Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade
Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Innovative Coconut Processing Solutions: Dry Coconut Copra and Wet Coconut Peeling Excellence
Experience the forefront of coconut processing technology with our Dry Coconut Copra and Wet Coconut Peeling Machines. These cutting-edge machines boast an array of features and benefits that redefine efficiency, precision, and versatility, catering to a wide spectrum of applications.
Features and Benefits: Embodying the essence of innovation, these machines offer an array of features and benefits that revolutionize the coconut processing landscape:
Versatile Blades: Our Fruit & Vegetable & Coconut Flakes Making Blades are available in various dimensions, CE-approved, and weigh approximately 28 grams. Ensuring long-lasting quality and accuracy, these blades are a hallmark of precision.
Versatile Applications: From Coconut Peeling to Coconut Chips and Coconut Deshelling, these machines cater to a range of needs in the coconut processing realm.
Coconut Peeling Machine No. B-10: This quick-controlled peeler is designed for efficient removal of the brown outer layer of coconut fruit, minimizing yield loss for both coconut and other peel-able fruits and vegetables.
Key Features:
Rapid Layer Removal: Efficiently peels the brown outer layer of coconut and other produce.
Speed and Efficiency: Removes the layer at an accelerated rate, maximizing productivity.
Manual Loading and Unloading: User-friendly manual handling enhances ease of operation.
Transparent Lid Window: The peeling process can be monitored through a window on the lid.
Hygienic and Easy Cleaning: Designed for easy cleaning and maintenance.
Material Quality: Contact parts crafted from stainless steel (S.S.) or aluminum, ensuring durability and hygiene.
Safety First: Working parts are well-guarded to prioritize operator safety.
Wave Shaped S.S. Disc: Mobilizes the product to expose maximum surface area for uniform peeling against the S.S. barrel wall.
Impressive Capacity: Can process 35 to 45 pieces per batch in approximately 1.5 to 2 minutes, translating to around 1050 to 1350 pieces per hour.
V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times
V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.
Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)
Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell
Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)
Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m²/sec (max.)
- Ph Value : 6.5 to 8.5
The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine.
Fixed blade turbines are very well suited to low head power plants with limited variation in head and load.
Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow.
Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load.
Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
Water flow monitor LJZ-2 turbine parts
Selection of advanced technology, absolutely first-class service quality, YOYIK over the years to the same faith. The main technical backbone are retired senior engineer, senior mechanic. Many of them have participated in the planning, production and installation of power stations such as Gezhouba, Ertan and Three Gorges, and provided high-quality equipment selection, construction planning, installation and dispensing of hundreds of hydropower stations and overhaul of thermal power plants. , After-sales service and other train services.
Yoyik can offer many spare parts for power plants as below:
#DF-Water flow monitor LJZ-2 turbine parts-DF
Integrator Analog Input Board 421400688
Bolt electric heating rod ZJ-20-25
Eddy Current Signal Converter CON021/914-080
Speed sensor CS-1G-G-080-05-00
240v pressure switch BPSN4KB25XFSP12
Eddy Current Sensor PR6424/004-010
Speed sensor CS-1G-D-100-03-01
LVDT Sensor HBTD-6-800
Sensor DF310580-50-07-00
optical tachometer sensor SZCB-01
Casing Expansion Monitor DF9032 Max A
Heat Expansion Transducer TD-2, RANGE: 50mm
Power unit FDPC75C3-B
linear differential sensor (Linear variable differential transformer) của van MSV 1000TD
Equivalent Expanda Cable Coil for soot blower IK-530EL
LVDT Sensor HY-6-100-15-D
Heating rod DJ-18
Inverter AAD03020DKT01
Pressure relief valve YSF16-70/130KKJ
tws proximity sensor CWY-DO-810800-50-09-02-01
linear sensor TDZ-1B-05
electromechanical pressure switch BPSN4KB25XFSP19
linear position control HL-3-250-15
Speed sensor CS-1G-D-065-02-00
Heat Expansion Sensor & Transmitter TD-2 0-50mm
Switch 162F1300
Speed sensor CS-1G-G-080-03-01
Anti-interference relay UEG/F-8DPDT
POSITIONER VALVE V18345-1010521001
INTERFACE BOARD EPSUPER-JKB-090214-A
Speed probe CS-3F-M16
Bolt electric heating rod ZJ-22-5
Limit Switch WLGCA2-2-TH
LVDT Sensor TD-1-0300-15-01
Bolt electric heating rod ZJ-20-39A
Solenoid Valve 2W-160-15
Water flow monitor LJZ-2 turbine parts
Blade diameter 1.6m
Rated Rotated speed 200
Rated wind speed 8m/s
Rated power 300W
Max voltage 450w
Output voltage 12/24v
Start up wind speed 2(m/s)
Operating wind speed 3-35(m/s)
Security wind speed 50(m/s)
Height of tower 6m
Weight of top section 102kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 2pcs
can supply power for lighting, electric fan, charger.
Blade diameter 2.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 1000W
Max voltage 1500w
Output voltage 24V/48v
Start up wind speed 2.5(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 170/160kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 4pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.
Blade diameter 2.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 2000W
Max voltage 3000w
Output voltage 96v/48v
Start up wind speed 2.5(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 232/252kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 8pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.
Blade diameter 3.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 3000W
Max voltage 4500w
Output voltage 220v
Start up wind speed 3(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 409kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 18pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger, air condition.
Blade diameter 1.8m
Rated Rotated speed 200
Rated wind speed 8m/s
Rated power 500W
Max voltage 750w
Output voltage 24v
Start up wind speed 2(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 6m
Weight of top section 127kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 2pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.
ROTATING SPEED MONITOR JM-D-5KF
Deyang YOYIK skill is strong, the production of strict accordance with national standards. With the power station forging, mining metallurgy, rolling, cement and spare parts spare parts, metallurgy, rolling and other products improve the production and operation system. For hundreds of water technology change, hydropower, thermal power plant overhaul supply of high-quality equipment selection, equipment commissioning, construction plans, spare parts, after-sales service, such as through-train service. The company to undertake hydropower stations, thermal power plant unit capacity transformation, technical transformation and overhaul projects. Look forward to the major manufacturers to inquire.
#DF-ROTATING SPEED MONITOR JM-D-5KF-DF
voltage sensor CE-VM01-52MS1-0.2
Power Board SY-V2-POWER (Ver 1.10)
eddy current proximity sensor CWY-DO-816002
Dust-proof ring of adjusting door guide sleeve GSF50
pressure transducer types CS-III
Coil Solenoid R90021396
LVDT Sensor TD-1GN-800-15
Travel switch WLGCA2-TH
PULLCORD SWITCH HKLS-1
Integrated communication terminal ICTes03
analog pressure switch RC771BZ090H
Probe CS-3F-M16*1-L20
different thermometers WSS-401
LVDT Sensor 191.36.09.14
Limit Switch WLGCA2
Armoured Thermocouple WRNK2-101
TACHO METER SZC-04FG
Extension cable 330130-085-02-CN
different types of displacement transducers 3000TD
LVDT Sensor TH-6GN-150-15-01
Pressure Switch 860300
Bearing Reverse Temperature Thermal Resistance WZPK2-380B
transformer oil level indicator DYW-250
Thermostat Pinhole Lens DXTV600B
Electromagnetic Speed Controller DEC8505D
pressure measuring machine BH-053003-053\500~4000PSI
Tracking Opening GZK-1010
PLC module NFLR121-S00 S50
MOV module A144I, A144I BZ-K2-3J 141010430
Eddy current probe 330901-00-12-70-12-CN
speed sensor G-065-08-01
ROTATING SPEED MONITOR JM-D-5KF
