Jf5 series products can be used in the circuit of ac50hz(60hz), rated voltage is 660v or dc440v , to connect round copper conductor which rated cross-section is 0.75-25mm2, performance in accordance with gb/t14048.1-2000"general regulations for low voltage switchgear and controlgear", and jb/t9659.1-1999"terminal block used in low voltage switchgear and controlgear", and also iec60947-7-1:1998 standard. All the type-tests are eligible by china quality supervise and inspection center for electric control and distribution, and achieved model certificate issued by tianjin design & research institute of electric drive, and no. Is f0163.
Pitch: 3.5 to 10.0mm
Position: 2 to 24pins
Voltage rating: 125 to 300V
Current rating: 6 to 20A
Wire range: 0.75 to 1.5m¦
Solid wire (AWG): 14 to 28
Standard wire (AWG): 12 to 26
Torque (Ib-In): 0.4 to 3.5
Screw: M2.5 to M3
Wire strip length: 5 to 8mm
Withstanding voltage: 1.25 to 2KV
Cordis is a well-known medical device company that produces a variety of products, including devices used in interventional cardiology and vascular procedures.
The Cordis Saber PTA balloon is likely designed for use in percutaneous transluminal angioplasty procedures. Angioplasty is a medical procedure used to open narrowed or blocked blood vessels, typically arteries, to improve blood flow. During angioplasty, a balloon catheter is inflated at the site of the blockage to widen the vessel and restore blood flow.
Here are some general features you might expect from a PTA balloon like Cordis Saber:
Balloon Material: The balloon is typically made of materials like polyethylene or polyurethane.
Inflation System: It would likely have an inflation system that allows controlled inflation and deflation of the balloon during the procedure.
Catheter Design: The balloon is mounted on a catheter, which is a flexible tube that allows the device to be threaded through blood vessels to the site of the blockage.
Guidewire Compatibility: PTA balloons are often designed to be used with guide wires for precise placement.
2135 Pcb Mount Pluggable Terminal Blocks Suppliers
Short on time? Let Pcb Mount Pluggable Terminal Blocks sellers contact you.
Terminal box junction box with terminal block din rail copper busbar
Material:
PA: Polyamide 66, UL94 V2 grade, good insulating property, resist dissolve, resist heat, inflaming retarding.
Working temperature: -40C to 110C
PC: Polycarbonate, UL94V0 grade, acid resistant, resist heat, oil proof, inflaming retarding, intolerance UV light.
Working temperature: -35C to 120C
Brass bar, Iron screw plated znic
Voltage: 250-450V
Color: blue color as standard
We are one of the manufacturers which located in China, specialized in terminal blocks and connectors design and produce and advanced management and technology, our products offer superb quality and competitive price over similar items from other manufacturers, technical data.
our advantages:
1.Quality assured with advanced management, experienced engineers and workers
2.Best lead-time: usually 7 to 15 days if the order is no more than 1 million positions
3.Free samples can be offered
4.Trial and mixed lot order acceptable
5. Meets UL, TuV, SGS/RoHS Directive-compliant, CQC requirements
6.Offer OEM/ODM services
I believe that if we can reach a partner,this will be your right choice.
Product Tags:Barrier Terminal Block Terminal Block PCB connector
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier
Barrier Terminal Block Type High Power Automotive Terminal Block Connector/Socket with 8.25mm Pitch and 2 to 30 Poles Images
Terminal Block Distribution Box Din Rail Terminal Block
Description
The terminal block distribution box plays an important role in branching the mian line.Generally it is used for distribution cabinet and various high voltage cabinet.An electric power distribution terminal block is a convenient, economical and safer way to distribute power from a single input source to multiple outputs.It is always used with the din rail,so it is also named din rail terminal block.
Product parameter
Item No. Current(A) Voltage(V) Conductors with starfix temules X-section(mm2) Hole NO.(pcs) Dimension(L*W*H)(mm)
CRUKK-80 85 690 IEC Input 6 to 16 x1 30*69*49
Output 2.5 to 6 x4
Output 2.5 to 16 x2
CRUKK-125 150 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-160 200 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-250 255 690 IEC Input 35 to 120 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-400 335 690 IEC Input 95 to 185 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-500 520 690 IEC Input 3x15.5x0.8 to 8x24 x1 49*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
Material of din rail terminal block
Terminal material: the terminal is made of excellent brass tinned,which is firm and durable,with strong corrosion resistance and good conductivity.
Shell material: the shell is made of Flame retardant nylon material,which is high strength and strong insulation performance.
Screw material: zinc stee,metric thread screw.
Features of Terminal Block Distribution Box
Made of flame-retardant shell, it is high temperature resistant and corrosion resistant.
The installation is simple and safety.The terminal block distribution box is easy and quick to install on the din rail.
The transparent cover can easily see if the cable is conneted reliably.
Cable fixing screw diametersï¼?95% fill ratio: excellent electrical.
Clip-on DIN rail or mount to panel with screws: easy fixing.keeping only one input, the blocks can be connected in parallel using a jumper wire.
DIN rail or panel mount
Wire ready: captive termination screws shipped backed out to save time on conductor installations Â
Catalog Download Here
Hot tage: Terminal block,Terminal box,din rail terminal block
Quick Details
Place of Origin: China
Brand Name:AOSI
Model Number:FS2.5-XX-500-06
Number of Contacts:2p / 2-24p available
Conductor Size:24-14AWG 0.2-2.5m*m
Type:spring, button type
Product name:5.00 pitch wire protect spring clamp terminal block
Pitch:5.00mm
Rated voltage:300V(UL), 400V(IEC)
Rated current:15A(UL), 10A(IEC)
Material:PA66
Withstanding voltage:AC2500V/1 min
Temp. range:-40~+105
Application:pcb
If you have the following product requirements, you can contact me to inquire,thanks.
1. Plug-in series, phoenix socket, pitch 3.5mm, 3.81, 5.0mm, 5.08mm, 7.62mm, etc pluggable terminal block.
2. Double-layer press type screw-free series 5.0mm spring terminal block
3. all kinds of barrier terminal blocks
Testterminal blocks are useful in in-situ testing of electrical energy meters without disrupting load circuit.
Semaphore indicators are used for open / close indication of circuit breakers, on mimic panels
Test terminal block
Test terminal blocks are used for in-situtesting of electrical energy meters viz.Trivector metsrs, mdi and other ct operated meters and protective relays
Technical data
Briefly
The screw-type industrial terminal block has strong static connection stability, high versatility, and can be quickly installed on U-shaped guide rails and G-shaped guide rails. Abundant and practical accessories. Traditional and reliable.
Working current: 17.5 A Operating Voltage 500V
Wiring method: screw connection.
Rated wiring capacity: 1.5 mm2
Installation method: NS 35/7,5ï¼?NS 35/15ï¼?NS32ã??
Advantage
Universal mounting foot, available for rails NS35 and NS32.
Static connection stability is strong.
Potential distribution with bridges.
item no.:12P2536X062
lead time:2-3 working days
product orgin:USA
brand:Emerson
shipping port:xiamen
payment:T/T and Western Union
price:$121/1200
market price:$900
price range:1-78/908$
color:metal color
Terminal Block Distribution Box Din Rail Terminal Block
Description
The terminal block distribution box plays an important role in branching the mian line.Generally it is used for distribution cabinet and various high voltage cabinet.An electric power distribution terminal block is a convenient, economical and safer way to distribute power from a single input source to multiple outputs.It is always used with the din rail,so it is also named din rail terminal block.
Product parameter
Item No. Current(A) Voltage(V) Conductors with starfix temules X-section(mm2) Hole NO.(pcs) Dimension(L*W*H)(mm)
CRUKK-80 85 690 IEC Input 6 to 16 x1 30*69*49
Output 2.5 to 6 x4
Output 2.5 to 16 x2
CRUKK-125 150 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-160 200 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-250 255 690 IEC Input 35 to 120 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-400 335 690 IEC Input 95 to 185 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-500 520 690 IEC Input 3x15.5x0.8 to 8x24 x1 49*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
Material of din rail terminal block
Terminal material: the terminal is made of excellent brass tinned,which is firm and durable,with strong corrosion resistance and good conductivity.
Shell material: the shell is made of Flame retardant nylon material,which is high strength and strong insulation performance.
Screw material: zinc stee,metric thread screw.
Features of Terminal Block Distribution Box
Made of flame-retardant shell, it is high temperature resistant and corrosion resistant.
The installation is simple and safety.The terminal block distribution box is easy and quick to install on the din rail.
The transparent cover can easily see if the cable is conneted reliably.
Cable fixing screw diametersï¼?95% fill ratio: excellent electrical.
Clip-on DIN rail or mount to panel with screws: easy fixing.keeping only one input, the blocks can be connected in parallel using a jumper wire.
DIN rail or panel mount
Wire ready: captive termination screws shipped backed out to save time on conductor installations
Hot tage: Terminal block,Terminal box,din rail terminal block
Contact information:
CROP China
2135 Pcb Mount Pluggable Terminal Blocks Suppliers
Short on time? Let Pcb Mount Pluggable Terminal Blocks sellers contact you.
