Combined relative pressure probe: conductivity, temperature and depth (CTD). In-situ measurement. Water level, level measurement in groundwater and surface water.
Relative pressure probe, measures water level and temperature. Integrated data logger. In-situ measurement Water level, level measurement in groundwater and surface water.
Measurement and data logging of atmospheric (barometric) air pressure. Compensation probe for absolute pressure level measurement. Water level measurement in ground and surface water.
The RainLog 2.0 data logger is our next generation Rainfall logger and features numerous improvements in memory capacity, process speed, battery replacement, improved protection and USB Connectivity.
16524 Data Logger Suppliers
Short on time? Let Data Logger sellers contact you.
Ld 9121 series temperature and humidity data logger has internal high-precision sensors for temperature or temperature and humidity measurements. There is no need to install any software to automatically generate a pdf report. The device stores maximum 16000 measuring data automatically with selectable sampling intervals from 1s to 24h. It is equipped with intelligent data analysis and management software for data download, graph checking and analysis, etc.
This device is designed with lcd, led indicators and buttons. Real-time readings and alarm information can be displayed on lcd. The two leds flash in red, green and yellow colors to indicate the status of working and alarming. Its easy to operate with the two buttons to check data, start logging and clear data.
Web Enabled By Logger:
WEDL-Cloud Based is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server.
Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications.
Applications:
Plant Process data Monitoring.
Energy consumption Monitoring and Control applications.
Gas, Pollution Monitoring applications.
Water flow Monitoring and pump house remote control applications.
Model:S273
Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;
4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert;
11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC;
12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
13. Supports remotely restart the RTU, and configure it by SMS commands remotely;
14. Supports over voltage protection and phase-reversal protection;
15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Rugged Data logger with integrated 4G/LTE cellular modem â?? direct mounting on well casings. Battery or solar operated data logger, remote data transmission Application: Groundwater and surface water
Model: S262 S263
Name: GSM GPRS 3G Data Logger
The GPRS 3G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly.
1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
2. Programmable by SMS Commands or PC Configurator via USB;
3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS;
4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS;
5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ;
6. Daily report, schedule upload, event upload;
7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status;
8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events;
9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center;
10. Internal memory, can save the historical data for review;
11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers;
12. Rechargeable Backup Battery inside can last 18hours;
13. Standard DIN Rail 35mm installation or outdoor enclosure.
Model:S272
Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
Mainly Features:
1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system;
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;
4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
10. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC;
11. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
12. Supports remotely restart the RTU, and configure it by SMS commands remotely;
13. Supports over voltage protection and phase-reversal protection;
14. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
15. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
GSM Home Alarm Systems, GSM Medical Alarm, GSM SMS Controller Alarms, GSM GPRS data Logger, GSM Telemetry Systems (M2M),GSM Gate Opener.
Remote Monitoring your assets in anywhere and anytime
An Innovative GPRS RTU to reduce your management costs
GSM GPRS RTU Telemetry Data Logger
GSM GPRS RTU Telemetry Data Logger M2M
GPRS Terminal with RS485
GPRS Telemetry with SCADA
GPRS Data Logger with Modbus RTU protocol
GPRS Controller with Modbus RTU protocol
GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
The features and functions of GSM GPRS RTU Telemetry Data Logger S240:
1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside
2) Direct connection to the GSM GPRS Network
3) Transparent Serial Data Tunneling using low cost SMS/GPRS network
4) Remote Configuration by SMS Messages or GPRS
5) Upload data via GPRS or SMS on Schedule or event occurs
6) Supports Dynamic Domain name or Static IP address
7) Supports SMS, GPRS UDP and TCP protocols
8) Supports Modbus RTU protocols
9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port
10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers
11) 6 digital inputs can be used as Pulse Counters
12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off
13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA)
14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55 AC to +125AC Fahrenheit equivalent is -67 to +257 accuracy from -10¡AC to +85 AC, Thermometer resolution is programmable from 9 to 12 bits
15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA
16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name
17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it
18) More Protocols can be updated by user through USB Port with the updated firmware
19) Power supply 9V to 24V(Recommend 12VDC)
20) Size: 168mm*113mm*32.3mm.
Standard packing list of GSM GPRS RTU Telemetry Data Logger S240:
1X Mainframe
1X AC/DC adaptor
1X User Manual(CD)
1X GSM ANT
PC Configurator is free charge in the CD
With internal back up battery.
1X Mainframe
1X AC/DC adaptor
1X User Manual(CD)
1X GSM ANT
PC Configurator is free charge in the CD.
Remote Monitoring your assets in anywhere and anytime!
An Innovative GPRS RTU to reduce your management costs!
GSM GPRS RTU Telemetry Data Logger
GSM GPRS RTU Telemetry Data Logger M2M
GPRS Terminal with RS485
GPRS Telemetry with SCADA
GPRS Data Logger with Modbus RTU protocol
GPRS Controller with Modbus RTU protocol
GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.
The features and functions of GSM GPRS RTU Telemetry Data Logger S240:
1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside;
2) Direct connection to the GSM GPRS Network;
3) Transparent Serial Data Tunneling using low cost SMS/GPRS network;
4) Remote Configuration by SMS Messages or GPRS;
5) Upload data via GPRS or SMS on Schedule or event occurs;
6) Supports Dynamic Domain name or Static IP address;
7) Supports SMS, GPRS UDP and TCP protocols;
8) Supports Modbus RTU protocols;
9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port;
10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;
11) 6 digital inputs can be used as Pulse Counters;
12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;
13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA);
14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55¡ãC to +125¡ãC. Fahrenheit equivalent is -67¡ãF to +257¡ãF, ¡À0.5¡ãC accuracy from -10¡ãC to +85¡ãC, Thermometer resolution is programmable from 9 to 12 bits;
15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA;
16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name;
17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;
18) More Protocols can be updated by user through USB Port with the updated firmware;
19) Power supply 9V to 24V(Recommend 12VDC);
20) Size: 168mm*113mm*32.3mm.
Standard packing list of GSM GPRS RTU Telemetry Data Logger S240:
1X Mainframe
1X AC/DC adaptor
1X User Manual(CD)
1X GSM ANT
PC Configurator is free charge in the CD
With internal back up battery.
Fresh-key USB is developed to be a premium USB temperature data logger. With carefully selected components, fresh-key USB presents with solid performance since its developed, it has proven records to work in any strict scenarios.
We have high-Tech in house amenities available to make sure that the range of products we offer are kept safe till final delivery our team experts ensure that the warehouse is free from moisture ,rainwater, sunlight etc .Our assurance towards providing damage free products to the clients is achieved ,through our use of quality packing material.
Model: S262 S263
Name: GSM GPRS 3G 4G Data Logger
Keyword:
GSM GPRS 3G 4G data logger manufacturer, GSM GPRS 3G 4G Data logger, GSM 3G 4G Data Acquisition Systems, GSM 3G 4G data logging system, Wireless gsm Temperature-Humidity Chambers monitoring, wireless 3G temperature and humidity meter, wireless GSM temperature and humidity recorder, Wireless GSM humidity and temperature sensor.
The GPRS 3G 4G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-highâ??high, lowâ??ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly.
Module Comparison Instruction Table
Model Application Input Types
S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :55°C to +125°C (67°F to +257°F), 0.5°C accuracy from 10°C to +85°C.
S261/S261C/S261W Outdoor
S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs.
S263/S263C/S263W Outdoor
Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67.
*C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA.
Mainly Features:
1.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
2.Programmable by SMS Commands or PC Configurator via USB;
3.2 alternate Server via GPRS/3G wireless network, supports IP address and DNS;
4.Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS;
5.GPS module is optional, measure the Longitude,Latitude,Speed,Direction ;
6.Daily report, schedule upload, event upload;
7.6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status;
8.One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events;
9.4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center;
10.Internal memory, can save the historical data for review;
11.External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers;
12.Rechargeable Backup Battery inside can last 18hours;
13.Standard DIN Rail 35mm installation or outdoor enclosure.
Product Description Cloud Data logger/IoT/GPRS/WiFi/ is a combo device that provide data logging along with cloud computing facility. It reads the data from any digital device through RS232 or RS485 (Modbus-RTU) and stores, uploads the same by user defined interval.
Hardware Feature:
Up to 8/16/32 devices can be connected simultaneously on a single serial port.
20 registers per device can be configured for saving data.
Total 3 00 000 records can be saved in data memory.
Cellular modem for data transmission (GSM/GPRS).
USB keyboard connectivity for configuring devices.
Report dumping in Pen drive in .xls format for reporting.
User defined time intervals for data logging & uploading.
Provision for manual data collection & upload.
No need for installing additional, costly SCADA/PLC systems.
Software Feature:
Authorized access on the server for better security.
Data easily accessible from anywhere across the globe.
Excel format report can be generated on web application.
Provision to create multiple users on web application.
It is a Cross- platform software.Can run be on any operating system.
Can run on devices like mobile phones, tablets, laptops, desktops etc. that have a web browser installed.
Daily Reports can be generated through web application and shared via email.
Advantage:
Real time monitoring of Digital indicators/process parameters at plant/factory.
Any controlling measure can be done on immediate basis.
SCADA & Computer system not required.Internet connection is not required at site.
Cost effective, as it works on GSM technology.
Password protected for better security.
Unauthorized access to data is restricted.
Autosave feature to prevent data loss during network failures. Device will save the data and send it to the destination when the network is up and running.
Isolated from current system to avoid any hindrance in process execution.
Specification:
Up to 8/16/32 devices can be connected via RS485 modbus protocol.
Flexible configuration at the user's site for settings like 20 Registers per device, baud rate, bits and parity.
Configurable header for each register.
40,000 record saving capacity for each device with timestamps.
Data logging within device at user defined intervals.
Supports standard IBM Keyboard for device configuration.
Manual data collection & uploading option.
Cloud logging at user defined intervals. Cloud logging interval is common for all devices.
In case of network issues, the records are auto-saved and sent to server once the connectivity resumes.
Standard mobile 2G SIM is used for data transmission to cloud server.
Convenient Housing (200 x 190 x 96 mm) which can be easily mounted on panels.
Application:
Industrial Control Panels
Industrial Automation
Cold Rooms
Blood Refrigeration Banks
Energy Monitoring System
RMC Plants
Asphalt Mixing Plant
Weighing Application
Process Control
DWEL-2020 is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server.
Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications.
Applications
Plant Process data Monitoring.
Energy consumption Monitoring and Control applications.
Gas, Pollution Monitoring applications.
Water flow Monitoring and pump house remote control applications.
FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port as photo shows here.
FEATURES
True-RMS measuring parameters
ANSI and IEC 0.2 accuracy class
Power quality analysis
4 quadrant energy
2MB onboard memory, can be extended to 16M
Data logging
High-speed RS485, Ethernet port (option)
Measure individual harmonics from 2nd to 63st (option)
TOU, 4 Tariffs, 6 Seasons, 6 Schedules
Three years warranty
With PC management software; web browse data
APPLICATIONS
Metering of distribution feeders, transformers, generators, capacitor banks and motors
Medium and low voltage systems
Commercial, industrial, utility
Power quality analysis
Data logging
Monitoring system
Power Supply (AC/DC) AC85-400V / DC85-330V
Power consumption:
Blue Jay Electronic provide temperature & humidity logger
solution, build on our temp. & RH controller can control
environment condition and record the temp. vibration.
The time interval is set by programming can be from 1
second to 2 hours. Use EEPROM s which can store up to
40,000 measurements. This could be one measurement
every 30 seconds for 11 days for example.
The control function with completed FUZZY algorithm
provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to
maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show
environment temperature and humidity as per configure by user. The user also can adjust environment
condition very easily.
Function & Feature
·DIN(48X48mm) or panel mounting
·High measurement indication and control accuracy 0.5?? and 3% RH
·Heat/Cool control and PID control mode
·All settings except time maintained permanently in non-volatile memory until changed by user
·Built-in digital filter reduce interfere
·Self calibration technology, keep stabilization
·Two line LED display show the data Independent, prevent dazzle, highly visible display
·Simple 4-Button user interface
·Switching power supply and low consumption
·Use large capacity relay
·RS 485 interface, easy to get raw data
16524 Data Logger Suppliers
Short on time? Let Data Logger sellers contact you.
