Product Name: T-Code 7.2 T300
Part No.: CCT300
Net Weight: Net Weight: 3.5KG
Functions
Use for key programming. More cars than any other transponder machine .
1- Philips Crypto:copy 40(some until 2002), 41, 42, 44 (VAG UNLOCK), 45, Texas Crypto:4D crypto(60,61,62,63,64,65,67) transponder
2- Texas Fixed:Copy 4C transponders on to JMA 4C batteryless TPX1 glass transponders
3- Untill now 53 eeprom applications in order to calculate pin codes and transponders which can directly start the car,for example; fiat code2, volvo, bmw(EWS1,EWS2,EWS3), mercedes,
mitsubishi, renault, peugeot,fiat system1, honda and many many more
4-Finding pin code from customer key for 45 peugeot and 33 renault.
5-Reading mileage, vin number, key number from original BMW key and writing onto original remote key for EWS1,EWS2,EWS3 systems.
6- Upgradable via USB connection
7- Save all crypto and fixed transponder datas on PC software in order to re-use them in future
8- Availability to produce your own transponders from original blank transponders, 40, 41, 42, 44 VAG, 44 Mitsubishi, 45, 46 Renault, Chrysler, chevrolet, mitsubishi, bmw, peugeot, citroen, hyundai, 61, 62, 65, 73 transponders by using PCF7935, PCF7936, Texas 60 carbon transponders which you can use directly with diagnostic tools.
9- We are going to add many more eeprom applications on the device.
10-VAG pin code application including K-Line and Can systems through OBD will be added to the device very soon.
Prices are as below:
Detailed information: Eeprom application and transponder production applications have token system, which will be decreased with each application.
Each token costs 0,35 Euro which is a reasonable price for users.
Clonning Transponder does not require token, it is standart for all Zed-BULLs,
Note:For Eeprom & MCU applications user will need external IC programmer.
The new mercedes device working with smart key (old and new) using in car since 1997 up to 2005 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.
You read and program eeprom of cpu from steering blocking module via diagnostic connector.
Desolder and read via programmer two cpu from electronic ignition control module.
Load theese eeproms to program.
Desolder nec cpu from the key.
Soldering it on the device , select the no of key and program it.
Solder all cpu on their places and start the car.
You can program new keys without the car - only with eis and steering blocking module.
You can read theese cpu with help etl programmer for motorolla cpu 68hc705x16(32).
Sbb is a new device used as a portable unit for programming keys in immobilizer units on vehicles.
Due to its integrated hardware sbb needs no more than the obdii cable provided to carry out a wide range of functions:
Programming new keys
Reading keys from immobilizer's memory
Deactivating keys no longer in the car owner's possession
Operation by means of a menu guided programming
Programming new remote controls
Software with full database containing all the most important vehicle makes
Ps 300 auto key programmer is a handheld device for programming keys in immobilizer units on vehicles. This scan tool has a simple and robust design to provide you with better vehicle service!
7. Reset ecu& reset immobilizer
8. Easy to operate by the guided menu
9. New remote controller programming
10. Full and strong database for the most vehicles makes
11. Upgradeable via internet
Language: english
Spanish version will be released in the market.
GT1 is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series.
Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface.
GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECU's to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year.
BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and management system . you can to test and check data information same time in GT1.
Test function :
Read faulty code , clear faulty code , data stream. Activate state, programming , component test , maintenance data information , components location , wiring diagram etc..., tis and dis are supply all of system diagram of all of bmw car, components location, maintenance method and coding information etc. Can do completely of BMW car system.
1. GT1-SCAN Pro main body
2. Network cable
3. GT1 for vehicles with 20pin diagnostic connector
4. GT1 for vehicles with OBII diagnostic connector
5. Latest diagnostic version of software(one HDD).
OBDBook is brought forward by LAUNCH. It is one of the latest portable series scanner for the car user to check his/her car's status OBDBook keeps and enhances functions of its previous generations-Creader.
The screen is larger.
Its book shape design is more accordable with Ergonomics for hand hold convenient. 5 keys make operation easy and rapid.
Product character
1. Smart appearance, book shape design, hand hold convenience.
2. New large screen, both DTC and its definition are displayed for user.
3. 5 function keys make it easy to operate.
4. Update via the Internet, cover the latest cars.
5. Perfect after service system satisfies customers in whole product life
Product parameter
Working temperature range:-20f+70fª
Input voltage range:9f+25V
Input current: less than 200mA
Display: double 160*160
Support OBDII&EOBD protocols: SAE J1850 VPWf=SAE J1850 PWMf=ISO 9141f=ISO 14230(KWP2000)f=ISO 15765 (CAN)
Product Features & Functions
Troubleshoots engine, ABS, transmission and airbags codes
Global OBDII/EOBD coverage(US, Asian & European)
Powered by Uni-SCAN technology with no adapters to buy
Supports all nine test modes of the latest J1979 OBD II test specs
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Displays DTC definitions on unit screen
Views freeze frame data
Displays O2 sensor data as well as live datastream parameters
Data graphing +C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports all current OBD-II protocols, including CAN (Controller Area Network)
Extremely easy to use and highly reliable
Trilingual supportf+English, Spanish, French or other combinations
Software upgradeable via the internet
Built-in OBD-II DTC lookup library
Prints data via PC.
Vehicle coverage
American vehicles including CAN-BUS.
GM 1984-2006
Ford 1984-2006
Chrysler 1988-2006.
MaxScan GS500 this is an extended GS400 with the ability to display live engine data.
The new generation of automotive code readers that support Controller Area Network(CAN)protocol has arrived. The
MaxScan GS500 CAN OBD2 / EOBD auto scanner supports all OBD2 protocols, including the newly released Controller Area Network(CAN) protocol, allowing users to keep up with the latest development in automotive diagnostic scanning.
An essential piece of kit for all car and van owners; save time and money with this hand held code reader that enables
you to troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC) that appear when the
"check engine" light is showing.
DTCs are codes that are stored by the car's in-board computer system (ECU) in response to either a mechanical or
Electrical vehicle issue. Codes relate to a particular problem and are made up of a 5 digit alpha-numeric sequence and are used as a guide to help locate the fault in order for you to fix the vehicle.
If you have got a connector in your car that looks like this: Then the chances are that this code reader will work for you!
Additionally, this scanner has CAN Protocol Support which gives wider vehicle coverage. It resets the check engine light, reads and clears all generic, and some manufacturer specific DTCs, displays the I/M readiness status, views
OBD II freeze frame data, displays pending codes, retrieves vehicle information (VIN) [on supported vehicles], and determines the status of the malfunction indicator (MIL) lamp.
Unlike earlier versions, the GS500 displays the DTC definitions on the backlit and easy-to-read screen. This is the latest MaxScan OBDII scanner and totally out-performs all previous models.
Help prevent costly future engine trouble and identify problems when buying or selling a used vehicle with the GS500 scan tool.
Protocols:
- Works on any Universal OBD2 or EOBD Vehicle.
- Supports ISO, VPW and PWM bus systems as well as can bus systems
- U.S. Models - European - Japanese - Asian - German - Korean:
- Suitable for almost all US cars after 1996 - European cars after 2000.
The emulator of an immobilizer for motorcycles and scooters yamaha.
Works with all motorcycles and scooters yamaha from 2006 to 2009.
Does not demand programmingonly need is connect wires.
Completely emulates work of a regular immobilizer, including light-emitting diode work on the instrument panel.
For emulator installation in the case of a regular immobilizer:
1. Remove glue hermetic from the immobilizer case.
2. Take out a pcb from immobilizer and desolder from it wires.
3. Connect the emulator according to drawing more low.
4. Insert the emulator into the immobilizer case.
Colouring of wires and their appointment:
Black (2 pcs.) gnd
Red batt (+12v)
Yellow ign (+12v)
Gray led (+5v)
Blue k-line immo-ecu
Renault+Nissan key prog 2-in-1£¬allow you to add a blank key or card for many of NEW Renault and Nissan cars via OBD-2 socket. You DO NOT NEED any PIN code! Software would program keys/cards AUTOMATICALLY. it is for Renault and Nissan based vehicles using HITAG-2 keys/cards - with the 12 character pincode.
Nissan Motor Co., Ltd., has developed the CONSULT-III, a handheld diagnostic tester for various in-vehicle electronic systems, with the aim of realizing swift and accurate diagnosis and repairs at Nissan dealerships worldwide. The diagnostic tester will be introduced at Nissan dealerships in Japan and other global markets. The roll-out of the new system will coincide with the introduction of the Skyline sedan in Japan this month, and global markets where the Infiniti G35 will be sold, followed progressively by all other remaining markets as new generation products are introduced.
The accurate and speedy diagnosis of a vehicles problem has become increasingly complicated as more sophisticated electronic hardware is fitted in vehicles, combined with a significant increase in the number of computers connected to the Controller Area Network (CAN). In the past five-year period, the number of computer systems fitted in todays vehicles has doubled from only approximately eight in 2001. The CONSULT-III is specifically designed to address these complex and advanced in-vehicle electronic devices, enabling accurate diagnosis and repairs and shortening waiting times for customers.
The basic diagnostic system is composed of the main unit i.e. an extra-durable and rugged laptop PC, a wireless vehicle communication interface and wireless measurement interface; the laptop PC and each interface is connected via Bluetooth technology. Through a wireless LAN, this diagnostic system can be connected to the Nissan network in Japan, enabling the dealerships to retrieve information from various sources and display service technology data on the laptop PC.
Features of CONSULT-III:
1.Swift diagnosis and swift repairs through automated operations:
The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.
2.Automated Self-Diagnostics:
The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.
3.Increased efficiency in operations based on wireless technology:
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either (*2) inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle?s maintenance history on the laptop PC.
4.Capable of handling multiple complex defects:
The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.
5.Enhanced data management with improved laptop PC:
New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management.
6.Map data update function for hard-disk navigation system:
Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.
Package including:
1. Nissan Consult3 Interface
2. USB cable
3. Nissan sepcial cable for old Nissan
4. AC adapter
5. Software CD
6. Bluetooth USB Adapter.
Product name: x-431 tool ( color, infinite )
Part no.: a107
Net weight: 15kg
X431 tool is a vehicle diagnostic device with color screen display and bluetooth technology for garages especially designed by launch. It features in anti-oil stain, anti-dust and it's shakeproof. Cabinet type with delamination design and unattached box can enhance usage efficiency greatly. It can directly be charged through the bottom interface of tool cabinet this device materializes humanization and it will be a good assistant for garages.
Description:
The most powerful scan tool to make vehicle service easy
Wide coverage--cover almost all the vehicle models in the world;
Keep abreast with the latest models--accurate test, fast upgrade anywhere in the world;
Best diagnostic scanner for benz and bmw--148 benz systems and coverage on 7 series bmw vehicles
The best cost effectiveness--leadership from professionalism
Best hardware--rewritable compact flash card, huge memory and mini printer
Easy upgrade--easy, professional and effective upgrade via the internet
Advanced technology--stable performance showing advantages over similar scanners
Largest r&d team--150 engineers engaged in r&d
The largest r&d team working in r&d centers in german, australia and japan
Reliable technology--already providing original equipment for over 20 vehicle manufacturers in the world
First to release can bus adaptors
Market-leading can bus adaptors
ân
Product name: x-431 tool ( color, infinite )
Part no.: a107
Net weight: 15kg
Product name: honda gna600
Part no.: a122
Net weight: 2.5kg
Honda gna600 interface module kit works with the oem-honda diagnostic pc software (hds). This is the replacement for the previous dealer tool honda him. It can diagnose all honda and acura vehicle systems on models from 1992 to present year.
Specification:
Honda gna600 comes with the latest software to access immobilizer, reprogram key and install new or used pcm's functions. Full access to all systems using the only guaranteed accurate data available. This kit will also give you access to the latest reflash software for pcm updates. This software also includes a scan tool with obd2 access to all other cars 1996 on.
Gna600 kit includes:
Gna600 vehicle communication module
16 pin obd2 cable
Usb/ethernet link cable
Latest version of software
Product name: honda gna600
Part no.: a122
Net weight: 2.5kg
Product name: star auto scanner
Part no.: a111
Net weight: 12kg
As modern vehicle computer-controlled systems are becoming more and more sophisticated, correctly identifying the problems in different makes of vehicles is becoming more and more challenging, especially when computer-controlled systems from one manufacturer may be different from the others. Moreover, in order for today's automotive service professionals to survive, a timely diagnostics is very critical. Keeping these two objectives in mind, star auto scanner can fulfils the needs of our independent service technicians by providing full access of oem-level diagnostic information for european and asian vehicles. Star will allow your business to expand by providing timely diagnosis of a broad range of systems for the most popular foreign cars, including mercedes- benz, bmw, volkswagen, audi, honda, toyota, nissan, mitsubishi, mazda, gm and many more. All in one package, star will bring your diagnostics experience to the next level.
Star software upgrades ensure that your star auto scanner is always at its best. Our experienced and dedicated staff will support your technicians and offer advice and information to help resolve the most demanding vehicle diagnostic problems.
The star diagnostic provides full access for automotive repair at the oem level.
-full component activation.
-setting of adaption values.
-coding of the new control modules.
-read & change ecu coding.
Product name: star auto scanner
Part no.: a111
Net weight: 12kg
Product name: renault can clip diagnostic interface
Part no.: a110
Net weight: 3.5kg
Description:
Clip's main menu allows you to:
ò see all the information relating to the vehicle
ò look at the function you want to use:- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (obd tests)
- base doc (access to technical notes)
- physical measurements
- antipollution
- multimeter
Renault can clip set includes :
ò can clip interface
ò 2 cables for can clip <-> car connection
ò 1 cable for can clip <-> pc connection
ò 1 software cd (clip v85, can be installed on any pc)
It's very simple to diagnose a vehicle using renault can clip diagnostic interface: just select the vehicle make, enter the v.I.N. And press enter.
Product name: renault can clip diagnostic interface
Part no.: a110
Net weight: 3.5kg
Features:
Tacho V2009 is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho V2009.
Specifications:
Outstanding characteristics of our programming system are:
1.The current odometer reading is decoded and shown in the LCD display
2.Easy self explanitory operation by clear menu guidance
3.Backlit display makes working possible in overcast conditions
4.All datasets can be edited, saved and loaded
5.The stored data can be transferred to a PC for archiving
6.Up to 200 files can be stored in the Tacho Universal
7.Broken speedometers can be repaired comfortably.
ML BENZ Key Programmer Device and Software for the models ML from 1998 to 2004 with the metal key(not the plastic electronic key).The Device can program two new key when all keys lost.The programmer is done via the diagnostic plug OBDII and takes 8-10 seconds.
