Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times
V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.
Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)
Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell
Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)
Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m²/sec (max.)
- Ph Value : 6.5 to 8.5
China made Turbine Rotation Speed Monitor HZQS-02A for power plant
Dongfang Yoyik has advanced technology and equipment, with excellent management philosophy, fair and reasonable prices, high brand reputation. The product are sold to worldwide, and win many good reputation among users. It is worth you to buy. We sell a variety of domestic and international first-line brand. We also provide professional accessories of Steam Turbine, Electric Machinery, and Boiler.
Yoyik can offer many spare parts for power plants as below:
#DF-Turbine Rotation Speed Monitor HZQS-02A-DF
lvdt linear position sensor HTD-50-3
Analog Linear Displacement Sensor HL-6-500-15
lvdt 0-300 ZDET-350B
lvdt transducer A157.33.01.3
Differential Pressure Gauge MEX5D62B86
digital tachometer rpm meter DF9011 Pro
Magnetic Sensors CS-3 M10*1
Controller NE9611/04
RPM Sensor magnetic SC-1
rpm speed meter digital display RZQW-03A
Rotary Torque Sensor CS-3-M16-L60
k type thermocouple TE-304
thermocouple probe WRNK-322
RPM Sensor magnetic CS-3F-M16*1-L20
Shaft Rotation Speed Sensors SC-1
rtd temperature WZPM2-002
lvdt 0-300 DET-150A
linear variable displacement transducer TDZ-1G
Non-Contact Linear Displacement sensor TD-1-800
thermometer gauge WSSP-481
angular displacement sensor 191.36.09.13
thermal resistance testing WZPM2-08-67.5-M18-B
Turbine Rotation Speed Monitor HZQS-02A
Gear speed sensor CS-I-D-065-05-01
pt100 sensor WZPK2-1716
steam turbine bolt heater ZJ-20-R5
lvdt displacement sensor inductive sensor DET700A
non contact rpm sensor CS-1-G-100-06-00
speed sensor cost K-FC01
displacement sensor HL-6-150-15
dual sensor rtd WZP2-014s PT100 2M
steam turbine bolt heater ZJ-22-26
Heater rod ZJ-20-8B
full form of lvdt HL-3-300-15
lvdt 0-300 TDZ-1-12
lvdt displacement transducer ZD-2000TDA
lvdt probe TDZ-1E-02
Platinum RTD Sensor WZP2-6520NMF
LVDT Measurement B151.36.09.04.13
Tacho RPM sensor CS1
pt100 temperature transmitter WZRM2-001
Thermocouple Control WRNK-231TZ M20*1.5
non-contact displacement sensor HL-3-400-15
Electromagnetic Speed Controller DEC8505D
thermocouple k type TC03A2-KY-2B/S12
Non-Contact Linear Displacement sensor DET200A
displacement inductive sensor 180.36.06-01
electric heat elements HY-GYY-1.2-415V/3
Turbine Rotation Speed Monitor HZQS-02A
The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine.
Fixed blade turbines are very well suited to low head power plants with limited variation in head and load.
Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow.
Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load.
Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
Attachable to both sides of the (pulley) and rear (bell housing) of the engine
Independent control by 2 clutches
Live pulley provided (7â?³, B type, 2 grooves)
Perfect brake system to prevent dragging
Zinc anodes on oil coolers prevent the corrosion.
Monitoring function to see rotation of pump shaft
Pressure gauge provided as standard
Easy removal of metal in oil with a magnet plug
Compatible pump pad for various pumps (If required, machining is needed)
Extendable 2 output ports, each with a gearbox installation (option)
Water flow monitor LJZ-2 turbine parts
Selection of advanced technology, absolutely first-class service quality, YOYIK over the years to the same faith. The main technical backbone are retired senior engineer, senior mechanic. Many of them have participated in the planning, production and installation of power stations such as Gezhouba, Ertan and Three Gorges, and provided high-quality equipment selection, construction planning, installation and dispensing of hundreds of hydropower stations and overhaul of thermal power plants. , After-sales service and other train services.
Yoyik can offer many spare parts for power plants as below:
#DF-Water flow monitor LJZ-2 turbine parts-DF
Integrator Analog Input Board 421400688
Bolt electric heating rod ZJ-20-25
Eddy Current Signal Converter CON021/914-080
Speed sensor CS-1G-G-080-05-00
240v pressure switch BPSN4KB25XFSP12
Eddy Current Sensor PR6424/004-010
Speed sensor CS-1G-D-100-03-01
LVDT Sensor HBTD-6-800
Sensor DF310580-50-07-00
optical tachometer sensor SZCB-01
Casing Expansion Monitor DF9032 Max A
Heat Expansion Transducer TD-2, RANGE: 50mm
Power unit FDPC75C3-B
linear differential sensor (Linear variable differential transformer) của van MSV 1000TD
Equivalent Expanda Cable Coil for soot blower IK-530EL
LVDT Sensor HY-6-100-15-D
Heating rod DJ-18
Inverter AAD03020DKT01
Pressure relief valve YSF16-70/130KKJ
tws proximity sensor CWY-DO-810800-50-09-02-01
linear sensor TDZ-1B-05
electromechanical pressure switch BPSN4KB25XFSP19
linear position control HL-3-250-15
Speed sensor CS-1G-D-065-02-00
Heat Expansion Sensor & Transmitter TD-2 0-50mm
Switch 162F1300
Speed sensor CS-1G-G-080-03-01
Anti-interference relay UEG/F-8DPDT
POSITIONER VALVE V18345-1010521001
INTERFACE BOARD EPSUPER-JKB-090214-A
Speed probe CS-3F-M16
Bolt electric heating rod ZJ-22-5
Limit Switch WLGCA2-2-TH
LVDT Sensor TD-1-0300-15-01
Bolt electric heating rod ZJ-20-39A
Solenoid Valve 2W-160-15
Water flow monitor LJZ-2 turbine parts
Chemical socking from Jeya Engineering has developed various systems to thaw frozen IQF, and both block shrimp and then soak in the same system. During and after the thawing, the shrimp can be, if desired, "soaked". After the thawing, additives are added to the water, the shrimp can absorb these additives for a certain period of time. During this soaking the fluid surrounding the product stays in motion.
After washing the headless materials it must be soaked in water with additives. For this purpose Soaking Agitator is used. This soaking agitator has a vertical rotating shaft in which leafs are mounted. This shaft is rotated at the desired speed. Tubs are positioned at the bottom of the soaking agitator. The rotary motion enables the headless materials to be completely agitated and soaked. We manufacture two types of soaking agitator by taking type of operation into account.
Fixed type
Movable type
Some of the features of SS Soaking Agitators are :
Reduces labor involvement.
Nylon with PU coated swivel wheel not only improves aesthetics but also its mobility.
Fixed type agitators are supplied along with carefully designed Hexagonal soaking tank.
User friendly and Occupies lesser space.
Attachable for both side of front(pulley) and rear(bell housing) of the engine
Perfect brake system to prevent dragging
Monitoring function to see rotation
Anode zinc on oil cooler prevent the corrosion
Easy removal metal in oil with Magnet plug
Compatible Pump Pad to various pumps (If required, machining is needed)
Key features
Same rotation of output/input
Live pulley provided (9, C type, 3 grooves)
Versatility of Output Types
Attachable to both the front (pulley) and rear (bell housing) sides of the engine
Directly attachable with pump pad
Monitoring function to see the rotation provided when you choose pump as the output type
SAE C D pumps are available (if required, needs processing).
SAE C D adaptor provided
Pressure gauge provided as standard
Application
Propulsion device of stern drive
Clutch for powertrain
Drive for hydraulic devices or accessories
Diesel power unit system
Blade diameter 1.6m
Rated Rotated speed 200
Rated wind speed 8m/s
Rated power 300W
Max voltage 450w
Output voltage 12/24v
Start up wind speed 2(m/s)
Operating wind speed 3-35(m/s)
Security wind speed 50(m/s)
Height of tower 6m
Weight of top section 102kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 2pcs
can supply power for lighting, electric fan, charger.
Blade diameter 2.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 1000W
Max voltage 1500w
Output voltage 24V/48v
Start up wind speed 2.5(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 170/160kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 4pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.
Blade diameter 2.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 2000W
Max voltage 3000w
Output voltage 96v/48v
Start up wind speed 2.5(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 232/252kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 8pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.
