L-signal measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming.
Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside.
Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80.
On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 6000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 15000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 12000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
4822 Di Switch Signal To Rs485 232 Converter Suppliers
Short on time? Let Di Switch Signal To Rs485 232 Converter sellers contact you.
On grid / Grid-tied
Rated power: 10000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 8000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
-10/100M self-adaptive Ethernet Interface
-Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection
-Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily
-Auto reconnection after a network break, ensure the reliable TCP connection for the whole network
-Support DNS, can achieve a communication using the domain name
-Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules
-TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time
-Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications
-Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration
-16 bits ARM7 CPU;
-Ethernet: 10/100Mbps
-Protections: build-in 2KV surge protection
-Type:RS232, RS485
-Control Signals :TXD,RXD,GND
-Parity: None, Even, Odd
-Data Bit: 5, 6, 7 or 8 bits
-Stop Bit: 1 or 1.5 bits
-Flow Control: Non
-Baud Rate: 1200bps~921.6Kbps
-Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP
-Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server
-Ethernet Connector: RJ-45
-Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events
-Software Tool: VSP Driver, DS Manager, Web Server
-Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration
-Power Input: 3.3V DC
-Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)
Input voltage DC12V~DC24V
Input signal PWM x3CH
(compatible with CV/CC Power PWM and Signal PWM)
Output 10V PWM x3CH
Dimming Range~100%
working temperature -30?~55?
Dimension L121×W39×H39(mm)
Package Size L123×W42×H42(mm)
Weight (G.W) 80g
Single Phase to 3 Phase Converter, MY-PS-30 Model, Suitable for 25HP(18.5Kw) 75 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type
DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home.
We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application.
- Features of DPS
1. DPS can run 3 phase motor from single phase
2. Digital Type Phase Converter
3. Excellent start-up torque
4. Efficiency is excellent versus other phase converter
5. Small size & easy to install
6. Low failure rate
7. Keeps out dust, moisture, and heat due to the sealed type
8. Designed to be non-flammable
9. Doesnâ??t make any high frequency
10. Lower power consumption
Single Phase to 3 Phase Converter, MY-PS-20 Model, Suitable for 15HP(11Kw) 45 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type
DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home.
We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application.
- Features of DPS
1. DPS can run 3 phase motor from single phase
2. Digital Type Phase Converter
3. Excellent start-up torque
4. Efficiency is excellent versus other phase converter
5. Small size & easy to install
6. Low failure rate
7. Keeps out dust, moisture, and heat due to the sealed type
8. Designed to be non-flammable
9. Does not make any high frequency
10. Lower power consumption
Enerna IoTech WiFi RF433 Smart Roller Blinds Shutters Electric Motor Remote Control Curtain Switch Module makes it easy to control all sorts of window Coverings including roller blinds, venetian blinds, and shutters, so you Can open and close them anytime, anywhere, with no hub required. It Allows you to set schedules and timers via the Smart Life app and enjoy Hands-free voice control with Amazon Echo and Google Home. this switch Also features a built-in RF433 receiver and is compatible with remote Controls. Enjoy your smart life with other smart products.
1. Convenient to Use: Converts regular switches into smart devices for Easier, more convenient control of blinds, shutters, and curtains.
2. Hands-Free Voice Control: Connect to Amazon Echo or Google Home and enable hands-free, voice-activated control.
3. Wireless Remote Control: Use the Smart Life/Tuya app available on iOS and Android and open and close blinds from anywhere, anytime.
4. Multi-Functional Use: Use with all sorts of window coverings anywhere in the home or even with awnings in the back yard.
5. Schedules and Countdowns: Automate your home by setting schedules, Timers, and countdowns, so you'll never need to worry about forgetting To close the blinds again.
6. Family Sharing: Supports one mobile phone to multiple devices and Multiple devices to one mobile phone, so you can share control with the Entire family.
Package:
1x Enerna IoTech WiFi RF433 Smart Roller Blinds Shutters Electric Motor Remote Control Curtain Switch
1x Instruction Manual
1x2 optical switch-micro optical switch
low insertion loss
wide wavelength range
low crosstalk
high stability,high reliability
epoxy-free on optical path
latching and non-latching
applications:
r&d in laboratory
system monitoring
oadm
man (metropolitan area network)
Sun-fsw-1x2 optical switch, which is famous for its high performance, low insertion loss and compact dimension. With compact package, it can be easy to integrate into a high density optical communication system.
1x2 optical switch - specifications
Wavelength Range : 850 / 130 �±40 1260 ~ 1650
Test Wavelength : 850 / 1300 1310 / 1550
Insertion Loss 1, 2 : Typ: 0.8 Max: 1.2 Typ: 0.6 Max:0.8
Return Loss 1, 2 : MM 30 SM 50
Crosstalk 1 : MM 35 SM 55
PDL : 0.05
WDL : 0.25
Repeatability :0.02
Operating Voltage : 3.0 or 5.0V
Durability : 10 Million
Switching Time : 8 ms
Deyang Dongfang Yoyik is a trade production company with many international brands. Our source is authentic, product is quality guaranteed, price is reasonable, welcomed by our new and old customers. We also sell all kinds of processing parts, non-standard parts for power plant dedicated.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-PRESSURE SWITCH BPSN4KB25XFSP19-DF
OPC solenoid valve coil PAT5002253 130VDC 19W
thermocouple sensor TE-110
high pressure piston pump PVH74QIC-IS-10-C25-31
centrifugal pump suction YCZ50-250
pump coupling PVH74QIC-RSF-1S-10-C25-31
thermocouple k type WRNK2
OIL BAFFLE 3FK5F32M-06-04
Bearing NA5920-NTN
Counter Display CR0464 165
piston vacuum pump PVH074/PVH098/PVH131
glass mica tape 0.1*25mm
high pressure oil pump 50SDZ-45
M6 thread WRNK2-346
non-return valve S15A1/2
pump vacuum P-1758
thermocouple range TE-213
roots vacuum pump P-1825
k type thermocouple 1200c TE-205
one-way throttle valve DRV30-1-10/2
transfer pump fuel G25-1A1000single screw pump HSNH280-43N7
thermocouple thermometer WREK2-191
coupling XL3
screw pump stainless ACF080K41RBP
Thermocouple Cylindrical sensor TE-304
3 wire thermocouple TE-104
PRESSURE SWITCH BPSN4KB25XFSP19
Resistance Thermometers WRNK2-0901T �?5
mechanical seal 34 mm 15F4-IC-20
pressure gauge ABZMM63-400BAR/PSI-R/B-G
heater thermocouple WRNK2-191M
dongfang Nitrogen reducer YQD-II
thermocouple TE-303
Pt100 temperature probe WZPM2-001
axial piston pump PV29-2R5D-COO
thermocouple cable WRNK2-331T
radial piston pump PD060PC02SRS5AC00E1200000
high temperature thermocouple TC03A2-KY-2B/S15
Sealant MFZ-3Platinum Wire WH-5A421.575
dc screw pump ACF090N5ITBP
solenoid valve plug DG4V-3-2AL-VM
Thermocouple WRN2-0301T
rotary vane pump F3-SDV20-1P11P-1A
reciprocating piston pump PVH098R01AJ30A250000002001AB010
TC Sensor TE-105
hydraulic piston pump spare parts 50SDZLJ-40Ax1.3
thermocouple temperature sensor WRN-330
rotary vane pump F320V12A1C22R
furnace thermocouple WRNK2-321\8\K
Hot water Line valve actuator LR24A-SR
three screw pump 3GR30*4
mechanical seal pdf 104-45
mechanic seal water pump 104G-40
globe throttle check valve KJC25C-1.6P
screw pump working DLZB820-R67
thermocouple digital WRNK2-332
pressure regulating valve DB20-2-52/315E
thermocouple range TE-212
Solenoid valve 4WE10D50/EG220N9K4/M
twin screw pump DLZB820-R64A-8
Solenoid valve 8223G003\220VAC
PRESSURE SWITCH BPSN4KB25XFSP19
DFYL-2022-2-24-ZYR
4822 Di Switch Signal To Rs485 232 Converter Suppliers
Short on time? Let Di Switch Signal To Rs485 232 Converter sellers contact you.