Features:
1. Lenovo PC , windows 7 operation system, Chinese-English interface screen.
2.All production data will be backup automatically,which is suitable for the ISO9000 management.
3.Fault Intelligent Diagnosis,display alarm and list out.
4.15% heat transferring efficiency was improved ,which is more suitable for the LEAD-FREE welding process.
5.Guide rail is through the special heat treatment, it's hard to out of shape.
6.The main hanging is reinforced, which can avoid the deforming and PCB jamming.
7. Siemens PLC control, more durable and stable.
Product Name
Competitive Price Reflow Soldering Oven PCB Reflow Soldering Machine From China
Model
HS-0802-LF
Specifications about heating system
Quantities of heating zones
Top8 /bottom8
Length of heating zones
3500mm
Quantities of cooling zones
Up 2 ,Down 2
Specifications about conveyor
Width of conveyor
50~400mm
Max width of PCB
400mm
Conveyor direction
R to L (option: L to R) (customized)
Fixing conveyor rail
Front rail fixing/rear rail fixing (customized)
Height of conveyor
900±20mm
Conveyor
Chain conveyor and meshwork conveyor
Conveyor speed
0~2000mm/Min
Specifications about controlling parts
Power
5 line 3phase 380V 50/60HZ with UPS delay power off
Total power
50KW
Start power
26KW
Normal working consume power
Approx. 4.7KW
Heating time
Approx. 20min
Temperature range
Room temperature~~~350
Controlling way
PID closed loop control, SSR drive
Temperature control accuracy
±1
PCB temp. Deviation
±1.5
Abnormal alarms
When temperature is abnormal(too high or too low) & When the PCB board drops
Signal lamp
3 lamps: yellow-rising; green- constant; red- abnormal
Cooling System
Cooling method
Forced air /Air cooler is option
Specifications about machine
Dimensions(mm)L*W*H
5400*1370*1555mm
Weight (Approx.)
2200kg
HR-SD100 is an endeavor in reverting and recycling the oxides which occur during working of a Wave Soldering Machine in order to reduce production cost, create a greener environment and assist the quality process.
Use special stirring system to melt the tin residues in the tin container and separate tin and ash in the separation container by the high speed of screw rotation.
1.Characteristic:
1.Highly effective recycling of the solder waste, up to 90% yield .
2.No need to add any chemicals or reducers to the process uses physical separation to ensure a good quality product.
3.Button controls, digital temperature control sheet, accurate temperature control.
4.All-stainless steel tank, clean convenience.
5.316 grade stainless mixing bowl with an 10kg capacity with heating power for complete mixing.
1.Use Windows operation interface, easy to operate;
2.Leading heating mode, solve the corner when the reflow soldering welding problem, suitable for CSP, BGA, 0201 chip, and other electrical components of the welding;
3.Professional rotor design, wind speed stability, effectively prevent the PCB heating uniformity of the wind, to the repeated heating of the highest;
4.Compulsory independent loop to various temperature zones, independent PID control, and independent heating mode, make the furnace chamber temperature accurately, even, heat capacity is big.
5.Thermal insulation layer is made of high quality aluminum silicate insulation materials, heat preservation effect is good, warming faster, from room temperature to the working temperature of 15 minutes.
6.Furnace, lead-free green design;
7.High quality high temperature and high speed motor transport wind smoothly, little vibration, low noise;
8.Furnace using cylinder jack-up, safety rod support, safe and convenient;
9.The transmission way of PCB machine adopts automatic electronic speed, chain network ,synchronization, good stability;
10.Special high quality aluminum alloy guide, automatic refueling system, ensure guide rail adjusted the service life of the high precision and wide;
11.Equipped with UPS power protection function, ensure the normal output after power PCB, avoid damage;
12.Powerful software function, the PCB online temperature measurement, and analyze the data curve at any time, storing and printing;
13.PC and PLC communication with PC/PP agreement, stable work, put an end to crash;
14.Automatic monitoring and display equipment working state;
15.Special furnace design, good heat preservation, adopt special heating element, heat with
highefficiency, power consumption of the lowest.
If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,
Soft soldering tin lead solder wire sn63pb37, with rosin cored flux 1.5--2.2%, diameter 0.35--6.0mm available, packed in spool 1kg, 500g, 1lb..... Or tube 20g, 15g....
Tin lead solder wire sn60pb40
With rosin cored flux 1.8-2.2%
Diameter 0.35-6.0mm available
Packed in spool 1kg, 500g, 1lb, 250g, 200g.... Or tube 20g, 10g...
Melting temperature 183-190â??
Density 8.5
Use pure materials, not recycle, good quality
Tin lead solder wire with rosin cored flux 1.8-2.2%
Diameter 0.35-6.0 mm
Packed in spool 1kg, 500g, 1lb, 250g, 200g... Or tube 20g, 10g...
Melting temperature 183-215
Use pure materials, not recycle, good quality for soldering results.
Model
JAGUAR A6
Heating System
Number of heating zones
UP 6/BOTTOM6
Number of cooling zones
1
Length of heating zones
2400MM
Heating mode
Up:hot air; bottom: IR
Cooling Mode
Force air
Conveyor System
Max. Width of PCB
350mm
Mesh belt width
400mm
Transmission Direction
LR(or RL)
Transmission Net Height
880±20mm
Transmission type
Mesh
Conveyor speed
0-1000mm/min
Fixed rail side
Front rail fixed(option:rear rail fixed)
Control system
Power supply
5 line 3 phase 380V 50/60Hz
Total power
28kw
Starting power
24kw
Normal power consumption
4KW
Warming time
About 20 mins
Temp. setting range
Room temperature-300
Temp. control method
PID close loop control & SSR driving
Temp. control precision
±1
Temp. deviation on PCB
±2
Data storage
Process Data and status storage
(80 GB)
Nozzle plate
Aluminum Alloy Plate
Abnormal Alarm
Abnormal temp. (extra-high/extra-low temp.)
Board dropped alarm
Tower light:yellow-warming, Green-normal, Red-abnormal
General
Dimension(L*W*H)
35007001320mm
Weight
600KG
Color
Computer gray
Model no.:wh-1000
External size:l5785*w1350*h1600mm
Control mode:computer control¼brand host with aoc monitorione keyboardups.
Furnace section:stainless steel fabricates by dual brake lift-up. 8 heating modules in both up and down deck which enable hot air cycle and independently control the temperature.
Cooling sectionstrong wind cooling(two cooling zone)
Transmission section:slide way+ retiary belt(use the carbon steel transmission chain and stainless steel retiary belt)¼conveying speed controlled by the computer closed loop¼conveying slide way controlled by computer and manual operation. Computer controlled chain auto-lubrication system by timing.
Power switch:on-line ups without switching. Auto-time-delay switch system.
Recycle section:auto collection of soldering fluxdischarging device.
Transmission direction:lr(rl), optional.
Abnormal alarm:standard deployment
Board-dropping alarm:standard deployment
Optional item:
1industrial pneumatics cooling 2nitrogen gas device 3central supporting¿no retiary belt 4, dual lead rail
Chemical properties: A soft metal (face-centered cubic) with a blue-grey color and metallic luster. Melting point: 327.5â??. Boiling point: 1740â??. Relative density: d1811.3437. Soluble in nitric acid and hot concentrated sulfuric acid, insoluble in water. Uses: Used in compound semiconductors, refrigeration elements, infrared photoelectric conversion devices, high-efficiency temperature difference elements, and solders, etc. Uses: Used as analytical reagents and reducing agents Uses: Used as high-purity analytical reagents and reducing agents Uses: Used in the manufacture of cable sheaths, storage batteries, lead alloys, pigments, ammunition, sulfuric acid production equipment, and can also be used as X-ray protection screens, nuclear reactor equipment, etc. Uses: Used in storage batteries, cables, solders, etc. Uses: Used in cables, storage batteries, babbitt alloys, type alloys, and materials for X-ray protection, etc. Uses: Reducing agent for determining tin; reducing high iron to ferrous iron; used for the separation of iridium from platinum and rubidium; alloy manufacturing Uses: Mainly used in cables, storage batteries, lead smelting, scrap copper smelting, printing, solder, etc.
Lead-free solder wire with SGS certificate
Diameter:0.35-6.0mm
Packed in spool or tube, unit weight 1kg, 500g, 250g, 1Lb....
No clean for general soldering
Solid wire, acid cored flux or rosin cored flux 2.0-2.5%
Introduction:
White or colorless crystalline free flowing solid, efflorescent in air, easily soluble in water, but insoluble in alcohol, its water solution is slightly alkaline, relative density at 1.63, melting point at 34.6�ºC. In 100�ºC water of crystallization anhydride, lost 250�ºC is decomposed into sodium pyrophosphate.
Application:
It can used as a water softener, fabric weight agent, fire retardant, and is used to glaze, solder medicine, pharmaceuticals, paints, food industry and manufacturing ,water treatment agent, printing and dyeing detergent, quality improver , neutralizer, antibiotics train agents, biological and chemical treatment agent of food quality improver.
Zinc chloride is used as a soldering flux, catalyst, dehydrating and condensing agent, battery electrolyte, and metal etchant. It is used as a glazing flux in glassblowing and in glass etching, mordant in dyeing and printing, sizing and weighting fabrics, mercerizing cotton, and carbonizing woolen products. It is utilized in conserving anatomical samples, embalming products, wood preservative and deodorants. It is also employed in organic synthesis.
Sales Specification
Assay: 97.00% Min
Appearance: White
Iron(Fe): 10 ppm Max
Lead (Pb): 10 ppm Max
Zinc Oxide: 1.50% Max
Sulfate: 0.015% Max
Packing
55.12 Lb bag, 40 bags per pallet
DOT Transportation
UN No: 2331
Proper Shipping Name: Zinc Chloride, anhydrous
Hazard Class: 8
Packing Group: III
Combustion Residue: Low, with a residue value of 2
Applications:
Brazing and Soldering: Commonly used for HVAC, plumbing, and automotive applications. The high flame temperature allows for quick and efficient metal bonding.
DIY and Professional Use: Excellent for home projects or professional work requiring high-heat applications, including light welding, brazing, and copper pipe soldering.
Metalwork: Can be used for joining copper, steel, brass, and other metals, making it a versatile choice for small to medium-scale projects.
Benefits:
Higher Heat Output: With a maximum temperature of 1368C, MAP Pro gas is hotter than standard propane, making it suitable for tasks that require intense heat.
Quick and Efficient: Burns hotter and faster, reducing brazing time and ensuring quicker project completion compared to standard propane.
Portable and Convenient: Lightweight cylinders that are easy to carry and store, making it ideal for on-site work.
Safe and Reliable: Colorless and non-turbid gas for clean and reliable combustion. It also provides consistent pressure for steady performance.
Packaging:
Cylinders: Each cylinder contains 400g (14oz) of gas.
Cartons: Typically packed in 12 cylinders per carton.
Container Capacity: 17,088 cylinders per 20ft container.
Stannous Chloride Anhydrous is a strong reducing agent and is used in many industrial processes, such as manufacturing dyes, phosphors, and polymers. The compound is a major ingredient in acid tin plating baths. Other uses are a mordant in dyeing; an additive to lubricating oil to prevent sludging; a stabilizer for perfume in soaps; in removing ink stains; a sensitizing agent for glass, paper, and plastics; and a soldering flux. Stannous chloride Anhydrous is used for preparing a number of tin(II) salts. It is a catalyst in many organic reactions. It is a common laboratory reagent.
Properties
Density 3.95 g/cm3
Composition Sn (+2) = 62.6%, Cl = 37.4% (Theoretical)
Melting Point 246 C (475o F)
Boiling Point 652C (1206o F)
Specifications
