This product is equipped with the up-down movement, four-wheel driven massage mechanism with muted voice design.
Automatically check the upper body massage points, shoulder position check and adjustment.
Programmed 9 kinds of traditional classic massage functions to imitate the humaní»s hands sense:kneading, knocking, flapping, shiatsu, stretching, synchronous kneading
And knocking, pressing, heat treatment and vibrating.
Designed with 3 auto massage functions for the upper body.
In the manual massage mode , the massage functions all can be selected and the intensity, speed, width and position all can be adjusted.
Designed with air pressure massage function of the lower body (35 air bags are equipped inside), there are 6 modes.
Mp3 music function:the back mechanism massage speed and virbration intensity are changed along with the frequency of the music.
Backrest and foot rest ascending and descending function.
Equipped with a jade heater in which 5 helium-neon bulbs use 5 jades as infrared emitter, the temp can be adjusted between 40íµ-70íµ
15-30 minutes auto timer function.
Restore automatically when turn off the power.
Slide illumination:-
By rheostat controlled 6v lamp for each slide. After image illumination by 6v lamp
Auto flashing:-
Auto flashing of slide illumination either simultaneously or alternatively in rapid & variable modes
Mode & mode selection:
Five modes of slide illumination namely normal, flashing right, flashing left, flashing r+ l & auto flashing can be selected by a single selector knob.
Dimensions:-
Longitudinal: 30.3 cms
Lateral: 25.5 cms
Vertical: 36.5 cms
Weight: 20 kgs
Power supply: 220 v ac / 110v
Standard accessories:-
A set of slides containing 9 pairs, one power cord, one dust cover, spare 6v bulbs (2 nos)
Optional accessories:-
Instrument table: manual or motorized
Haidinger brush attachment.
Main specification:
Reed width: 180cm, 200cm, 230cm, etc.According to the customers need.
Rotation speed(r.P.M):220-240
Weft selection:4colors
Number of heddle frame: 16pages
Electrical control:p.L.C
Power(kw):1.5-1.8
Dobby open-end device: adopting gt221 high speed dobby(engine drive)
Dobby feathers:
Adopts advanted maching methods and technology, guarantee the balance of the frame movement.
Adopts rigid driving.Suitable for the production of weighter fabrics.
High precision, low voice.
Dobby parameters
Composition:dobby and dobby heald reversing motion
Type of shedding: double lift full open
Method of mounting:in high position, left and right side
Lifting units: 20(include colorselecting)
Pitch:12mm
Signal reading method:cycle card
Lubricate:semi-auto lubricating
Suitable speen for looms:280r/min
Suitable reed width for looms:140cm-380cm
Signal features
Advanced instructure, suitable for higher loom speed.
Stable driving, safety and reliable movement.
Suitable for weaving more complicated patterns.
Easy and rapid for changing the variety of the fabric patterns.
Characteristics:
1, Germany-High-precision ball screws Preload Consumers gap, the movement to reduce the gap to the minimum.
2, 4 imports Pai ball linear guides, self-lubricating block so that the direction of force equal to ensure that the mechanical precision and intensity.
3, the application of the breakpoint memory, guaranteed in the accident (Duandao) or the next day, under processing.
4, a number of workpiece machining unique way to preserve the original point.
5, gantry movement, strengthen the surface, sturdiness and durability, prolonged use of distortion, so that more precise positioning accuracy.
6, produced not only signs without serrated carving fine, smooth contours clear bottom, and also cut 2 cm plexiglass ease.
7, the channel bed and casting bed for election
Machine Model QL-1212
X.Y working area 1200*1200mm
Z working area >100mm
Table 1300*1420mm
Max. Speed 5m-6m/min
Max. working speed 2m-3m/min
Max. feeding height 110mm
Working delicacy 0.005mm
Repositioning accuracy 0.05mm
Command G code*.u00*.mmg*.plt
Surroundings for software windows98/2000/xp
Power (spindle is not included) 400w
Working voltage AC220V/50Hz
Spindle power 1.5kw
Spindle rotating speed 0-24000rpm/min
Drive motor Steper
Woodmaster post forming machines are developed for producing a wide range of modular furniture products such as kitchen cabinet tops, cabinets, doors, worktops, front panels tops for tables, desks drawers units, wardrobes shelves & side panels.
Woodmaster post forming machine is very easy to set up and operate and can be easily adjusted for different profiles and sizes. In it work piece is held by pneumatic pressure. Glue is applied to the work piece and laminate either manually or with the help of a spray gun. After applying the glue and holding the work piece at a proper place the forming bar of the machine with seven pneumatic cylinders and an electric heater laminate sheets are bend around on a profiled work piece at required pressure. Woodmaster post forming stops and goes movements insure proper bonding of laminate with the work piece. The stop and go movement time can be easily adjusted for different laminates. Provisions are provided for in between stop for bull-nose and quarter round work pieces and time of stop can be adjusted according to laminate for proper bond. Digital temp controller is provided to ensure automatic cutoff of temp at a specified temperature. After completion of the process the forming cylinder and the forming bar return to their starting position automatically in plc controled model of woodmaster post forming machine.
Export worthy at extra cost.
184 Pnc (Znc+Table Movement Auto Positioning) Edm Se Suppliers
Short on time? Let Pnc (Znc+Table Movement Auto Positioning) Edm Se sellers contact you.
When the switch is off, power supply is cut off.
When the switch is on, the light is on.
In a dim place (below 10 LUX), set the switch to Auto to activate automatic detection;
The night light automatically turns on when a person goes within the sensing range (at a frontal distance of up to 4 meters; at a horizontal angle of less than 90 degrees; at a vertical angle of less than 60 degrees), or goes off 30 seconds after the person stays still or goes away;
When the night light senses the continuous movements of a person within its range, it does not turn off until 30 seconds after the person stays still or goes away (In a baby room, start with the Auto position to reduce the sense of fear when the baby wakes up).
Network :gsm/gprs
Band :850/900/1800/1900mhz
Gsm sensitivity: less thaní¬102dbm
Gps chipset :sirf iii chipset
Gps sensitivity :-159dbm
Gps accuracy: 5m
Cold/ hot ttff :35/2s
Car charger :12í¬24v input, 5v ouput
Battery power :3.7v dc li-ion battery, 850ma
Battery life :about 72 hours
Operating temperature: -10ípc to +65ípc
Storage temperature: -20ípc to +70ípc
Relative humidity 5% to 95 %, non-condensing
Features
You can get targetí»s latitude and longitude by sms or gprs, and check position by google earth.
Auto report position.
Send the last location if it enters into the blind area.
Add or change username and password.
Monitoring and sos feature.
It will send an alert of geofence to the user when it breaches the restricted area.
It will send an alert of movement to the user when it begins to move.
It will send an overspeed alert to the user when the target moves exceed of the restricted speed.
It will send a low battery alert to the user if the battery is low.
Applications
Vehicle for rental or manage of outside equipment, etc.
Protect the elder, kid, employee and pet, etc.
Protect the businessmen.
Manage the outworker.
Covert tracking.
Product Feature:
1.The C-body design, whole body cast, high rigid.
2. All hydraulic systems, greater pressure, stable and reliable performance.
3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm.
4. Downward movement with the fast and Feeding speed£¬the fast forward improve work efficiency£»feeding speeds can be adjusted to protect the mold and improve product quality.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6.Key and Foot Switch two cycle start modes.
7. Under cylinder can be configured to facilitate part to taken out(Optional).
8. Infrared protection can be configured (Optional).
Technical Parameters:
Theoretical output pressure 30KN(3t)
Rated oil pressure 10Mpa
Max stroke 150mm
Max Opening Height 230mm
Throat Depth 140mm
Fast-forward speed 120mm/s
Feeding speed 10~80mm/s
Return speed 110mm/s
The size of the working table 410 X 280mm
The height of the working table 720mm
Size of the mold mounting hole 32mm
Power of motor 2.2kw
Power(3AC,50Hz)380V
Weight 420kg.
Features£º
With auto-interpretation function can assist doctor to diagnose
Color lcd makes the images more clear for guaranteeing the reliability of the images
Designed with technology of digital signal processing and digital isolation
Synchronously 12 lead acquisition and printing 3 live leads record of them, using high resolution thermal roll paper for recording ecg waveform, multiple optional digital filter ( including baseline drift filter ), using auto-regulation baseline drift filter which can inhibit any baseline drift , or curb caused by patient's movement and auto- optimize the position for printing
Auto measurement / analysis system shows the real-time heart rate which makes it easier for
Doctor's diagnosis
Can store maximum of 100 patients' ecg data and enable user to replay data analyze and print it
From database
High-speed usb interface and traditional rs-232 interface are both built¨cin for communicating
With computer as well as other devices
Data can be received through one of the interfaces and displayed by the software which is also
Provided by our company (optional)
Specifications:
Lcd display: 640¡á480 tft 5.7 inch graphic lcd
Features
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and fiber identification
• User-selectable fiber clamping method – sheath clamp or fiber holders
• Auto-start tube heater feature
• Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
• Simultaneous battery charge and splicer operation
• Long life battery (up to 160 splice/heat cycles per charge)
• Detachable work table incorporated into the transit case
• Data and video download software and splicer upgrade software included; software
upgrades through PC application via the internet
• Green friendly – RoHS & WEEE compliant.
Application Industry:
FORSUN CNC automatic feeding laser cutter meets the demand of large-format cutting, suitable for shoes, fabric, cloth, leather, textile, cloth cutting, punching, etc.
Widely used in various leather and leather materials such as genuine leather, artificial leather, soft leather, decorative leather, packaging leather, cotton, real silk, various chemical fibers, denim, velvet, and other textile materials or non-woven materials
Advantages of laser cutter:
Large-format processing can realize arbitrary graphics cutting, smooth cutting without flash, automatic closing, no deformation; blanking, and processing of the whole piece of cloth. Fully automatic feeding, saving time; the feeding system adopts a B-shaped belt table and automatic crawler feeding device to facilitate the free movement of processed objects on the cutting table. It can also be equipped with a feeding rack with an automatic correction function to ensure accurate feeding.
Features of automatic feeding CNC laser machine:
1). Square tube welding Heavy bed CNC machining center finishing treatment.
2). Y-axis motor transfers in the middle, balanced force.
3). Fan independent switch can be switched on and off at any time to reduce noise.
4). The whole machine is equipped with a leakage overload protector
5). Special mold for laser tube holder, no need for dimming.
6). 0.25 filament optical frame, the optical path is more stable.
About Us:
Jinan FORSUN CNC Machinery Co., Ltd., one of the professional Wood CNC Router manufacturers and suppliers in China, has been focusing on providing high-quality CNC Router Machines and solutions for worldwide customers for 20 years. Main computerized CNC machine types: Wood CNC Router, 3d CNC carving machine, Wood CNC machine, ATC CNC router, Basic beginner CNC router, Mini desktop CNC router, Multi-Tool CNC machine, Rotary axis CNC engraver, 4/5 Axis CNC milling machine, CNC marble stone engraving machine, CNC plasma cutter, CNC foam cutter, CO2 laser cutting machine, fiber laser cutter, etc.
Forsun CNC Router helps you stay productive. We have the right CNC Router Machine tools for your application and weâ??re supporting you every step of the way.
PLX101 Series
High Frequency Mobile X-ray Equipment
PLX101/101A/101C
Rocker safety lock design, make your operate much safer
High quality x-ray monoblock assures more details, less dose
Symmetrical adjustable collimator for accurate positioning and better exposure protection
Aviation aluminum connectors, connection reliable, more safety
Advanced dislocation braking system, flexible movement, flexible braking
Multifunctional cassette storage box design
Features
Our high frequency technology assures the best image in every operating condition
Along with reduced patient dose and extended x-ray tube life time
The generator provide the right amount of penetration, reducing exposure times and retakes.
The parameter can be adjusted by the kV and mAs. Multiple security protect function such as over-voltage, over-current.
50 preset exposure programs allow extensive possibilities to optimize the exposure and processing parameters according to your preferences.
Fault automatic protection setting and fault alarming display
Parameters are automatically storage when power cut off.
Adopt rotating beam limiting device to adjust the X-ray field and angle freely.
Adopt manual controller and remote controller to do exposure.
Optional: PLXF152 mobile table for high frequency mobile X-ray equipment.
PLX101D is equipped with built-in battery, can take 200 films when full charged.
Rocker can move up and down, automatically balance
High quality X-ray monoblock can rotate in ±90
Options
PLXF152 Mobile Bed For Mobile X-ray Machine
Size: 2000 X 700X 500mm
Range of grid box movement 1210mm
Size of grid box: 430X 430(17 X 17)
Bucky Stand
Height: 1770mm
Vertical movement range: 470-1470mm
Grid density: 103L/inch
Grid radio: 10:1
Focus distance: 150cm
Maximum grid box: 17 X 17
PLX101 Series
High Frequency Mobile X-ray Equipment
PLX101/101A/101C
Rocker safety lock design, make your operate much safer
High quality x-ray monoblock assures more details, less dose
Symmetrical adjustable collimator for accurate positioning and better exposure protection
Aviation aluminum connectors, connection reliable, more safety
Advanced dislocation braking system, flexible movement, flexible braking
Multifunctional cassette storage box design
Features
Our high frequency technology assures the best image in every operating condition
Along with reduced patient dose and extended x-ray tube life time
The generator provide the right amount of penetration, reducing exposure times and retakes.
The parameter can be adjusted by the kV and mAs. Multiple security protect function such as over-voltage, over-current.
50 preset exposure programs allow extensive possibilities to optimize the exposure and processing parameters according to your preferences.
Fault automatic protection setting and fault alarming display
Parameters are automatically storage when power cut off.
Adopt rotating beam limiting device to adjust the X-ray field and angle freely.
Adopt manual controller and remote controller to do exposure.
Optional: PLXF152 mobile table for high frequency mobile X-ray equipment.
PLX101D is equipped with built-in battery, can take 200 films when full charged.
Rocker can move up and down, automatically balance
High quality X-ray monoblock can rotate in �±90�°
Options
PLXF152 Mobile Bed For Mobile X-ray Machine
Size: 2000 X 700X 500mm
Range of grid box movement 1210mm
Size of grid box: 430X 430(17 X 17)
Bucky Stand
Height: 1770mm
Vertical movement range: 470-1470mm
Grid density: 103L/inch
Grid radio: 10:1
Focus distance: 150cm
Maximum grid box: 17X 17
1,Acurate Localization:With appended head , Ultrasound localization becomes easier.
2,Longer therapy depth: With a 135mm therapy depth ,the treatment of the Obesity becomes more convenient.
3,Wider Aperture:A wider Aperture(200mm)gives more energy in breaking stones.
4,Lower pressure:Under the range of 3.5-6.5KV,one can feel less pain or even painless.
5,demountable electrode holder:It allows you to change the electrode more easier without draining the water and uncovering the cushion.
Specifications:
Range of discharge voltage
3.5-6.5kV
Peakpressure
20-50MPa
Lateral diameter of focus area
10-15mm
Discharge energy
12-36J
Discharge energy
12-36J
Front of the peak pressure pulse
¡Ü0.2¦ÌS
Width of half peak pressure
¡Ü1.0¦ÌS
Triggering mode
manual, auto.,
respiration and ECG
Life time of the electrode
¡Ý4000 times
Movements of therapy table
100mm in Y direction
100mm in X direction
140mm in Z direction
Rotation of US localization
around therapy head
360.
Features:
1. The cut veneers are absolutely parallel: this accuracy is obtained by the fact that the whole veneer bundle is under pressure while cutting, so that buckles in the veneers will be straightened out. The cutting movement is done on both sides of the veneer edges at the same time.
2. Timesaving (short working cycle) : thanks to the high speed movement on the working table by servo motor with 3 sets of linear guides and 2 sets of ballscrews , the operator can simply cut veneer bundles by just one button.
3. Movable laser line (veneer optimizing system) ¡V the manually operated laser line for the position of the front knife is quickly set. The veneer width is transferred to the computer at the push of a button. The cutting process is then started automatically.
4. Computerized control panel ¡V this user-friendly control panel is able to hold with more than 50 sets of different veneer width at the same time in a direct program mode.
Model: CutMate-3200D
Cutting Length: 3200 mm
Daylight Opening: 80 mm
Hydraulic Motor: 15 HP
Cutting Width: 30 ~ 470 mm
Moving Table (Servo Motor): 500 W
Machine Dimensions (L x W x H): 4900 x 1750 x 2005 mm
Hydraulic Tank Dimensions: 1130 x 535 x 990 mm
(L x W x H)
Net Weight (with Hydraulic Tank): approx. 7810 kg
* Technical data is not binding and can be modified without prior notice.
Consists of paper feeding unit, printing unit, slotting unit, die cutting unit and stacking unit.
Dual system control: the separate computer control desk and control panel are able to control the machine running independently.
Cnc(computer control center) large capacity menu storage, 9999 routine menu storage of automatic menu change and easy operation.
The data is transmitted by computer to realize the on-line check-up to solve the equipment communication errors and let the operation more simple and quick.
Forme plate cleaning memory: the forme plate position can be memorized and unnecessary to re-trial printing in case the machine stops for forme cleaning.
The front edge feeder with vacuum suction for easy operation and high accuracy.
The collision proof device is installed in the impression and slotting synchronous movement regulation section of slotting unit.
The die cutting rubber roller is equipped with the auto recovery system and differential speed compensation unit.
Main transmission gear moves precisely, for the sake of the part is made of quality steel alloy and teeth precisely milled to render them stable performance.
The key free connecting ring features in high precise transmission and accurate printing and registering.
Based on gsm/cdma/gprs (850, 900, 1, 800 and 1, 900mhz network and gps satellite positioning system.
Key specifications/special features:
Remote control the vehicle oil and circuit by mobile phone
1. Location and tracking: getting latitude and longitude by sms or gprs and check position by google earth or gprs software platform
2. Sos emergency alarm: send the sms message to the authority mobile number, when having the emergency situation by sos button
3. Voice surveillance: can monitor the 5m scope sounds around the tracker
4. Moving: target move out the setting scope, will send sms alarm message to the authority mobile number
5. Speeding alarm: target moves faster than set up speed, it will send alarm message
6. Real-time polling: report the location latitude and longitude data at anytime
7. Geo-fence: set up geo-fence for unit to restrict its movement in the limited scope
8. Auto track: set up the tracking time to get the auto latitude and longitude data at every setting intervals
9. Remote control the circuit: can remote control (cup down or restart) the target circuit by mobile phone to send the sms instruction
10. Remote control the oil: can remote control (cup down or restart) the target oil by mobile phone to send the sms instruction
11. Low battery alarm: battery is low power, the unit will send the message alarm
12. Non-signal alarm: will send the last message alarm when the unit enter into the blind area
13. All of our model supporting the gprs software platform internet real time tracking as long as the customer having the gprs software platform.
Applications:
Vehicle rental and fleet management
Protects child, old, disabled and pet
Provides peace of mind for businessmen
Manage personnel
Track criminals secretly
Dimension: 77*44*19mm .
Vehicle gps and gprs tracker with remote control and circuit by mobile phone.
Key specifications/special features:
Remote control the vehicle oil and circuit by mobile phone
Based on gsm/cdma/gprs (850, 900, 1, 800 and 1, 900mhz network and gps satellite positioning system to track the far-way object conveniently by sms message, internet gprs software platform or pda
Function:
1) location and tracking: getting latitude and longitude by sms or gprs and check position by google earth or gprs software platform
2) sos emergency alarm: send the sms message to the authority mobile number, when having the emergency situation by sos button
3) voice surveillance: can monitor the 5m scope sounds around the tracker
4) moving: target move out the setting scope, will send sms alarm message to the authority mobile number
5) speeding alarm: target moves faster than set up speed, it will send alarm message
6) real-time polling: report the location latitude and longitude data at anytime
7) geo-fence: set up geo-fence for unit to restrict its movement in the limited scope
8) auto track: set up the tracking time to get the auto latitude and longitude data at every setting intervals
9) remote control the circuit: can remote control (cup down or restart) the target circuit by mobile phone to send the sms instruction
10) remote control the oil: can remote control (cup down or restart) the target oil by mobile phone to send the sms instruction
11) low battery alarm: battery is low power, the unit will send the message alarm
12) non-signal alarm: will send the last message alarm when the unit enter into the blind area
All of our model supporting the gprs software platform internet real time tracking as long as the customer having the gprs software platform
Applications:
Vehicle rental and fleet management
Protects child, old, disabled and pet
Provides peace of mind for businessmen
Manage personnel
Track criminals secretly
Dimension: 77*44*19mm
CPU Operation system Embedded Linux OS
Microcomputer processor 32Bit RSIC Embedded Processor
Video Compression format M-JPEG
Signal system CMOS 300,000 pixel
Frame ratio PAL: 25fps, NTSC: 30fps
Resolution VGA(640*480), QVGA(320*240)
Picture adjust Brightness, contrast, chroma, saturation
Minimum illumination 0.1 LUX/F1.2
S/N ratio >48dB
Shutter speed 1/50s(1/60sú¬-1/100,000s
White balance Auto
Backlight balance Auto
Focus Manual/Auto
Lens Standard: 6mm Selected: 3.6mm
Nightvision Nightvision ª¦5 10 LED lightú¼Infrared distance is 10 m
Audio Processor One way audio
Audio gain (AGC)
P/T P/T control RS485 control inside
Revolution angle Level direction: 355íp , Perpendicularity direaction: 90íp
Revolution speed Level: 16íp/ Second Perpendicularity: 16íp/second
Rotation limitation 64 preset positions, 4 tracking lines
Network Network interface RJ-45 10/100Mb accept Ethernet
Delay time < 500 MSEL (0.50 second) in lan
Network procotol TCP/IPíóHTTPíóICMPíóDHCPíóFTPíóSMTPíóPPPoE etc.
Wireless 802.11b/g WIFI standard wireless network card inside
RTSP Support RTSP 3G cell phone monitor( support Nokia Sybiam S60 System, Windows mobile systemú¬
Online user number Max direct connection users is 15, but with no restrict on observe numbers by Forwarder Server
Network procotol Dynamic IP address,Static IP address, PPPOE
Other Use environment Indoor use
Material Plastic
Power DC 12V 2A
Temperature -10~50 ípC
Humidity 95% RH
Size Item size: 150mmx125mmx120mm (LxWxH)
Packaging size: 170mmx170mmx170mm (LxWxH)
Weight NW: 565g GW: 1015g
Attachment Adaptor, CD (including introduction), Manual, bracket
Alarm Input/output 1/1
Alarm detector Motion detection setting
Intelligent Motion detection Support 16 Regional Motion Detection
Alarm action Support Email photoíóFTP photoíóFTP videoíómessage,etc.alarm
System System deployment Microsoft Win98 SE/ME/2000/XPíóVista, Internet Explorer 5.0, NET4.5 or above
Features Safety Settings Supports the two-level password: administrator authority, user authority
Dynamic IP address (free) Free bundled Dynamic Domain Name software and device number,need not to register. For example, http://demo.easynp.cn, the model code is "demo"
Center management software (free) Cell phone visit,message alarm visit, plan alarm, multi-screen monitor alarm picture preservation, capture, log query.
Desktop center detection management software (free) Alarm reminder, pan video, plan video,64 photos detection, remote video, remote video replay, auto connection,min available.
Certification Certification ISO CCC FCC CE
Functions and Features
1. A product uses proprietary designed cutter bit system, Achieve smoothly and rapidly straight-line cut on smart PDLC film. It runs in a steady status and no de-lamination.
2. There are two different knife, Straight-line knife and circle knife.
3. All fine tuning can be set up with the control panel on the machine. Including deepness cutting and software smoothening functions.
4. Fast speed reaches 800mm/S.
5. Cutting table uses imported fiber board, Long life span, accuracy cutting, Stable thickness and shape.
6. Straight-line guide rails imported from Italy. Keep a stable operating and high accuracy.
7. Auto computerized control, File can be input to machine directly from Auto cad, Coral draw, PDF format.
Table of Technical Data:
Operating System Win2000, XP, Vistn, Win7
Cutting Speed 800mm/s
Cutting accuracy: 0.2mm
Positioning device Infrared
Cutting thickness:0.2 ~ 0.3 mm
Method of fixing Film Vacuum absorption
Format compatible Grapic software as Auto cad, Coral draw etc.
Control Panel Liquid crystal display
Operating voltage AC220V, 300V 50HZ
Power consumption 4KW
Max cutting size 1200*3000mm
Machine Size 1685*3382*1010mm.
Wooden crate package, 630kgs.
184 Pnc (Znc+Table Movement Auto Positioning) Edm Se Suppliers
Short on time? Let Pnc (Znc+Table Movement Auto Positioning) Edm Se sellers contact you.
