Find Verified Bluetooth Adapter With Antenna (Ot B01) Suppliers, Manufacturers and Wholesalers

Main Technical Specification
- Frequency Range (MHz) : 434
- Bandwidth (MHz) : ±3
- VSWR : 2.0
- Gain(dBi) : 1.80
- Max Input power (W) : 50
- Input Impedance () : 50
- Polarization Type : Vertical
- Antenna Length(mm) : 88mm(90) / 108mm (180)
- Connector Type : SMA

The Module Is A Max.4Dbm( Class2 ) Module.
* Fully Qualified Bluetooth V2.0+Edr System.
* Integrated Switched-Mode Regulator.
* Integrated Battery Charger.
* Embedded Kalimba Dsp Co-Processor.
* Integrated 16-Bit Stereo Audio Codec
* 95Db Snr For Dac.
* Enhanced Audibility And Noise Cancellation.
* Integrated With 8M Bits Flash Memory.
* Support Host Interface: Usb Or Uart.
* Support Digital Audio Bus : Pcm, I2S Or Spdif.
* Hsp/Hfp/A2Dp/Avrcp Profiles Support.
* Rohs Compliant.
* Small Outline. 16 X 15 X 2 Mm.
* Applications
* High Quality Stereo Wireless Headsets.
* High Quality Mono Headsets.
* Hands-Free Car Kits.
* Wireless Speakers.
* Voip Handsets.

Bluetooth ver. 2.0+edr certification
Transmit power up to +18dbm(class1)
Low current consumption:
Hold, sniff, park, deep sleep mode
3.0v to 3.6v operation
Full bluetooth data rate over uart and usb
Support up to 7 acl links and 3 sco links
Enhanced data rate(edr) compliant
For both 2mbps and 3mbps modulation modes
Interface: usb, uart&pcm( for voice codec)
Spp firmware with at commands
Rohs compliant
Small outline: 28.2 x 15.0 x 2.8 mm

Application:-
Access point
Domestics and industrial applications
Serial adapter
Gps, pos, barcode reader.

* Maximum of 4dbm (class2) module with antenna
* Bluetooth standard version 2.0 + edr compliant
* Low current consumption
* Hold, sniff, park, deep, and sleep mode
* 3.0v or 1.8 operation
* Supports for up to seven slaves: sco links (3), acl links and piconet (7)
* Interface: usb, uart and pcm (for voice codec)
* Hci or spp, hsp/hfp, hid and dun firmware is available
* For 802.11 co-existence
* Rohs compliant
* Small outline

Applications:
Pda, nb, and car kit
Presenter, mouse, and keyboard
Cordless headset, digital camera and printer
Access points
Gps, pos, and barcode reader
Data collector
Domestic and industrial applications.

Bluetooth standard v2.1+edr.
Integrated switched-mode regulator.
Integrated battery charger.
Embedded kalimba dsp co-processor.
Integrated 16-bit stereo audio codec
95db snr for dac.
Enhanced audibility and noise cancellation.
Integrated with 8m bits flash memory.
Support host interface: usb or uart.
Support digital audio bus : pcm, i2s or spdif.
Hsp/hfp/a2dp/avrcp profiles support.
Rohs compliant.
Small outline. 21 x 16 x 2 mm.

* Bluetooth standard Ver. 2.0 + EDR compliant.
* Low current consumption :
* Hold,Sniff,Park,Deep sleep Mode
* 3.0V or 1.8V operation
* Support for up to seven slaves :
* SCO links<3>,ACL links,Piconet<7>
* Interface: USB,UART&PCM(for voice CODEC)
* HCI or SPP,HSP/HFP,HID,DUN firmware is available
* Support for 802.11 Co-Exsitence
* RoHS compliant
* Small outline. 14 x 12 x 2.2 mm

Applications:-
* PDA,NB, Car Kit
* Presenter, Mouse, Keyboard
* for Cordless headset
* Digital camera & printer
* Access Points
* GPS,POS, Barcode Reader
* Data collector
* Domestic and industrial applications.

Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value)
Frequency:working frequency 2.4 ~ 2.4835 ghz
Consumption:ultra-low power consumption, 3.3vdc operating voltage
Antenna :external antenna
Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system
Certification :comply rohs, reach ce, fcc approved
Other:wifi+bt

Size (mm):19.3x12.4x2.0

Low price bluetooth headset (ot-b11)
1: bluetooth v1.2 compliant;
2: adopting csr bluetooth solutions;
3: radio characteristics: bluetooth tx power class ii
4: frequency: 2.402 ghz - 2.480ghz
5: channels: 79
6: the longest standby time: 200 hours;
7: the longest talk time: 6 hours;
8: rechargeable li-polymer battery;
9: working range: indoor 5 metres, outdoor 10 metres;
10: simple touch call reject, call waiting, voice dialing.
11: adjustable volume control key;
12: blue/red led indication for bluetooth access and power on/off;
13: well suited to both the right ear and the left ear;
14: light and balanced weight design offers wearing comfort;
15: keep user away from electromagnetic wave of mobile phone

Packing: neuter, oem
Weight: 18g

LTE antenna
Frequency: 700-960/1427.9-1510.9/ 1710-2170/ 2400-2700Mhz
Connector: SMA male, pure copper, 36hours salt spray.
Impedance: 50
Gain: 2-3dBi

Antenna trainer

Experiments that can be performed
01. Polar plots & polarization.
02. Wave modulation & demodulation.
03. Antenna gain.
04. Antenna beam width.
05. Element current Study.
06. Front-back ratio study.
07. Antenna matching.
08. Antenna radiation with distance.
09. Antenna Fabrication Study.
10. SWR Measurement.
SPECIFICATION & FEATURES
1.0. Antenna Trainer consists of the following built-in parts:
1.1 RF Generator - 750 MHz Approx. (Output Adjustable)
with Level Display on DPM.
1.2 Modulation Signal -1KHz approx. Sine wave
(Output Adjustable).
1.3 Slot Line Matching Stub - Slider Type.
1.4 Directional coupler - Forward and Reverse
( Selectable ).
1.5 Antenna Rotation - 0-360 Deg.Resolution 1 dig.
1.6 RF Output Connector - 75 ohm.
1.7 Main ON/OFF Switch and Jewel light for power Indication
and Power Cord.
1.8 Power supply -230V AC 10ª% 50Hz.
2.0. RF Detector with Level Adjustable Analog Meter with
Mounting Stand.
3.0. Antenna Fabrication Kit Including to PCB's and
+ Kg.14 S.W.G. wire roll.
4.0 Good Quality, reliable terminal/sockets are provided at
appropriate places on panel for connections / observation
of waveforms.
5.0 Strongly supported by detailed Operating Instructions,
giving details of Object, Theory, Design procedures,
Report Suggestions and Book References.
ANTENNAS ACCESSORIES
Transmitting Antennas Type AT -1001- ........
01. Simple Dipole l / 2
02. Simple Dipole l / 4
03. Simple Dipole Antenna 3/2l
04. Folded Dipole
05. Yagi UDA Folded Dipole (3 E)
06. Yagi UDA Simple Dipole (5 E)
07. Yagi UDA Simple (7 E)
ANTENNA TRAINER
OMEGA TYPE AT - 1001
08. Yagi UDA Folded Dipole (5 E)
09. Hertz Antenna (Horigental end Fed)
10. Ground Plane Antenna
11. Slot Antenna l / 2
12. Loop Antenna
13. Rhombus Antenna
14. Helix Antenna
15. Phase Array l/2 Antenna
16. Phase Array l/4 Antenna
17. Broad Side Array
18. Combined Collinear Array
19. Log Periodic Antenna
20. Simple Dipole Cut Paraboloid Antenna
21. Zeppline Antenna (Horigental end Fed)
OTHER ACCESSORIES
01. Current Probe comprising of two PCBs
Connected by Shielded Cable.
02. Transmitter Mast
03. Detector Antenna:(Folded dipole with reflector)
04. BNC-Tee
05. BNC-BNC adapter M
06. BNC-BNC adapter F
07. BNC-BNC cable-18"
08. Operating Manual & workbook
09. Accessories case
10. Patch Cord
11. Polar Graphs( 25 Nos.)
12. Polar Graphs (For Normalised Reading)(25 Nos.)
13. Allen key
14. Aligner Taparia 911( Duly filed )
15. Text Book "Antennas"

110 kgs

Application : Radio-frequency reader antenna, used for terminals, parking lots, shopping malls, toll station.
Characteristic: Pleasing in appearance, environmental adaptability, easy installation fast

Model:D900B0860K
Frequency Range (MHz):902-928
Bandwidth (MHz):26
Gain(dBi):8
Beamwidth E-Plane(íp):68
Beam Width H-Plane(íp):68
VSWR:í_1.4
Polarization:Circular polarization
Max Power(W):100
Impedance(ª+):50
F/B (dB):>25
Connector:N-female/SMA/User specified
Weight(kg):1.6
Dimensions(mm):225*225*30
Radome Material:ABS



The antenna are usually packed by protecting bags(sponges),and then use the cartons.

Application : Radio-frequency reader antenna, used for terminals, parking lots, shopping malls, toll station.
Characteristic: Pleasing in appearance, environmental adaptability, easy installation fast

Model:D900B0860K
Frequency Range (MHz):865-868
Bandwidth (MHz):23
Gain(dBi):8
Beam Width E-Plane(íp) 68
Beam Width H-Plane(íp):68
VSWR:í_1.4
Polarization:Circular polarization
Max Power(W):100
Impedance(ª+):50
F/B (dB):>25
Connector:N-female/SMA/User specified
Weight(kg):1.6
Dimensions(mm):225í-225í-30
Radome Material:ABS


The antenna are usually packed by protecting bags(sponge),and then use cartons.

9dbi gains
Frequency range : 700-2600 mhz
Vswr< 1.5 : 1 max
Impedance :50 ohm
Polarization linear vertical
Weight:230g
Omnidirectional antenna
Polarization vertical
Diameter: 13.5mm
With 3 meter cable
Antenna connector: crc9 male right angle as default, sma/ssmb/ts9/ms-147/mc-card/mcx/fme/bnc/tnc..And so on , please give us notes if the connector is chosen !
Colour: black
Mounting:magnetic base
Cable: rg174
Working temperature : -20~+55 deg c

Product description
Want to gain an adjustable jammer device that can block the signals of cell phone, wifi, 3g and uhf at the same time? then just go ahead and look at this adjustable 15w high power 6 antenna cell phone, 3g, gps l1, l2, l5 jammer, then you goal can be easily reached.

A big advantage of this jammer is that you can adjust the power of the frequency bands according to your requirements. Besides the jamming frequency bands of this jammer are wide, and the detail information is as follows. This jammer can cut off the signals of gsm 790 mhz-825 mhz, gsm 925-960 mhz, -dcs/pcs 1805-1990mhz, wifi2.4g 2400mhz-2485mhz, 3g 2110-2170mhz and uhf 400mhz-470mhz. And with the design of the adjustable 15w output power the jamming range of this jammer is up to 40 meters depending on the signal strength in the given area.

Are you looking for one and want to gain one? just come here and add one to your cart, then this high quality jammer will belong to you at the best price.

Specifications:

Affected frequency ranges:
-gsm: 790-825mhz
-gsm: 925-960mhz
-dcs/pcs: 1805-1990mhz
-3g: 2110-2170mhz
-gps l1: 1570-1580mhz
-gps l2, l5: 1170-1230mhz

Total output power:15 watt
Power supply: ac adapter (ac220v-dc12v)
Shielding radius:up to 40 meters@-75dbm (depend on the signal strength in given area.)
Weight: 3.5kg/pcs
Accessories:

Jammer
Ac adaptor
Car adaptor
Antennas

Direction
1) Full speed USB interface, compliant with USB 1.1
2) Bluetooth version 1.2/2.0 compliant, Bluetooth qualified
3) Complete 2.4GHz radio transceiver and base band
4) Bluetooth class 2 operation (up to 10m range)
5) High performance surface mount antenna
6) Supports Windows 98, 98SE, Me, 2000, XP

Blister packing

This Bluetooth Headset use rechargeable battery. You can recharge it easily from power adapter. Our Bluetooth handset has less than 1/100 electromagnetic wave of cellular phone. You can prevent enormous electromagnetic wave from using cellular phone directly.


Blister packing

Wireless Mini Bluetooth Speaker Style 3

Many Colors and Many Designs Patterns
Connect Bluetooth devices or use Micro SD Card to play music
MOQ 20pcs/each color each pattern

Welcome to order, Contact for details.