transmitting data to module. Use this function, itâ??s more convenient to modify some basic CAN-Bus communication parameters.If you want to know more, please contact us. 2.CAN-Bus close to restart function: When CAN-Bus failed to receive/transmit data due to EMI, CAN-Bus hung on, GCAN-202 would restart the part of CAN-Bus, then restore communication. 3.Format conversion

Kb3070 wifi dtu (data terminal unit) is wireless data transmitting terminal , it is uart-eth-wifi (serial port - ethernet - wireless network) converter .
This product based on the universal serial interface network standard, built-in tcp / ip protocol stack, enabling the ction
Wireless securityWireless mac address filtering
Wireless security function switch
64/128/152 bit wep encryption
Wpa-psk/wpa2-psk¡¡éwpa/wpa2 security mechanism
Network managementRemote web management
Configuration file import and export
Web software upgrade
Serial to ethernet
Maximum transmission rate230400bps
Tcp connectionMax connection number>20
Udp connectionMax connection number>20
Serial baud rate50~230400bps
Other parameters
Status indicatorStatus indicator
Environmental standardOperating temperature¡êo-20-70¡æ
Operating humidity¡êo10%-90%rh¡ê¡§noncondensing¡ê©
Storage temperature¡êo-40-80¡æ
Storage humidity¡êo5%-90%rh¡ê¡§noncondensing¡ê©
Additional propertiesFrequency bandwidth optional¡êo20mhz¡¡é40mhz¡ê¬automatic



Size: 82mm(l)*59mm(w)*25.2mm(h)
Weight: 170g

1. Full shielded with zinc alloy housing
2. Rj45 full shielded type
3. 180 straight cable entry
4. Comply with cat.8 and cat.6a
5. Suitable for the poe plus ( ieee 802.3at ) applications
6. Easy, quickly, reliable and comfortable installation
7. Suitable for cabling from home networks to large data centers

FEATURES

1. Compliant with IEEE802.3af and supporting Non-standard POE
2. Power output: 5V/2A
3. Data rate: 10/100Mbps
4. Supporting either mode A or mode B
5. Power/Data cables (21cm)
6. LED indication for DC power

OVERVIEW

PD2052U is a IEEE802.3af POE Splitter with a network cable and Micro USB cable. It supplies operational power to Raspberry Pi B/B+/2/3 or any other 5V micro USB powered devises. PD2052U enables power current to travel on the Ethernet network cables and eliminates the need to directly connect a power supply to the powered devices.