matrix alignment Face ID axis extension flex cable for X-13 Pro Max. Wylie dot matrix extension cable for Face ID function detection repair.
Features:
1. WYLIE Dot Matrix Lattice Alignment Flex Cable for Face Lattice Maintenance Repair.
2. After the Lattice repair is completed, there is no need to apply Glue.
3. The extend cable can cooperate with the fixture to test the glue in advance.
4. Paste the glue to achieve 99% perfect alignment of the Lattice.
5. Dot matrix alignment extension cable suitable for X/XS/XS MAX/XR/11/11PRO/11 PRO MAX/12/12 PRO/12 PRO MAX/13/13 MINI/13 PRO/13 PRO MAX.
Electrical Characteristics
- Rated Voltage : 0.6/1 kV AC
- Rated DC Voltage : 1.5 kV
- Maximum Permitted DC Voltage : 1.8 kV (conductor/conductor,
non earthen system, circuit not under load)
- Maximum Permitted AC Voltage : 1 KV
- Working Voltage : DC 1000 V
- Spark Test : 6000 V. ac (8400 Vdc)
- Voltage Withstand : 6500 V as per EN50395 for 5 min
- Ampacity : According to requirements for cables for PV systems
Technical Data
- Ambient Temperature : -40C +90C
- Minimum Bending Radius : 5 x OD (fixed), 15 x OD
(occasional flexing)
- Flame retardant according to IEC 60332-1-2
- Low smoke emission < 20% as per ASTM D-2843
- Halogen free according to EN 50267-2-1/-2, IEC 60754-2
- Maximum Temperature at Conductor : 120C (20000h)
- Short Circuit Temperature : 200�?�°C (at conductor max. 5sec)
- Thermal Endurance Test : According to EN 60216-2
(temperature index +120C)
- High Temperature Pressure : Test according to EN 60811-3-1
- Excellent mechanical and electrical properties.
- UV resistance & OZONE resistance
- Flexibility & suitability for fast & easy installation
Cable Standard
EN 50618
Standard Packing
Coils 100, 200,300, 500, 1000m
Conductor
Flexible Electrolytic fine Tinned
copper class-5 conductor according
to IEC 60228
QIANLI MEGA-IDEA Clone DZ03 Face ID Dot Matrix Programmer No dismantling repair instrument for iPhone X to 14 Pro Max face ID repair.
Features:
Clone-DZ03 programmer, repair face ID as easily as repair accessories, even a piece of cake for new beginners.
Simple, as long as you know how to disassemble your phone.
No difficulty, beginners can also repair FACE ID.
Easy, repair the Id FACE as easily as changing accessories.
Support a variety of flex cables with unlimited expansion.
Support iPhone X/11/12 series flex cables, and other models will keep updating.
Package includes:
1 x DZ03 Standard set: Host+Dot Matrix Module+battery Test Module
1 x Clone-DZ03 Host:Host+Dot Matrix Module
1 x Dot Matrix Flex Cable(Optional)
Programmer QIANLI MEGA-IDEA Clone DZ03 Dot Matrix Repair Instrument
Note: The flat cable supports IP X series, 11 series, 12 series, and other models are continuously updated. The flat cable is generally MEGA-IDEA, QIANLI device, QIANLI device (iCopy, Apollo, iD Face, etc.)
Usage:
1. Download MEGA-IDEA computer software.
2. Plug the MEGA-IDEA Clone-DZ03 programming host into the dot-matrix activation board, connect the computer software "Megalda Assistant", and connect the matching power adapter to the DC interface on the activation board.
3. Connect the mobile phone to the computer, button the dot matrix module on the activation board and click to activate (at the same time, the dot matrix data will be backed up through the unique code of the mobile phone).
4. Remove the dot matrix module, buckle the corresponding type of flat cable, and write it into the bottom layer of flat cable data.
5. The flat cable is connected with the dot matrix module, and then connected to the programmer for testing. The data display is normal, and the face is successfully repaired after being loaded into the mobile phone.
JCID battery board repair flex cable for iPhone 11-14 Pro Max/SE3 Battery data health warning removing. JC battery repair flex cable for removing non-genuine battery warning on iPhone 11 to iPhone 14 Pro Max and iPhone SE3, fixes iPhone battery health menu warning â??unauthorizedâ?? battery replacements. JC battery flex cable to erase the Non-Genuine Battery Warning pop up on iPhone.
Option:
1. JC iPhone 11 external battery repair flex cable.
2. JC iPhone 11 Pro/11 Pro Max battery repair flex cable.
3. JC iPhone 12/12 MINI/12 Pro external battery repair flex cable.
4. JC iPhone 12 Pro Max external battery repair flex cable.
5. JC iPhone 13/13 mini external battery repair flex cable.
6. JC iPhone 13 Pro/13 Pro Max external battery repair flex cable.
7. JC iPhone 14/14 plus external battery repair flex cable.
8. JC iPhone 14 Pro/14 Pro Max external battery repair flex cable.
9. JC iPhone SE3 external battery repair flex cable.
Features:
- Erase the Non-Genuine Battery Warning on iPhone.
- iPhone battery Warning Pop Ups.
- battery Warning pop up.
- iPhone battery replacement.
- iPhone Battery & Power Repair.
- iPhone power issues.
- replace your old, depleted iPhone battery.
- Support for iPhone 11/11 Pro/ 11 Pro Max /12/ 12 mini/12 Pro/12 Pro Max/13/13 mini/13 Pro/13 Pro Max/14/14 Plus/14 Pro/14 Pro Max/SE3 for battery data edit.
- It can solve the maintenance problems such as the charging times, battery lifespan, battery code, warning message pop-up.
- Interlligent and stable : this solution is to connect a third-party flex cable on the original battery board, and modify the data through V1S PRO or V1SE.
- The core of the solution is to rely on the original battery board, so it does not affect the charging and discharging characteristics of the battery.
Relate Accessories:
Extenal Battery Flex Cable (Convenient to use, no require for Professional Skill).
i2C Battery Data Test Guide Cable Battery Start Extension Cord Compatible Phone Battery Repair. I2C battery test lead flex cable for i2c I6S programmer.
Function introduction:
No-removal battery extension test + guide in one step
1. Blue/green light on - Can detect and modify battery data
2. Yellow/Red light on - Bootable mobile phone popup
Features:
Dual-function switching use, test and guide are all done
Replacing the battery guide shows the real battery data
Change battery automatic boot/test dual function
Dual LED light reminder, green /blue test, red light/yellow light guide
FPC flexible material can be bent and folded for use
No-removal battery extension test to modify data, guide the mobile phone pop-up window
Support 5SE-13Pro Max models
Operation method:
Snap one end of the battery guide cable to the corresponding socket of the battery.
The other end is buckled on the detection and reading device.
Move the toggle switch to the "test function" end, and the blue or green light turns on to detect and modify battery data.
1049 I2C V8I Programmer With Dot Matrix Flex Cable Suppliers
Short on time? Let I2C V8I Programmer With Dot Matrix Flex Cable sellers contact you.
We (PP-rest Oy) will offer a complete portfolio of DKE's E-paper displays, from 0.97 to 13.3, with various color and temperature range options. Flexible models are also available. Other DKE's products (Dot- matrix and Segmented Displays) can be also inquired via us!
Luban iFace Pro Dot Matrix IC Flex Cable X XR XS MAX 11-13 Pro Max Repair Face ID Fixture Dot Projector LB Programmer
LB Newest Programmer Features:
LLuBan Intelligent Repair Instrument L3 mini + Supports for X/XS/XS MAX/XR/11/11 Pro/11 Pro Max/ 12/12 Mini/12 Pro/12 Pro Max/ 13/13 Mini/13 Pro/13Pro Max
Face Dot and Receiver FPC Cable Repair For data read and write
LUBAN New Programmer Dot Matrix Read Write Repair Tool.
Luban spot programmer can backup out of the face data and save, prevent the loss of mobile phone repair data can not be repaired twice. Third, Luban wiring and chip program compatible with ios system, ios system update will not affect the use. Four, Luban products factory through strict testing, to ensure the stability of quality.
36.00mm (1.4¡±) 4.0x4.0 square dot matrix led display.
Features
Row:5, col:9
Square dot
1.2 inch matrix height
Dt size 3.00mm
Low current operation
High contrast and light output
Compatible with ascii and ebcdic codes
Stackable horizontally
Column cathode and column anode available
Easy mounting on pc. Boards or sockets
Multicolor available
Categorized for luminous intensity
Mechanically rugged
Standard: gray face , white dot
Rohs compliance.
Qianli Battery Flex Cable For iPhone 11-13 Pro Max battery non-genuine battery warning removal. Qianli Copy Power battery data corrector flex cable for reset iPhone battery health data, remove battery pop up error. Qianli battery flex cable with Copy Power battery programmer for modifying iPhone battery data, restore iPhone battery health information, remove iPhone battery important message, ect.
Note: ONLY ORIGINAL BATTERY FLEX CAN BE USE ON THIS MACHINE.
Features:
1: No pop-ups,no jump Repairing,efficiency correction.
2: Replace the battery core and reset the cycle.
3: Available to correct Detail Status on Software of PC Side.
4: Low power IC Chip, non effect for standby.
5: Aisi flashing assistant or data in green (note: please do not connect to the Aisi flashing tool Before success , otherwise you cannot data in green).
6: Suitable for iPhone 11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 mini/13/13mini/13 Pro/13 Pro Max.
Relate Accessories: Extenal Battery Flex Cable(Convenient to use, no require for Professional Skill)
If you replace the battery of iPhone XS or above, whether it is a genuine battery or a third-party repair battery, you will see the message "Unable to verify this iPhone has a genuine Apple battery" and "Health information not available for this battery" on the iPhone ( As shown in the figure below), it means that the battery in the device cannot be verified as a genuine product, and the maximum capacity will not display the percentage.
Multi-functional JC V1SE Programmer With Battery Board and Battery board flex cable for iPhone battery replacement repair. JC battery repair tool for removing important messages from the iPhone. JC battery repair flex cable for iPhone 11-13 Pro Max battery health data modification, remove non-genuine battery error after iPhone battery replacement.
Features:
1. Support iPhone 11/11 Pro/ 11 Pro Max /12/ 12 Pro/12 Pro Max/13/13 mini/13 Pro/13 Pro Max battery.
2. It can solve the maintenance problems such as the charging times, battery lifespan, battery code, warning message pop-up.
3. Interlligent and stable: this solution is to connect a third-party flex cable on the original battery board, and modify the data through PRO1000S or V1SE.
4. The core of the solution is to rely on the original battery board, so it does not affect the charging and discharging characteristics of the battery.
Relate Accessories:
Extenal Battery Flex Cable(Convenient to use, no require for Professional Skill)
Built-in Battery Flex Cable(Requires professional Skill,no trace sign after repairing)
If you replace the battery of iPhone XS or above, whether it is a genuine battery or a third-party repair battery, you will see the message "Unable to verify this iPhone has a genuine Apple battery" and "Health information not available for this battery" on the iPhone ( As shown in the figure below), it means that the battery in the device cannot be verified as a genuine product, and the maximum capacity will not display the percentage.
Phone Battery extension flex cable For Phone repair.
Features :
New.
100% tested with high quality.
Special used for Phone
Replacing your broken, unusable or damaged Phone Battery extension Flex Cable.
Note : Please make sure you know how to install and replace this item. The installation of this part requires professional disassembly and assembly of mobile phone technology and knowledge.
dot matrix alignment Face ID axis extension flex cable for Phone X-13 Pro Max. Wylie dot matrix extension cable for Phone Face ID function detection repair.
Features:
1. WYLIE Dot Matrix Lattice Alignment Flex Cable for Face Lattice Maintenance Repair.
2. After the Lattice repair is completed, there is no need to apply Glue.
3. The extend cable can cooperate with the fixture to test the glue in advance.
4. Paste the glue to achieve 99% perfect alignment of the Lattice.
5. Dot matrix alignment extension cable suitable for Phone
JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
Option:
1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only).
2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max.
Functions:
1. The receiver FPC controls True Tone and also acts in the Face ID process.
2. The receiver is often broken by a screen change and until now has not been replaceable.
3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available.
(If your Face-ID error is move a little higher this is a different fault and different repair procedure).
Feature:
1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC.
2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC.
3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex.
4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
A sleek wired matrix mouse will bring a touch of flair to your office. The USB cable is 120 cm long and robust, allowing you to commute comfortably. Optical sensors that are both efficient and precise. Works on all surfaces and more efficiently on wooden surfaces. From the date of purchase, the product has a one-year warranty. It's simple to use at work and home.
Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber,
It builds favourable properties which make it high performance polymer, compressible and heat resistance.
TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength
Properties
High temperature resistance
Wide range of hardnesses
Resistance to chemicals and weathering
Low compression set
Flex fatigue resistance
Lightweight
Good colourability
Typical Applications
Interior and Exterior Automotive parts
Wire & Cable Jacketing compound
Gaskets
Grommet, sockets
Building and construction materials
Sporting goods
Electrical and electronics good
Specification
Hardness
Set(ISO 868) (Shore A-D) 40 A - 55 D
Density
(g/cm3) 0.93 - 1.1
Compression(Set) Excellent
Tensile Set (ISO 527) 3 MPa 10 MPa
Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3
Elongation Set (ISO 527) (%) 500 1000
Working Temp. Max. (C) 140
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Good
Motor Oil Resistance Excellent
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Polyethylene Waxes. Polyethylene Wax, also known as PE Wax, is an ultra-low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a by-product of polyethylene production.
Vinayak Associates offers a comprehensive range of Polyethylene Wax which has a large variety of uses & Applications. Polyethylene Wax, also known as PE Wax, is an ultra-low molecular weight polyethylene consisting of ethylene monomer chains. Due to its high crystalline nature, this material has unique features such as hardness at high temperature and low solubility in a wide range of solvents.
Characteristics of PE Wax are-
High Softening Point
High Melting Point
Excellent Thermal Stability
High Chemical Resistance
High Compatible with a wax variety
Perfect lubrication
Perfect head resistance
Uses and Application of PE Wax-
The major function of PE Wax in many formulations is to either provide lubrication 7/or provide physical modification of a formula by changing viscosity & melting point.
It increases inorganic and organic pigment dispersion in matrix polymer during masterbatch processing. PE Wax also helps granule produce by decreasing softening point of the system.
PE Wax is mainly used in additives, candles, cosmetics, rubber processing, packaging, lubricants, wood coatings, textile treatment, cable filing, polish, masterbatch, paint, crayon, etc.
In the coating Industry, PE Wax is used to provide water repellency, better slip, mark resistance, anti-sagging, abrasion resistance among other
In Ink Industry, PE Wax is used to improve the coefficient of friction and increase scuff resistance.
Sprt pos76ii series (compatible with epson)
Printing method: 9 pin serial impact dot matrix
Printing speed: 76mm paper: 4.4 lps/ 57mm paper: 5.6lps
Resolution: 42cpl-210(whole dot)/420(half dot)
Effective printing width: 66mm
Character set: ibm character set ii, gb2312-80(chinese)
Print font: ank: 7*7 / 5*7 chinese: 15*16
Character per line: 42 or 35
Paper type: plain paper
Paper dimension: 76mm*80mm
Paper thickness: 0.05~0.08mm
Paper supply method: cramp/total eject
Reliability
Mcbf: 9 million lines
Auto cutter: 300, 000 cuts
Tph: 9 million lines
Barcodes: n/a
Emulation: esc/pos
Driver: windows98/2000/nt/xp
Sensor: paper near end sensor/ paper end sensor optional
Drawer port: 1 port
Interface: rs-232, parallel
Power supply: ac100 ~240v f+ 10 %(include) dc 24v, 2a
Auto cutter
Type:
Life: 300, 000 cuts
Cutting method: full / partial cut
Weight: with cutter: 1.9kg, without cutter:1.66kg
Dimension: 160 x 248 x 142 mm
Color: beige/dark gray
Features:
Selectable auto cutter
Selectable copy capability
Support black mark printing
Easy to use and simple to maintain
Auto paper loading for paper replacement
Printing speed: 2.5lines/s 1.5lines/s
Resolution: 8 dots/mm, 384 dots/line
Effective printing width: 48mm
Character set: ibm character set II, gb2312-80(chinese)
Print font: ank: 5*7, chinese: 24*24, 16*16, 12*12
Character per line: 24/40
Paper type: plain paper
Paper dimension: 58mm*50mm
Paper supply method: auto paper loading
Reliability
Mcbf: 0.5 million lines
Interface: rs-232, parallel
Power supply: dc5v, 3a
Weight: 310g
Dimension: 122*129*72mm
Installation port size: 112*112mm
Color: beige
Features:
Compact panel size
Convenient for handling
Different interfaces optional
Easily embedded to any kinds of instruments and meters
Printing method: dot matrix
Printing speed: 1.0lines/s 0.7lines/s 0.4lines/s
Resolution: 8 dots/mm, 384 dots/line
Effective printing width: 32/48mm
Character set: ibm character set ii, gb2312-80(chinese)
Print font: ank: 5*7, chinese: 24*24, 16*16, 12*12
Character per line: 16/24/40
Paper type: plain paper
Paper dimension: 44mm*40mm & 58mm*40mm
Paper supply method: auto paper loading
Reliability
Mcbf: 0.5 million lines
Interface: rs-232, parallel
Power supply: dc5v, 3a
Weight: 200g
Dimension: 105*61*69mm
Installation port size: 103*57mm
Color: beige
Features:
Compact panel size
Convenient for handling
Different interfaces optional
Easily embedded to any kinds of instruments and meters
1049 I2C V8I Programmer With Dot Matrix Flex Cable Suppliers
Short on time? Let I2C V8I Programmer With Dot Matrix Flex Cable sellers contact you.
