Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Material: full carbon fiber
Weave: UD
Include: Frame, fork
Headset size: top 1-1/8 down 1-1/2
Seatpost: 27.2mm
Size: 49/52/54/56/58
BB: BSA/PF30/BB86
Brake Type: Flat Mount Disc Brake ( Front 140mm, can be transfer to 160mm, Rear 140mm)
Max tire: 700*42C and 27.5*2.2"
Fork spacer:100*12
Rear spacer:142*12
Weight: 1180g±40g
Fork: 470g
Cables routing: All internal
Test: CEN SGS
Warranty: 2 years
Our company: We are the professional manufacturer of carbon bicycle and bicycle accessories in China for more than 10 years. Our main products are: carbon bike frame, fork, wheelset, handlebar, stem, seatpost, saddle ect. We offer 2 years' quality warranty for all of our carbon frames, and 1 year quality warranty for all of our carbon rim, wheel and other carbon components. WCB-M-145(29ER) Material: full carbon fiber Weave: UD Include Frame Headset size:top 1-1/8 down 1-1/2 Seatpost:31.6mm BB:BB92 Size:15.5/17.5/19/21 Rear shock size:190*51mm Brake Type: Disc Brake (rear 160mm /180mm rotor) Single Crankset Max teeth 34T . Front travel:100mm Rear travel:100mm Rear Hanger:142*12mm or 148*12mm Max Tire:29*2.3" Cables routing: All internal Test: CEN SGS Warranty: 2 years
Our company:
We are the professional manufacturer of carbon bicycle and bicycle accessories in China for more than 10 years.
Our main products are: carbon bike frame, fork, wheelset, handlebar, stem, seatpost, saddle ect.
We offer 2 years' quality warranty for all of our carbon frames, and 1 year quality warranty for all of our carbon rim, wheel and other carbon components.
WCB-M-145(29ER)
Material: full carbon fiber
Weave: UD
Includeï¼?Frame
Headset size:top 1-1/8 down 1-1/2
Seatpost:31.6mm
BB:BB92
Size:15.5/17.5/19/21
Rear shock size:190*51mm
Brake Type: Disc Brake (rear 160mm /180mm rotor)
Single Crankset Max teeth 34T .
Front travel:100mm
Rear travel:100mm
Rear Hanger:142*12mm or 148*12mm
Max Tire:29*2.3"
Cables routing: All internal
Test: CEN SGS
Warranty: 2 years
Our company: We are the professional manufacturer of carbon bicycle and bicycle accessories in China for more than 10 years. Our main products are: carbon bike frame, fork, wheelset, handlebar, stem, seatpost, saddle ect. We offer 2 years' quality warranty for all of our carbon frames, and 1 year quality warranty for all of our carbon rim, wheel and other carbon components. WCB-M-145(29ER) Material: full carbon fiber Weave: UD Include Frame Headset size:top 1-1/8 down 1-1/2 Seatpost:31.6mm BB:BB92 Size:15.5/17.5/19/21 Rear shock size:190*51mm Brake Type: Disc Brake (rear 160mm /180mm rotor) Single Crankset Max teeth 34T . Front travel:100mm Rear travel:100mm Rear Hanger:142*12mm or 148*12mm Max Tire:29*2.3" Cables routing: All internal Test: CEN SGS Warranty: 2 years
Our company:
We are the professional manufacturer of carbon bicycle and bicycle accessories in China for more than 10 years.
Our main products are: carbon bike frame, fork, wheelset, handlebar, stem, seatpost, saddle ect.
We offer 2 years' quality warranty for all of our carbon frames, and 1 year quality warranty for all of our carbon rim, wheel and other carbon components.
WCB-M-145(29ER)
Material: full carbon fiber
Weave: UD
Includeï¼?Frame
Headset size:top 1-1/8 down 1-1/2
Seatpost:31.6mm
BB:BB92
Size:15.5/17.5/19/21
Rear shock size:190*51mm
Brake Type: Disc Brake (rear 160mm /180mm rotor)
Single Crankset Max teeth 34T .
Front travel:100mm
Rear travel:100mm
Rear Hanger:142*12mm or 148*12mm
Max Tire:29*2.3"
Cables routing: All internal
Test: CEN SGS
Warranty: 2 years
The heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouseis powered by cabled drum. The power source 380V alternatingcurrent is supplied to the traction motor by cable. Cable is collected and released by coiling device mounted underneath the car. The heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouse can realize full automatic operation by PLC system. The heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouse can be applied in the environment such as severe environment,high temperature, antiexplosive etc. Simple structure and low cost make it popular for workshop transportation. The heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouse can be applied in the occasion with any loading capacity and high using frequency. If the running distance is beyond 50m, the heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouse needs to install cable arranger to help with cable rolling. The max running distance of the heavy duty Industry machine with carbon steel frame for coil material handling electric transfer rail car in warehouse is up to 200-400m.
