Draw a billet, a primary processed goods, to make it a circular pipe. Reconduct
drawing to produce brass tubes in various shapes and sizes.
Copper Alloy Tube has a fine degree of Mechano-Luminescence property and plating
and drawing performances. It is lead-free and mainly utilized as a material for heat
exchanger, faucet or fire extinguishing unit.
Decide after checking dies production.
Jointless Copper Alloy Tube C2600/KSD5301
We offer copper alloy brazing rod. These alloys have been used for thousands of years. these alloys are highly ductile and malleable and can be easily worked.our organization procures the best quality raw material available in a wide range of compositions in order to suit the specific applications. these alloys are fully oxidized to retain the gloss and provide longer life service.
Bi-metal strip (sheet/plate) backed with high quality low carbon steel and sintering bronze powder on the surface,is forming by several time high temperature sintering and extrusion rolling. Then it can be produced into bushing by blanking, rolling, forming, sizing, tinning and other machining.
With excellent wear resistance and good physical and mechanical properties,this kind of bi-metal strip (sheet/plate) is a kind of ideal ease-friction material, applying to producing sliding bearing, thrust washer, lateral plate, bearing bushing and other mechanical components, especially in auto industry.
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
Typical application for c17200 beryllium copper alloys:
Electrical industry: electrical switch and relay blades, fuse clips, switch parts, relay parts, connectors, spring connectors, contact bridges, belleville washers, navigational instruments, clips
Fasteners: washers, fasteners, lock washers, retaining rings, roll pins, screws, bolts
Industrial: pumps, springs, electrochemical, shafts, non sparking safety tools, flexible metal hose, housings for instruments, bearings, bushings, valve seats, valve stems, diaphragms, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, bourdon tubes, wear plates on heavy equipment, bellows
Available sizes:
Custom diameter & sizes, random mill lengths
Available products (forms):
Round bars, round strips, round wires, round tube,
Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils
Custom shapes are available upon request.
Alloy code: Special alloy, C14500íóC14510íóC14520íóC14700.
Application fields: It is mainly used for electronic industry department.
Performance: Special alloy í¦85%í½í¦100%;
Thermal conductivity: í¦500Wm1k1ú¼C14500íóC14510íóC14520íóC14700, which is carried out
as per standard of Designationú¦B 301
74151 Copper Alloy Suppliers
Short on time? Let Copper Alloy sellers contact you.
Item copper alloy tube
Type Straight copper tube
Standard ASTM,JIS,EN
Material TP1,TP2,T2
Out diameter 4mm-38.1mm
Wall thickness 0.2mm-1.8mm
Ultimate Strength (â?¥ MPa) 205
Elongation (â?¥ %) 40
Tolerance As required
Length 1m, 2m, 3m, or as required.
Temper soft annealed, special tempers on request
Surface Mill, polished, bright, oiled, annealed, etc.
Cleanliness all annealed coils meet or exceed the cleanliness levels
Specification. Coils are capper with plastic end caps.
Price FOB, CFR, CIF
Payment TT, L/C
ASTM/ ASME sb 336 uns 2200 ( nickel 200 ) , uns 2201 (nickel 201 ) , uns 4400 (monel 400 ) , uns 8020 ( alloy 20 / 20 cb 3 ) , uns 8825 inconel (825) , uns 6600 (inconel 600 ) , uns 6601 ( inconel 601 ) , uns 6625 (inconel 625) , uns 10276 ( hastelloy c 276 )
Copper Alloy
ASTM / ASME sb 111 uns no. c 10100 , c 10200 , c 10300 , c 10800 , c 12000, c 12200, c 70600 , c 71500 .
ASTM / ASME sb 466 uns no. c 70600 (cu -ni- 90/10), c 71500 (cu -ni- 70/30)
Manufactured using high grade raw material, these are available in different sizes and shapes. Our pipes have been widely appreciated for their sturdy construction and durability.
Range
15 nb up to 1200 nb in sch 5s , 10s ,10, 20 , 40s , 40 , std , 60 , 80s , 80 , xs , 100 , 120 , 140 , 160 & xxs
form
seamless / erw / welded in round & square .
We Hitesh Metal. is a distinguished manufacturer, exporter and supplier of a wide assortment of Copper Alloy Wire Mesh. The offered mesh is broadly used for commercial and non-commercial applications.
Our range is widely acclaimed by our clients for its characteristic features such as durability, corrosion resistance and high tensile strength, Electromagnetic and thermal conduction properties, Resistant to atmospheric corrosion, Anti sparkling, Darkens after a period of time.
Cube2--C17200 (CDA 172) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches Rockwell C45. Meanwhile, the electrical conductivity is a minimum of 22% IACS in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
International Specification:
Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651;
RWMA Class 4
Strips:ASTM B194, AMS4530,4532; SAE J461,463
Sheets: ASTM B194
Wires:ASTM B197, AMS4725, SAE J461,463
Plates:ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4.
European Standards: CuBe2, DIN 2.1247, CW101C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification (Published by SAE)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to ASTM.
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Round strips, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.
Chemical Composition:
Be: 1.85-2.10%
Co+Ni: 0.20% Min.
Co+Ni+Fe: 0.60% Max.
Cu: Balance
Note: Copper plus additions equal 99.5% minimum
Typical Physical Properties:
Density (g/cm3): 8.36
Density before age hardening (g/cm3): 8.25
Elastic Modulus (kg/mm2 (103)): 13.40
Thermal Expansion Coefficient (20 ípC to 200 ípC m/m/ípC): 17 x 10-6
Thermal Conductivity (cal/(cm-s-ípC)): 0.25
Melting Range (ípC): 870-980
Note:
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.
HUAZHONG HZ-CUP-2 brazing alloy is used for the brazing of copper and copper alloys, brass and bronze. It can also be used on silver, tungsten and molybdenum. It is primarily used for the joining of copper to copper on vibration free joints. It is very effective for joining tight fitting and tubing. HZ-CUP-2 is extremely fluid at temperatures and will penetrate joints with very little clearance. The phosphorus content of HZ-CUP-2 acts as a fluxing agent and no flux is necessary when brazing copper to copper joints. However, when used with a copper alloy or one of the brazeable metals, a flux must be used to promote wetting, bonding and flow throughout the joint.
DL Industry Group Limited is famous supplier, exporter and manufacturer of beryllium relevant products since 2018
Main producs:
1. Beryllium metal
Beryllium metal can be used to make beryllium powder, beryllium rods, beryllium foil, etc., and can be used in nuclear reactors, nuclear reactor devices, space telescopes, and medical detection beryllium windows.
2. Beryllium oxide
CAS: 1304-56-9.
Molecular formula: BeO
Beryllium oxide is mainly used in the manufacture of special ceramics, and glass. It can also be used as nuclear reactor fuel and moderator, and as an organic reaction catalyst.
3. Beryllium Copper Master Alloy
Other Name: Copper Beryllium Mater Alloy, Beryllium Copper Ingot
By adding beryllium copper master alloy during the casting process of beryllium copper alloy, beryllium copper alloy products with high strength, high conductivity and high elasticity can be obtained.
Main production: CuBe3.3, CuBe4(Beryllium Copper Master Alloy Be:3.8-4.3) and CuBe10(Beryllium Copper Master Alloy Be>9.8).
5. Beryllium Aluminum Master Alloy
Main production: AlBe3, AlBe5
Beryllium Aluminum Master Alloy AlBe3 is mainly used for producing magnesium aluminum alloy or named magnalium alloy
Beryllium Aluminum Master Alloy AlBe5 is mainly used of producing the aluminium silicon alloy
We are the biggest supplier of Copper/ Brass / Alloy manufacture in Mainland China.
Any of require product could be ask for shipping.
Copper has several properties that make it ideal for construction and manufacturing, such as:
Copper demonstrates excellent thermal and electrical conductivity, making it suitable for use in electronic and electrical systems and thermal equipment.
It exhibits resistance to many forms of damage, including impact, wear, and corrosion. Additionally, it maintains its strength when flexed, formed, and drawn.
Bacterial antimicrobial resistance.The material resists bacteria without degrading. It even kills bacteria that are exposed to its surface. This quality makes it ideal for use in food-safe equipment.
- Alloy 101/110/122/145 etc.
Payment available bank transfer / Letter of Credit.
Al-Brass: Al-Brass is an alloy containing aluminium. It is frequently used for heat exchangers due to its high corrosion and seawater resistance property.
Application: Condenser for thermal/nuclear power generation, condenser for vessels, feedwater heater, etc.
