WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish.
FEATURES :-
WALL GUARD
PUTTY
1. Provides smooth and uniform finish to rough plasters
2. Good Workability
3. Does not require curing with water
4. Good water resistance
5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength
6. Controlled water vapour permeability
7. Excellent abrasion resistance
8. Resists growth of algae and fungi on wall
9. Good intercoat adhesion to emulsion paints
RECOMMENDED APPLICATION :-
It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : 6-8 HOURS
GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA :-
ABRASION RESISTANCE : Excellent
WATER RESISTANCE : Excellent
SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint.
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
PW 2507_Stucco Putty Exterior
Ritver Stucco Putty Exterior is carefully formulated using an Acrylic copolymer emulsion. It is primarily used for filling surface irregularities, construction flaws, hairline surface cracks & indentations.
ARP333
NC PUTTY
A Nitrocellulose-based putty formulated for application on car exteriors, offering an effective solution for imperfection correction and surface enhancement.
The nitrocellulose component ensures rapid drying, enabling efficient smoothing and contouring of surfaces.
ARP331
NC PUTTY - COMBI MIX
A fiber reinforced high-build polyester putty; specially formulated to offer excellent adhesion, strength and ease of application on fiber parts, metal and steel.
A High viscosity, quick drying clear Nitrocellulose Putty, exhibits very good smooth filling with easy sanding properties containing special additives that provide excellent adhesion properties and high solid contents that ensure excellent filling capacity on porous wooden substrates
Ideal for use on all types of solid wood, veneers, natural or stained. This type of putty is designed especially for filling cracks, imperfections, and similar uneven surfaces of wood.
is based on an acrylic copolymer formulated with pigments with good alkali-resistant pigment.
Exterior & Interior Wall Putty is used for smoothening the out wall surface
It protects walls from water sipping and enable the topcoat to adhesion and strong outlook
PP8001SH
FIBER POLYESTER PUTTY
A fiber reinforced high-build polyester putty specially formulated to offer excellent adhesion, strength and ease of application on fiber parts, metal and steel.
Payments:This supplier also supports L/C payments.
Quick Details
Place of Origin:
GBA-Alderney
Usage:
Building Coating
State:
Emulsion
Model Number:
REGENT GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Main Raw Material:
GYPSM PUTTY
Brand Name:
REGENT GYPSM PUTTY
Supply Ability
Supply Ability:
20000 Ton/Tons per Year
Packaging & Delivery
Port
Jebel Ali
Lead Time :
As per your Requirement
Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion
Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc
Properties:
Colour: White
Finish: Smooth
Solids: 70%
Specific gravity: 1.65 +/- 0.03
Theoretical Coverage: 2 �¢??3 m2/ltr
Drying time : At 25
To handle: �½ hour
To Recoat: Over night
Number of coats: 1
Precautions:
Keep from freezing, contains water.
May cause eye , nose, and throat and skin irritation.
Keep out of the reach of children
Packing:
Metal drums one US gallon, 5 US gallons
Category: Emulsion. Tags: gypsm putty, putty.
Place of Origin: Alderney
Main Raw Material: Gypsm putty
Packaging & Shipping In 25kg paper bags inner with PE bags
Bulk Shipping:
We ship 20 feet containers. It will accommodate
1 US gallon x 4000 CANS
5 US gallon x 950 buckets
1000 liters x 18 Totes
Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
BuildWell Colour Putty is a wall putty with added advantage of shades like Pink, Yellow, Green and
Off-White, especially developed as a base coat to provide smooth finish on plastered surface, and hence
ideal for expensive paint application because paint saving can be up to 50%.
It contains finest quality minerals, polymers, white cement and pigments. It can also be used for low end
application like basement parking lot, etc as 'Final Finish'.
Benefits :
- Reduces paint consumption
- Avoid frequent repainting.
- Cost effective.
- Aesthetic look for ceiling and Interior walls.
- Ease of use at site.
Advantages :
- True colour tone of the paint is
maintained, primer is not required.
- Protects expensive paint from dampness,
peeling off, and flaking.
- Makes paint durable.
- Suitable for Interior.
- Paint finish is superior.
Ergonomic putty knife manufacturer
From putty knife tools to spackle scrapers, we deliver reliable putty blades with handles for professional surface preparation.
A paint putty knife is a versatile hand tool with a flat, flexible blade, used for applying, scraping, or smoothing materials like putty, paint, or drywall compound. Its durable steel or plastic blade and ergonomic handle ensure precision and ease in construction or repair tasks. Ideal for DIY and professional use.
High-Precision putty knife painting for Professional Surface Preparation
Pengyu offers putty knife tool with flexible, durable blades crafted from high-quality steel or plastic, designed for precise application and smoothing of putty, paint, or drywall compound. These tools ensure flawless surface preparation, making them essential for B2B clients in construction, renovation, and drywall installation, where accuracy is critical for professional-grade finishes.
A plastic spackle knife is a lightweight, flexible tool used for spreading, scraping, or smoothing materials like putty, spackle, or paint. It's non-conductive, rust-proof, and ideal for delicate surfaces.
As a professional plastic putty blade manufacturer in China, Danyang Pengyu Tools Co., Ltd has professional plastic putty knife for sale. Feel free to contact us for plastic putty knife price and other information now.
For more information about paint supplies, please feel free to contact us!
item
steel strip
Standard
AISI, ASTM, BS, DIN, GB, JIS
Place of Origin
China
Material
Hot Rolled
Surface
Polished
Application
shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade
HPMC is hydroxypropyl methylcellulose is water-soluble, non-ionic polymer that is commonly used as a thickener and water retention agent in a variety of applications- tile adhesives, wall putty, EIFS- the compound forms colloids when dissolved in� water. This non-toxic ingredient is combustible and can react vigorously with oxidizing agents.
Duc Thinh New Materials Technology Co., Ltd produces high-purity uncoated calcium carbonate powder (CaCO3 >= 98,5%) from natural white limestone in Vietnam.
Our advanced grinding technology ensures uniform particle size, high brightness (R457 >= 95%) and smooth surface finish.
The product provides excellent whiteness, opacity, and dispersion, making it ideal for interior & exterior paints, wall putty, paper, and rubber.
With stable quality and competitive price, Duc Thinh CaCO powder is the preferred choice for many manufacturers in Asia.
