Industrial design, stable and reliable, suitable for harsh environment;
Support 4, 8 and 16 digital DO outputs, widely used;
DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz;
DO2 can be used to control the direction output of stepper motor and servo motor;
1 RS485 supports Modbus master and slave protocol for expanding IO or HMI;
One RJ45 Ethernet interface supports TCP Server and TCP Client services;
Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms;
As a TCP server, it can support 5 TCP links at the same time.
1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design;
2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable;
3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
4. 3G/4G/NB-IoT Modules are optional;
5. Modular design, can easily upgrade the cellular module if network upgrade;
6.Support 1 channel relay output for restart the devices;
7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation;
8.Up to 10 user's phone number to receive alarm and daily report SMS/Call;
9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously;
10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol;
11.Inbuilt large capacity automatically rechargeable backup battery;
12. Industrial class design suitable for long time work applications;
13. Support configure parameters, load profiles and upgrade the firmware via PC;
14. Wall mount or 35mm standard DIN rail Design, convenient installation,
15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;
5. Management and configuration via LAN connection configuration software for easy operation and maintenance;
6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly.
Advantages
Quad band 850/900/1800/1900Mhz GSM GPRS Module inside;
3G UMTS/HSDPA/4G Modules are optional.;
32 bit MCU, reliable performance with in-built watchdog;
Support temperature & humidity monitoring remotely in real-time;
Support 8 channel temperature input interface(DS18B20 Temperature sensors);
Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC;
High/Low Alert via SMS/Call/GPRS;
Supports 1 DNS or IP address as server;
Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network;
Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
Supports remotely restart the device, and configure it by SMS commands remotely;
Up to 10 user's phone number to receive alarm and daily report SMS/Call;
Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers;
In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation;
In-built internal clock, support 11 actions on schedule at pre-set time;
Internal 16MB memory, logs more than 200000 records;
Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm;
Support Android/IOS APP, easily & friendly for use/config.
Support remote upgrade the firmware via PC.
Can be operated from anywhere, no distance limitation;
Secure - Using caller ID and password for identification, unknown callers are ignored;
119 M2M Modem Plus Rs485 Io A Suppliers
Short on time? Let M2M Modem Plus Rs485 Io A sellers contact you.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;
5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
6. High sampling frequency and special filtering strategy to ensure reliability;
7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;
8. Supports register mapping function and extend I/O inquiry strategy;
9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The LF500P electronic cash register brings the shopkeeper the impressive performance. It is easy to program, simple to use, and would take the sales easy for the operator. You can always trust it with its smart and accurate calculation, various reports, e-journal, gross profit analysis, etc. Additionally, the functions may be customized according to your needs. Most of all, it is low cost and would grow with your business together.
Main features:
64 keys raised and dustproof programmable keyboard
50 Department and 7,000 PLU for fast print speed and quiet operation
250 Tables of table billing for restaurant functions
192*64 LCD display for operator
LED back display(8 digits) for customer
RS232/RS485 communication ports for barcode scanner back office PC.
Printing of user defined logos, coupons or advertising messages available.
Supports peripherals such as barcode scanner, electronic weighing scale, kitchen printer and modem.
F3x23 serial industrial router is a kind of cellular terminal device that provides data transfer function by public network.
It adopts high-powered industrial 32-bits cpu and embedded real time operating system. It supports rs232 (or rs485/rs422) and ethernet port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ethernet devices with only basic configuration.
It has been widely used on m2m fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, pos, water supply, environment protection, post, weather, and so on.
Standard four-faith carton or neutral carton package
LS-T2 we offer serial port, USB port, NET port three versions;
Range: single color 1536*64 , dual color 768*64 , 32K pixels
Scan mode: 1/16,1/8,1/4,1/2, static routing
Scan interface: 2*IO (HUB08), 4*IO (HUB12)
Communication mode : RS232, RS485, USB,100M NET Port
Wireless communication: Support GSM, GPRS, RF;
Memory: 2M Bytes
Extended interface Temperature sensor, test button, switch
Player: LED Player 3.2.
The debug tool is used to read the data of Changruns full range of fuel sensors and accessories, set its function parameters and perform fault diagnosis. It can completely replace the work of the computer, and has the advantages of convenient carrying and simple operation.
The debug tool can first be used to calibrate the fuel tank. It can simultaneously read the instantaneous percentage of the oil volume, the instantaneous digital value, the filtering percentage, and the filtered digital value. The liquid level status of the current device is displayed. The debug tool supports both RS232/RS485 digital signals and can set the RS232/RS485 signal listening mode (receive data only).
Other functions of this product include: setting RS232/RS485 digital communication fuel volume sensor, CR606TS signal conversion module, CR606TC modem damping value, equipment ID, timing report, resistance table (CR606TC specific), debugging original car fuel meter, reading the internal parameters of the sensor and accessories.
Performance
Working voltage: built-in lithium battery 1000mAh 3.7V
The debug tool is used to read the data of Changruns full range of fuel sensors and accessories, set its function parameters and perform fault diagnosis. It can completely replace the work of the computer, and has the advantages of convenient carrying and simple operation.
The debug tool can first be used to calibrate the fuel tank. It can simultaneously read the instantaneous percentage of the oil volume, the instantaneous digital value, the filtering percentage, and the filtered digital value. The liquid level status of the current device is displayed. The debug tool supports both RS232/RS485 digital signals and can set the RS232/RS485 signal listening mode (receive data only).
Other functions of this product include: setting RS232/RS485 digital communication fuel volume sensor, CR606TS signal conversion module, CR606TC modem damping value, equipment ID, timing report, resistance table (CR606TC specific), debugging original car fuel meter, reading the internal parameters of the sensor and accessories.
Performance
Working voltage: built-in lithium battery 1000mAh 3.7V
DAKSH CCTV INDIA PVT LTD - 8 CHANNEL VIDEO & 1 CHANNEL AUDIO 1080P REAL TIME PREVIEW AND PLAYBACK SUPPORTS IP, UHD & ANALOG CAMERAS / RS485
1* 4 TB, MOBILE MONITORING: SUPER LIVE PLUS
DAKSH CCTV INDIA PVT LTD - DVR- 16 CHANNEL & 1 CHANNEL AUDIO 1080P REAL TIME PREVIEW AND PLAYBACK SUPPORTS IP , UHD & ANALOG CAMERAS / RS485 1 * 4 TB , MOBILE MONITORING: SUPER LIVE PLUS.
DAKSH CCTV INDIA PVT LTD - TSCL 32 CHANNEL DVR & 1 CHANNEL AUDIO 1080P REAL TIME PREVIEW AND PLAYBACK SUPPORTS IP , UHD & ANALOG CAMERAS /RS485 1*4 TB , MOBILE MONITORING : SUPER LIVE PLUS
Datasheet:http://www.e-lins.com/EN/download/H900-Datasheet-Eng.pdf
More details contact: sales9(at) elins. com
E-Lins H900 Series Router is the Dual Core CPU Gigabit and powerful high performance of Dual SIM 4G / 3G router designed for critical infrastructure, M2M, IoT and industrial applications;
Dual Core CPU 880MHz Frequence;
WAN RJ45 * 1 + LAN RJ45 * 4 + DIO + Serial + USB;
802.11n and 802.11AC 2.4GHz + 5GHz Dual band or Tri band WiFi;
Industrial, rubust, secure and high reliable built-in 4g modem with 2 sim card slots, fail over and load balance;
High data speed via 4G 3G 2G networks MIMO;
Secure data transactions with advanced VPN options;
Advanced dynamic routing, security and firewall features;
Video Compression H.264
Audio Compression MP3
Video Input/Output 1CH D1
Audio Input/Output 1CH
Alarm Output 1CH
Motion Detection Yes
Web Server Internal
Dynamic IP Address Support 2 level of Domain Name,easily realize ADSL dail.
Signal System PAL/NTSC
Code Flow 64 bps~8M bps
Picture Snap Yes
Local Record Yes
Dynamic Test Area and Sensitivity is adjustable
Alarm Backup FTP
Alarm Pre-record 5'~30'
Prolong Alarm Record 30~120 seconds
Ethernet 10/100M
IO Port Support
PTZ Port RS485,Remote PTZ
USB 2.0 Yes
MAX Clients 10 at the same time
Model:S273
Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;
4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert;
11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC;
12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
13. Supports remotely restart the RTU, and configure it by SMS commands remotely;
14. Supports over voltage protection and phase-reversal protection;
15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Remote Monitoring your assets in anywhere and anytime!
An Innovative GPRS RTU to reduce your management costs!
GSM GPRS RTU Telemetry Data Logger
GSM GPRS RTU Telemetry Data Logger M2M
GPRS Terminal with RS485
GPRS Telemetry with SCADA
GPRS Data Logger with Modbus RTU protocol
GPRS Controller with Modbus RTU protocol
GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
The features and functions of GSM GPRS RTU Telemetry Data Logger S240:
1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside;
2) Direct connection to the GSM GPRS Network;
3) Transparent Serial Data Tunneling using low cost SMS/GPRS network;
4) Remote Configuration by SMS Messages or GPRS;
5) Upload data via GPRS or SMS on Schedule or event occurs;
6) Supports Dynamic Domain name or Static IP address;
7) Supports SMS, GPRS UDP and TCP protocols;
8) Supports Modbus RTU protocols;
9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port;
10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;
11) 6 digital inputs can be used as Pulse Counters;
12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;
13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA);
14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55¡ãC to +125¡ãC. Fahrenheit equivalent is -67¡ãF to +257¡ãF, ¡À0.5¡ãC accuracy from -10¡ãC to +85¡ãC, Thermometer resolution is programmable from 9 to 12 bits;
15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA;
16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name;
17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;
18) More Protocols can be updated by user through USB Port with the updated firmware;
19) Power supply 9V to 24V(Recommend 12VDC);
20) Size: 168mm*113mm*32.3mm.
Standard packing list of GSM GPRS RTU Telemetry Data Logger S240:
1X Mainframe
1X AC/DC adaptor
1X User Manual(CD)
1X GSM ANT
PC Configurator is free charge in the CD
With internal back up battery.
119 M2M Modem Plus Rs485 Io A Suppliers
Short on time? Let M2M Modem Plus Rs485 Io A sellers contact you.
