PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with FDN and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage.
Polycarboxylate superplasticizer (PCE) is a high-performance, water-reducing admixture for modern concrete applications. Utilizing advanced polymer technology, it offers superior slump retention and strength enhancement compared to traditional superplasticizers.
Performance Characteristics
--Water Reduction: 25-40% (vs. 15-25% for naphthalene-based)
--Slump Retention: Maintains workability for 2-4 hours
--Early Strength: 50-80% higher at 1 day vs. conventional SPs
--Compatibility: Works with all cement types (OPC, SCC, slag cement)
--Low Dosage: 0.1-0.3% by cement weight (1/3 of sulfonated melamine types)
Applications
1. Ready-Mix Concrete
Ideal for transit-mixed concrete requiring long workability
Reduces segregation in high-slump mixes (200-250mm)
2. Precast/Prestressed Concrete
Enables early demolding (12-16 hour cycle time)
Improves surface finish quality
3. Self-Consolidating Concrete (SCC)
Achieves 600-800mm flow without vibration
Maintains stability at low water/cement ratios (0.28-0.32)
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Polycarboxylate Superplasticzier we produce types as below:
1. High water reducing type
(normally they can be satisfied for concretes' requirements):
JH03 basic standard type(under most exported.)
JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.)
JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.)
2. Water reducing and slump retention type
JH02 water reducing and slump retention type.(New Research on base of JH03.)
3. High slump retention type
JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.)
Exporting loading: 20'GP container loading:
1. 220kg/drum, 80 drums
17.6 T
2. 1150kg/drum,20 drums
23 T
3. 20-25tons/flexitank.
20-25 T
* High water reduction, low dosage. The water reducing rate can reach 20%-40% with recommended dosage.
* Early and high strength. The early strengthand 28 day strength have been obviously improved.
* Low slump loss: complywith the pumping agent standard, slump loss would besignificantly reduced.
* High durability: This product can effectively
reduce the W/C ratio, improve durability.
* It can be used as a mother liquor to produce other functional admixture, such as early strengthtype, retarder, pumpingconcrete admixture, antifreezer, etc.;
* Environmentalfriendly products: the production does not pollute the environment;
* Non-corrosionon steelbar.
Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE.
Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications.
Application
As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects.
In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability.
Features and Benefits
Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation.
2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L.
3. Excellent compatibility with various types of cements.
4. High Water Reducing Rate: Low dosage, and low slump loss.
Low chloride and alkali content, no corrosion to steel-bar.
6. High Stability: Neither precipitation nor layers at low temperature.
7. Environmental Friendly: Free from formaldehyde and nontoxic.
Uses and Dosages
1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type.
2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete.
3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred.
4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it.
5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor.
6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand.
7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement.
8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals.
Package, Storage & Handling
1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg.
2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place.
3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked.
Description
Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE.
Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications.
Application
(1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway.
(2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability.
Features and Benefits
1. Excellent compatibility with various types of cements.
2. High Water Reducing Rate: Low dosage, and low slump loss.
3Low chloride and alkali content, no corrosion to steel-bar.
4. High Stability: Neither precipitation nor layers at low temperature.
5. Environmental Friendly: Free from formaldehyde and nontoxic.
Uses and Dosages
1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type.
2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage.
3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred.
4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor.
5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand.
6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it.
7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement.
8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals.
Package, Storage & Handling
1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank.
2. Store it in covered containers and keep it from rain, sundry, and evaporation.
3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked.
Description
Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE.
Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications.
Application
(1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway.
(2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability.
Features and Benefits
1. Excellent compatibility with various types of cements.
2. High Water Reducing Rate: Low dosage, and low slump loss.
3Low chloride and alkali content, no corrosion to steel-bar.
4. High Stability: Neither precipitation nor layers at low temperature.
5. Environmental Friendly: Free from formaldehyde and nontoxic.
Uses and Dosages
1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type.
2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.
When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration.
3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred.
4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor.
5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand.
6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it.
7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement.
8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals.
Package, Storage & Handling
1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank.
2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation.
3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked.
This type of product has a higher water reduction rate,
which is higher than JS-103, and has ultra-high slump protection performance. It is
especially suitable for the environment with poor materials or summer with high
temperature. Compared with the polycarboxylic acid mother liquor on the market, it can
reduce the consumption of slump protection mother liquor by 20%-40%.It is mainly used
in high-strength concrete with high requirements, and its products are mainly used in
high-speed railway and high-speed railway Road, hydropower and other large
engineering projects pumped concrete, super fluid self-compacting, high strength and
high performance concrete and commercial concrete.
Product Feature
1.It has a higher water reduction rate and a higher slump protection performance,
especially for the concrete with great loss in time.
2.High water reduction rate and low dispersion velocity.
3.The comprehensive cost performance is high, especially suitable for summer, high
temperature environment.
We are the leading and well-established manufacturer of PCE Superplasticizer(water reducer & slump retention) and Raw Materials of PCE Superplasticizer, like HPEG/TPEG/LPEG/VPEG, etc. It would be a huge honor for us to be one of your suppliers with full capability of meeting your demands. Also we are factory direct and have the economy of scale with ISO9001:2015 quality management system passed.
If interested, samples are available for quality checking and examination along with competitive and economical price,
thanks for your time and looking forward to your reply and the possibility of working together!
Product Name: Polycarboxylic Monomer (PCE Monomer)
Appearance: White flakes
Function: Raw material for polycarboxylate ether (PCE) synthesis
Type: TPEG / HPEG / MPEG / APEG (customizable grades available)
-- Product Description
Polycarboxylic Monomer is an essential raw material for synthesizing polycarboxylate ether (PCE) superplasticizers, widely used in modern concrete admixture formulations. These monomers, such as TPEG (TPEG 2400/3000), HPEG (HPEG 2400 /3000), and MPEG/APEG, are polyether-based macromonomers that provide excellent water reduction, dispersibility, and workability in high-performance concrete.
Our polycarboxylic monomers offer high reactivity, narrow molecular weight distribution, and consistency, ensuring superior quality in the final PCE products.
-- Main Applications
PCE Superplasticizer Synthesis:
Used as a core monomer to produce polycarboxylate-based water-reducing agents for concrete
Copolymer Formulation:
Compatible with acrylic acid, maleic acid, and other vinyl monomers in free-radical polymerization
High-Performance Concrete (HPC):
Ideal for ready-mix concrete, precast elements, self-compacting concrete (SCC), etc.
Cement & Mortar Additives:
Enhances fluidity and strength development in dry mix mortars and cementitious systems
-- Product Advantages
Excellent Water Reduction: Enables >30% water reduction when used in PCE formulations
Improves Concrete Workability: Delivers superior slump retention and dispersion
High Reactivity: Enhances polymer conversion efficiency and performance consistency
Customizable Grades: Available in TPEG, HPEG, APEG, MPEG and other molecular designs
Eco-Friendly: Contributes to low-VOC and energy-saving admixture systems
Stable Supply & Quality: Produced under strict QC with consistent molecular structure
-- Packaging
Standard: 25kg/bag or 640kg/bag
Custom Packaging: Available on request for OEM or branded clients
-- Storage Conditions
Store in a cool, dry, and ventilated warehouse
Keep containers tightly sealed, avoid exposure to heat or direct sunlight
Shelf life: 6 months
-- Transportation Conditions
Non-hazardous, can be shipped by sea, land, or air
Avoid freezing or prolonged heat exposure
Follow standard chemical handling and labeling practices
Product Description: "This product is one of Sebchem Key products
Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO.
Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels"
Price of product ( USD price or FOB price): USD
Product origin: Multiple
Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA
"
Product Description: "This product is one of Sebchem Key products
Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO.
Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels"
Price of product ( USD price or FOB price): USD
Product origin: Multiple
Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA
"
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Polycarboxylic acid superplasticizer is a high-performance water reducer and a cement dispersant in the application of cement concrete. It is widely used in highway, bridge, dam, tunnel, high-rise building and other projects.
This product is green, non flammable, non explosive, and can be safely transported by train and car.
polycarboxylic acid superplasticize, because it truly designs an effective molecular structure based on the action mechanism of dispersed cement, has a super dispersive type, can prevent the loss of concrete slump without causing obvious retarding, plays a high plasticizing effect at low dosage, has good liquidity retention, the cement is adaptable to a wide range of molecular structures, has a large degree of freedom, many synthesis technologies, and has a lot of room for high-performance, and has a significant strengthening effect on concrete, It can reduce the shrinkage of concrete, and the content of harmful substances is extremely low. The technical performance characteristics give concrete excellent construction workability, good strength development, excellent durability. polycarboxylic acid superplasticize has good comprehensive technical performance advantages and environmental protection characteristics, which meets the needs of modern concrete engineering. Therefore, polycarboxylic acid superplasticize is gradually becoming the preferred admixture for preparing high-performance concrete.
1. It has good compatibility with all kinds of cement, good slump retention performance of concrete, and prolongs the construction time of concrete.
2. Low dosage, high water reduction rate and small shrinkage.
3. Greatly improve the early and late strength of concrete.
4. This product has low chloride ion content and low alkali content, which is conducive to the durability of concrete.
5. The production process of this product is pollution-free, formaldehyde free, in line with ISO14000 international standards for environmental protection management, is a green environmental protection product.
Product Name:polycarboxylate superplasticizer
Delivery:Within 15 days after payment.
Specification
Items Specification
Appearance white or light yellow powder
PH 8-10
Water reducing rate 25% min
Contact us:
Whatsapp/skype/Wechat:eight six one five nine six three one two eight seven six one
Email:alian(at)jfchentech.com
Supplier: Shandong Jufu Chemical Technology Co., Ltd.
Add: Room 457, Building No.1, No.88 of Huizhan West Rd., High-tech Zone, Jinan, China---250101
PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with FDN and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.
With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
