The key to the ceramic filter is the porous ceramic filtration plate. The unique constructure of ceramic plate creates uniform micropores which establish the
Capillary action effect creating an almost absolute vacuum ( less than 0.096mpa) by which only liquid could flow through the plate and air cant pass through the plates.
Characteritics
1. Framework has high concentration, film has high intensity, excellent resistance to wear, compression and corrosion. White alundum is electrically melted and moulded into grads with 500t hydraulic press and 1800 whole agglomeration, pressure resistance can reach 8bar.
2. High open porosity and productivity; high filtering precision, low vacuum consumption. Fine materials, whole compound, stick without glue, good water permeability, open porosity can reach 92adopt 1800mesh superfine white alundum film-spraying pre-coating technique which has good capillary function and low vacuum consumption.
3. Many methods for regeneration, service life is greatly prolonged. It can be cleaned with organic solvent under high temperature and high pressure with good regenerating effect and long service life.
Anchor Catalyst Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust, and SO2, HCL, NOx, and Dioxins at the same time. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
10. Multi-Pollutant Control - Control PM, SO2, HCl, NOx, Dioxins, HAPS With One Single System
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000�°C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Sintered ceramic materials are formed by the Sintering method in this method ceramic powder particles heat to the green compact part to a high temperature below the melting point when the material of the separate particles diffuses to the neighboring powder particles.
FAFS Ceramic Filters are used for the protection of Gas Turbines and the reduction of emissions from environmentally - conscious Coal Fired, electric power stations.
75070 Ceramic Filters Suppliers
Short on time? Let Ceramic Filters sellers contact you.
Ceramic foam filter used for casting
Our products have many advantages such as superior porosity, big m2/m3, high temperature resistance and excellent thermal shock resistance (see detail in technical data), it used in foundry, noise elimination and other industries widely. And especially for the foundry & casting industry.
Mechanic deterring: remove big oxide
Filtration: filtrate small impurities and oxide
Commutated function: calm down turbulent f¦claminar flow
Mixed round function: mix the distributaries and confluence flow equality, reduce air bubble
Absorbing function: the myriad eyelets which only been found in microscope can absorb smaller impurities, make more excellent metal liquid
31*31*22(cm) wrapped every pieces with soft plastic materials then packed in carton
The ceramic filter material sold by Ningxia Biyuan Activated Carbon Co., Ltd. is refined by a series of production processes. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, mainly used for water treatment,Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Cff-s is a range of new generation silicon carbide based ceramic foam filters with a consistent, high level performance in terms of metal flow rate and filtration efficiency. Cff-s filters are intended for filtering grey, ductile iron and nonferrous metals at the temperatures up to 1450 â°c. The filters can be placed in the gating system of the mould as well as in combination with exothermic extensions for direct casting/pouring on the filter. They can also be used for continuous non ferrous metal filtering, e.G. Production of copper wires, roads.
Features:
1. High strength
2. Excellent corrosion resistance
3. Outstanding thermal shock resistance
4. Available in kinds of shapes, in a variety of pore sizes, e.G.10ppi, 20ppi, etc.
Functions:
1. Clean iron castings
2. Fewer inclusions
3. Increased casting yield
4. Cost-savings from reduction in scrap
5. Lower costs for machining of the castings
Standard dimensions and technical parameters
Dimensions (mm) Pouring rate(kg/s) Filtration capacity(kg)
Grey iron Ductile iron Grey iron Ductile iron
40x40x22 4 3 65 32
50x50x22 6 4 100 52
75x50x22 9 6 150 75
75x75x22 14 9 220 100
150x150x22 50 36 900 450
170x150x32 62 42 1020 510
200x170x32 84 56 1400 700
D50x22 5 4 80 40
D60x22 6 5 110 55
Above figures are only for reference .Other special specification could be customized.
Model NO.
455khz
Type
Quartz Filter
Transfer Function
Band Pass
Certification
CCC, RoHS, ISO
Trademark
XTAL
Transport Package
Bag
Specification
455khz
Origin
China
HS Code
854160000
Ceramic Filter 10.7MHz DIP&SMD Two Package Size Available for FM Filter:
OUTLINE DIMENSIONS AND MARK
Appearance: No visible damage and dirt. 3.2 Construction: SMD ceramic packaging. 3.3 The products conform to the RoHS directive and national environment protection law.
Items Content
Withstanding Voltage (V) max. 50 (DC 1min)
Insulation Resistance Ri, M min.
Alumina ceramic foam filters mainly used for filtration of aluminum and alloys in filter case .With the excellent corrosion resistance to molten aluminum and strict control of pore size& porosity, the filter can effectively remove micron impurity and provide stable laminar flow to realize higher-quality casting. The alumina ceramic foam filter manufactured by our company has been widely used in purifying system in the founding, low-pressure, semi-continuous, continuous casting of the liquid aluminum and aluminum alloy.
Characteristics:
1, stable chemical composition; 2, excellent bend and compression resistance strength;
3, completely sintering and uniform pore size; 4, three dimensional network structure and small steady-state error;
5, high porosity and low filtration hindrance; 6, high impurities attraction power and perfect filtration effect;
Vacuum Ceramic Filter is now proven the most energy-efficient and enviroment-friendly solid/liquid seperation device which produces an almost absolute vacuum resulting in very dry cake. It makes use of microporous ceramic plates through which no air will pass and only liquid could flow instead of filter cloth.
The key to the ceramic filter is the porous ceramic filtration plate. The unique constructure of ceramic plate creates uniform micropores which establish the Capillary Action Effect creating an almost absolute vacuum ( less than 0.096Mpa) by which only liquid could flow through the plate and air canÆt pass through the plates.
The ceramic filter has been widely used in the field of mining and metallurgy ( such as nonferrous metal mine and fine powder coal ), chemical processing, food, medicine and ceramics industry. The particle size of the slurry varies from 0.5¦m to 3mm, specially suitable for solid-liquid seperation of sand-character materials. The excellent de-watering function could also be gained for clay-character materials after adjusting the properties of slurry.
FILTE AL Ceramic Foam Filters , These filters are used for pouring of Aluminium alloys into chills and into sand moulds , Alumina Ceramic Foam Filters are mainly used for filtration of aluminium and alloys in foundries and cast houses.
Kohs Ceramics, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
Ceramic filter is a new type, high efficiency, energy saving solid-liquid separation equipment, integration of electromechanical, automatic control, ultrasonic cleaning, micro-porous materials and other high-tech in one. Ceramic filter prominent features are: high efficiency, energy saving, good filtering effect, high degree of automation, low running cost, comprehensive utilization of filtrate, cake drying and moisture is adjustable, the filter medium strong adaptability, is widely used in non-ferrous industry, chemical industry, mining, metallurgy and environmental protection, sewage treatment, medicine, food, coal and other industries.
Honeycomb ceramic filter :
Honeycomb ceramic filters are used for liquid metal pouring system of foundry industry. It can remove the gas and non-metallic impurities and so as to remove the slag hole, sand hole, air hole and reduce the waste products. The character are high mechanical strength, anti-corrosion, high temperature and impact resistance, large surface area , high hole rate,etc.
75070 Ceramic Filters Suppliers
Short on time? Let Ceramic Filters sellers contact you.
