Advantage
1,Big airflow,low noise, aerofoil shaped axial fan using ABS material.
2,Corrosion resistant cabinet, UV resistant, anti-deformation, stabilized, high strength structural polymer PP.
3,Moisture and tropic proof, invertor motor, operates evenly and saves energy.
4,High efficiency cooling pads (5090)with great evaporation and easily maintain.
5,Intelligent control system provides water alarm protection, automatic circuit breaker and self-cleaning, Sweden import thermostat, adjust temperature and humidity sensitively.
6,Controlled open water distribution system, which enables water flow smoothly.
Characteristics
1, High efficiency cellulose pad, Up to 90% evaporation efficiency.
2, High quality plastic cabinet; UV-resist cabinet material, Temperature tolerance from -20 OC to 86 OC.
3, High-quality aluminum sealed motor, good heat dissipation. Water proof and outstanding dissipation performance and long lifetime.
4, open-water distribution, enabling smooth flow uniformity
5, High quality drain valve, 50000 times super long lifetime
6, Luxury LCD wall controller, Thermostatic, big display, nice white back light, real clock auto on/off, temperature and humidity display, auto swing diffuser control .
More details :
1.Superior and Strong Body Design
The ESC A Series is clean, simple and modern.
Injection moulded from specially developed Permatuf polymer, is UV resistant and will stand up to the harshest extremes of climate, year after year.
2.Control System (LCD Touch screen +Remote)
The ESC A SeriesLCD Touch screen +Remote controller plus climate control at your fingertips. It's so easy to use. You set the comfort level you want on the controller.
You can choose from four different control modes to control your home the way you want.
3.FEATURES
a.Long leg pump
ESC 'S long leg water pump provides exceptional reliability in the most extreme conditions and long leg design can avoid short circuit.
b.Stealth fan
Stealth fan design with 3 blades is super quiet in operation and ensures a constant, even flow of air through Cooling pads. The advanced aerodynamic design uses only a small amount of energy to produce a constant, welcoming ESC .
c.Cooling Pad
Made from a special cellulose material, maximum cooling efficiency 5090 , The pads are essentially self-cleaning - dust and pollen is captured on the pads and then washed away into the sump below by the flow of water.
d.Free-flow water distributor
A world patented water distribution system delivers continuous, even water coverage to the cooling pads, ensuing maximum cooling effect.
e.Automatic drain valve
ESC cooler system doesn't requre costly and time consuming seasonal maintenance at the beginning and end of each season because your unit is fitted with an automatic drain valve. This specially programmed valve keeps your cooling system clean and operating at maximum efficiency, while using the mimimum amount of water. During warmer weather dust and airborne impurities may get into your system. That's when necessary, replaving it with clean, fresh water.When your system is not in use, the valve automatically empties the reservoir, leaving it clean and dry.
f.Automatic Inlet valve
Inlet Valve is Inlet & Valve. Therefore Inlet Valve is that valve through which water whose pressure in increased by reducing its volume in intaked into the cylinder.
h.Smart Management
An electronic smart-control system manages your Coolair¡¯s whole of home system. Fan speeds, water cycling, climate control, operating programs¡ it¡¯s all taken care of with reliable precision. All you have to do is set and forget, then just enjoy the superb comfort of a Coolair cooled where you want cooled the place .
Specification
HZ12-18X-A1
Fan Capacity (m3/h) 18000
Full Pressure (Pa) 200
Voltage/Frequency (V/Hz) 220/50
Fan Type :Axail
Fan Speeds 1-phase,varialbe speeds
Noise (dB) ¡Ü68
Water Consumption (L/h) 15-25
Water Capacity (L) 40
Application Area (m2) 100-150
Drive Distance (m) 20
Auto Cleaning ¡Ì
Water Lack Protection ¡Ì
Dimension (mm) :1100*1100*980
Net Weight (kg): 76
Discharge:down
Technology features:
Use of number of effects and TVR to enhance steam economy.
Optimum design for smooth operation.
PLC based control system for efforts free operation.
Clean and color free condensate to be recycled to process.
Industrial effluent concentration:
KEP Engineering providing Technology for zero effluent discharge. In which maximum waste water can be reused for the process. Which indirectly avoid the ground water extraction.
Chemical product concentration
KEP Engineering providing Technology for Chemical Product concentration. Its economical process as steam consumption is less as compared to any other technology .
Distillery spent wash concentration
Evaporation plant specially design for Grain and molasses based distillery. Concentration of spent wash under vacuum to get better quality cattle feed from dryer.
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.
Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.
Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.
Salt Evaporator:
Salt Evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Wooden case.
3745 Evaporator Suppliers
Short on time? Let Evaporator sellers contact you.
Industrial Evaporator
industrial Evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Brine Evaporator:
Bine evaporator can be used for low temperature continuous evaporation and concentration,and its feature is high heat transmission coeffcient and short heating time of material.It is especially suitable for materails with thermal sensitivity,viscosity,or foamability.This type of evaporator is widely applied to the industries of salt manufacturing,milk,glucose,starch,xylose,pharmacy,chemical,biological engineering,environmental engineering,waste liquid recycling and so on.
Composition:
The Sodium evaporator is composed of the heating evaporators for each effect,segregator for each effect,condensor,heat pressure pump,vaccum system,feed liquid conveying pump for effect,condensed water outlet pump,operating platform,control cabinet of electrical appliances,pipleline and so on.
Features of sodium evaporator:
1.Due to the even heating of steam and flow evaporation of feed liquid film type,the whole heating system features high heat transmission efficiency and short heating time. Equipped with a heat pressure pump,our evaporator is energy-saving and features low steam consumption and low cooled water circulation volume.
2.The material is evaporated flowingly under increased pressure and speed, along the pipe wall from upper to down. Therefore the evaporator is suitable for materails with high viscosity.
3.Since ther material is of film evaporation in each pipe,the heating time of feed liquid is very short.Hence,our sodium chloride evaporator is perfectly suitable for the evaporation and concentraion of food,and could greatly keep the nutrients in food.
4.The evaporation is performed under the vacuum condtion,which not only meets the requirements of hygiene and environment protection,but also greatly lowers the evaporating temperature. The heat pressure pump used in our evaporator takes partial secondary steam into device again and make it mix with live steam, which greatly reduces steam consumption.The steam in the heat pressure pump sprays out like the mist and enters into the heating casing,and then spreads quickly and heats the feed liquid mildly.So our sodium chloride evaporator can be used to evaporate thermal sensitive materials.
5.This evaporation equipment is also suitable for materials with foamabilty.The feed liquid is of film evaporation in the heating tube,which forms steam-liquid separation.In addition,most feed liquid is pumped out, and only at a small amout of feed liquid and all secondary steam enter into the segregator for forced separation.There is no big impact in the whole process,which avoid the forming foam.
Model:jh18ap-10bd
Product name: inverter evaporative air cooler
Feature:airflow from bottom, 16-speed, made of plastic.
Airflow:18000m3/h
Air pressure:200pa
Power supply:220v/50hz
Power consumption:1.1kw
Exterior size:1100x1100x950mm
Wind exit size:642x642mm
Fan type:axial
Noise: ¿¬48-73 db(a)
Effective area:100-150m2
Share seawater evaporators characteristics:
1. It is made of 316 stainless steel and has been done a series of surface treatment which has strong corrosion resistance.
2. Famous brand accessories guarantee the quality.
3. Acid and alkali resistance salt water pumps, well-designed water tanks could avoid turbulence caused by waves.
4. Finished appearance, perfect details.
Instruction
1. Standard working condition: 25íµ ambient temperature; 18íµ water inlet temperature.
2. Refrigerants: R22/R404A
3. evaporation temperature: -20 íµ
Technical data
type Output ú¿Ton/24hrsú¬ Refrigerating effect
ú¿kcal/Hú¬ Water inlet /drain pipe dia. Dimension of machine
(mm) weight
ú¿KGú¬
ZFES-1T 1 8.7kW 1/2" 900*500*940 198
ZFES-2T 2 17.4kw 1/2" 1100*700*1200 220
ZFES-3T 3 26kW 1/2" 1100*700*1300 250
ZFES-5T 5 43.6kW 3/4" 1390*835*1335 500
Note: All the parameter will be changed subject to technical innovation without further notice.
Pecificationú¦
1.Working voltage: 12v, 24v
2.Static pressure: 100pa
3.Air volume: 1700m3/h, 2000m3/h, 2200m3/h
4.Curved blades and straight blades
5.Pull type and push type with various dimension....
Features:
1.Thin
2.Light
3.Long life
4.High efficiency
5.Quiet
The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configured compressor, then raise the pressure and temperature to a certain range, and finally transfer it to the relevant heating chamber of evaporator as heating steam. Finally, to perform the condensation heat release program, so that it can help the latent heat of the steam and the recycling can be effectively obtained.
Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar
Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN500
The plate evaporator is ingenious in design, so the heat transfer efficiency is higher than that of the general evaporator. Generally, the plate evaporator area only needs about one-half of the tube evaporator then can achieve the same evaporation effect.
Plate evaporator
Compact overall structure
The whole structure is compact, floor space is small, and there is no need to invest too much manpower and material resources in the later use process. For some maintenance work, it only needs to be carried out in the original space range, and it's very simple whether it is disassembled or installed .
Plate evaporator
Diversification of components
The heat exchange area can be effectively adjusted according to the customer's needs: now the heat exchange area of different evaporators has different ranges, since the heat exchanger plates can be disassembled, so multiple components with multiple skills and more new functions can be provided through adjusting number of plates and changing relative flow path.
Plate evaporator
Small heat loss
Because this type of equipment is compact in structure and relatively light in weight, compared with tubular evaporators, it also reduces heat loss, and such equipment usually does not need to be insulated.
Plate evaporator
Less pressure loss
Under the same heat transfer coefficient condition, such evaporator equipment can control the pressure loss within a certain range by rotating a reasonable flow rate.Compared with tubular evaporator,it can reduce 2/3 pressure loss.
Plate evaporator
Stable and safe operation
Different sealing procedures are designed on the sealing device between the plates, and
Range of application
Metallurgy, food industry, paper industry, air conditioning, chemical and desalination industries
Features
1, quick and easy lifting mechanism:
Re201d, re301 and re501 rotary evaporators are water tank lifting. Turning the handwheel on the oil/water bath drives the bath to lift and go down. Re52 series is the motor thread lifting, that is, turning the handwheel on the screw stem will drive the rotating flask, rotating motor, condenser and collecting flask to lift or go down at the same time.
2, the evaporators can incline willfully along the horizontal direction within 0-45¡ã
3, high evaporation rate vertical condensation system
The condenser adopts two structures. One is the dual pipeline convection principle and is used for evaporating organic solvents. The other is single pipe container with interlayer that could hold cooling water, ice and drikold. It is vertical type to decrease volume and is used for evaporating organic solvents.
4, heating tank
Stainless steel heating tube provides heat source. The temperature range will be rt~99 ¡æ with water. The water tank is cylindrical and made of high quality stainless steel. So it is corrosion resistance and durable. The tanks are available for 2-20liter rotating flask heated. Moreover, the tank can be moved according the rotating flask size.
5, vacuum sealing
Ptfe evaporating pipe, good sealing and heat-resisting. Joint part is sealed fluorine rubber mat which brings good performance.
6, automatic temperature control digital display
Temperature digital display and control by pt100 sensor. When the pre-selected temperature is reached the temperature you setted, the controller automatically will turn off the heater supply, when it is lower than the pre-selected temperature, controller will switch on automatically to realize constant temperature.
7, rotating flask and collection flask
The flasks are made of gg-17 high borosilicate glass which is blowed by hand. Their intensity, concentricity, glossiness, and surface finish are better than rough flasks.
Wooden cases or as your requirement
3745 Evaporator Suppliers
Short on time? Let Evaporator sellers contact you.
