SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it is suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, TV, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation.
10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation.
10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Product Introduction
SANDI Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
5, The output voltage can be set between -40 % to +20 % of rated voltage.
6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7, Output AC Power is suitable for all types of electrical equipment.
8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Removing dead skin cells is very important for healthy looking skin, and the process is to reveal the newer smoother skin underneath.
The spatula can effectively removes dead skin cells and clean the pores, so its good for all skin types, imperatively for oily to combination skin; and it is suitable for sensitive and rosacea skin. The spatula could be beneficial to acne skin as it will push everything to the surface, be sure to use distilled water while treating acne with the spatula. (spray the distilled water to the treated area, then run Ultrasound Skin Spatula over it).
Another great thing about our Ultrasonic Facial Skin Spatula is that it can help water-soluble skincare products (gels, serum, ampoules) to penetrate to the skin. Keeping our skin hydrated is essential, especially for those of you who travel a lot, from one climate to another sometimes can confuse our skin. People who live in a dry climate might be easier to adapt the changes. But for someone lives in humid climate and switch to a dry environment can really challenge his/her skin. By using Ultrasonic Facial Skin Spatula, we can easily keep our skin hydrated while on the go.
Remarkable Features
Skin cleaning and dispel dead skin and skin dregs.
Able to remove dirt within pores and aging cuticle.
Improve skin quality for better lift-up, whitening and health.
Nutrition penetration, Toxins and wrinkle removal.
Repair body cells, speed up absorption of skin-care products.
Painless, cleanliness, and deep skin cleansing.
Decompose melanin, disinfect pimples and various skin problems.
Shrinking skin pores to give glossy, shiny, white and healthy skin.
Take away wrinkles and loosen skin.
Skin Massage with ion penetration to keep smooth and ageless skin.
Intelligent time control for each ten minutes treatment.
Compact and portable design with low power consumption.
A cordless device for convenient use.
Specifications
INPUT VOLTAGE : AC 90 !V 240V
OUTPUT VOLTAGE : DC 5V 500mA
Li-ion 3.7V 560 mAh
MAXIMUM OPERATING CURRENT : 600mA
OUTRASONIC OUTPUT FREQUENCY : 25KHz
NET WEIGHT : 140g
SIZE : 220 X 84 X 30 mm (8.65 X 3.3 X 1.1 inch)
1.Support 1pcs HDD and 2pcs SD card.if HDD with problem,it will change to recorder in SD card automatically.
2.Support 1ch audio, 4ch input and 1ch output, 1ch CVBS ,video output(ADPCM),voice and image synchronously recording
4CHS MDVR System include following Part :
4CHS DVR MS-580
7" TFT monitor MS-708
4pcs CCD cameras. MS-750/MS-770/MS-780
Extension Cables for camera
500GB HDD(extra part )
64GB SD Card (extra part)
HDD Data Transfer box (only choose GPS function ,necessary part)
Remote , Power cable & Disc for free part.
SPECIFICATIONS:
Environmental
Temperature
Operating : 25 to 65 C ( 13 to 149 F)
Storage : 40 to 85 C ( 40 to 185 F)
Humidity
Operating : 0 to 90% non-condensing
Storage : 0 to 95% non-condensing
Approvals
Conformity : CE marking, European Union (EU) declaration of conformity.
EAC marking, Eurasian Customs Union (EACU) certificate/
declaration of conformity.
Electromagnetic compatibility : EN 61000-6-2.
EN 61000-6-4.
EN 61326-3-1.
TR CU 020/2011.
Electrical safety : EN 61010-1.
TR CU 004/2011.
Vibration : IEC 60255-21-1 (Class 2)
Hope anyone enquire from us,
1. lower your support costs
2, Provide on-going availability of automation replacement parts
Quantity available: 1
Warranty: 12 months.
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx and EMS.
Technical specification, manuals and data sheets
Salient Features
Special linear weigher control with load cell & stepper motors
Operator friendly PLC controller with a user friendly GUI
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with brake system.
Independent drives for sealing ,Feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Bag Unwinding by Lanatex belt drive through servo motors and control cards
Flexible vertical seal jaw positioning to offer range of variable pack with offering
Quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC controlled via servo motors and control cards
Linear weighing system for accurate dosing
Independent temperature controller for both seal
Jaw's security devise to protect the operator of the machine
Electric Panel IP-54 Protection Standard
Machine Packaging Capabilities
Potato Chips, Snacks, Rice, Macaroni, Beans, Pasta, Dry Fruits, Pasta, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight products.
Technical Specifications
Output Quantity: 50 g 2000 g
Output: 20-55 bags/min
Filler Accuracy: ± 5 gm
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 355 mm x 500 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns
Film Reel: Core dia 76 mm & Reel diameter 300 mm max
Electrical Requirement:
Input Supply: 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 5.5 KVA
Peak Power Rating: 5 KW
Air Requirement:
Air Pressure: 6 bar constant dry air
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg
Weight: 600 kgs (Net)
Optional Accessories
Customised pack Size
Photo mark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Product discharge conveyor
Date Coding System
Extra Pneumatic Magazine Shaft
Optional Film End Sensor
UV Sterilisation of packaging film
Special impulse sealing jaw
Bucket elevator â?¢ Platform
English Folding System
Extra Conformer for different sizes
Air release system
Linear weigher
Salient Features
Special multi head weigher control with load cell & stepper motor
Operator friendly PLC controller with a user friendly GUI
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with brake system.
Independent drives for sealing ,Feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Bag Unwinding by Lanatex belt drive-through servo motors and control cards
Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC controlled via servo motors and control cards
Multi head weighing system for accurate dosing.
Independent temperature controller for both seal
Jaw's security devise to protect the operator of a machine
Electric Panel IP-54 Protection Standard.
Machine Packaging Capabilities
Potato Chips, Rice, Macaroni, Beans, Snacks Pasta, Dry Fruits, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight of products.
Technical Specifications
Output Quantity:
15 g - 1000 g
30 - 85 Packs/min
Filler Accuracy: ± 5 gm to 5 g
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 225 mm x 350 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 40 to 120 microns
Film Reel: Core Diameter 76 mm & Reel Diameter 300 mm max
Electrical Requirement:
Input Supply: 220 or 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 3.5 KVA
Peak Power Rating: 3 KW
Air Requirement:
Air Pressure: 6 bar constant dry air
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2438 mm
Weight: 700 kgs (Net)
Optional Accessories
Customised pack Size
Photomark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Product discharge conveyor
Date Coding System
Extra Pneumatic Magazine Shaft
Optional Film End Sensor
UV sterilisation of packaging film
Special impulse sealing jaw
Bucket elevator
Platform
English Folding System
Extra Conformer for different sizes
Air release system
Linear weigher
Salient Features
Advance augur dozing system control with special servo motor
Operator friendly PLC controller
Independent augur system with adjustable height.
Special scoop conveyer for automatic hopper filling
Special hopper with agitator control with level sensor
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with servo motor and control cards.
Independent drives for sealing, feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Bag Unwinding by Lanatex belt drive through servo motors
Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC through servo motor and control cards
Independent dozing system
Independent temperature controller for both seal
Centralised lubrication system
Jaw's security devise to protect the operator of machine
Electric Panel IP-54 Protection Standard.
Machine Packaging Capabilities
Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, as well as all kinds of powder products.
Technical Specifications
Output Quantity:
100 g - 1000 g
1000 g/5000g
Outpt:
20 - 75 Bags/min
15 - 30 Packs/min
Filler Accuracy: ± 5 gm
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 355 mm x 500 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns
Electrical Requirement:
Input Supply: 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 7.2 KVA
Peak Power Rating: 6.48 KW
Air Requirement:
Air Pressure: 6 bar
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg
Weight: 600 kgs (Net)
Optional Accessories
Customised pack Size
Photomark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Conveyor
Date Coding System
Extra Magazine Shaft
Optional Film End Sensor
UV sterilisation of packaging film
Programmer cam switch controller
Special thermic sealing jaw
Impulse jaw
Volumetric dozing system
Platform
English Folding System
Extra Conformer for different sizes
Air release system
Salient Features
Special volumetric cup dozing system control by special gear motor
Operator friendly PLC controller with a user friendly GUI
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with brake system.
Independent drives for sealing ,Feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine.
Bag Unwinding by Lanatex belt drive through gear and servo motors
Flexible vertical seal jaw positioning to offer range of variable pack with offering
quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC and servo motor and control cards
Independent dozing system
Independent temperature controller for both seal
Centralized lubrication system
Jaw's security devise to protect the operator of machine
Film end sensor
Electric Panel IP-54 Protection Standard.
Machine Packaging Capabilities
Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products.
Technical Specifications
Output Quantity: 1000 g -5000 g
Output: 12-40 Packs/min
Filler Accuracy: ± 5 gm
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 355 mm x 500 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns
Film Reel: Core dia 76 mm & Reel diameter 300 mm max
Electrical Requirement:
Input Supply: 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 5.5 KVA
Peak Power Rating: 5 KW
Air Requirement:
Air Pressure: 6 bar constant dry air
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg
Weight: 600 kgs (Net)
Optional Accessories
Customised pack Size
Photo mark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Product discharge conveyor
Date Coding System
Extra Magazine Shaft
Programmer cam switch controller
Impulse jaw
Platform
English Folding System
Bucket Elevator
Extra Dosing cup
Extra Conformer for different sizes
Air release system
Special Weighing System
Salient Features
Special volumetric cup dozing system control by special gear motor
Operator friendly PLC controller with a user friendly GUI
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with brake system.
Independent drives for sealing, Feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Bag Unwinding by Lanatex belt drive through gear and servo motors
Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC and servo motor and control cards
Independent dozing system
Independent temperature
controller for both seal
Centralized lubrication system
Jaw's security devise to protect the operator of machine
Film end sensor
Electric Panel IP-54 Protection Standard.
Machine Packaging Capabilities
Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products.
Technical Specifications
Output Quantity:
50 g - 2000 g
20 - 55 Bags/min
Filler Accuracy: ± 5 gm
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 355 mm x 500 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns
Film Reel: Core Diameter 76 mm & Reel Diameter 300 max
Electrical Requirement:
Input Supply: 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 5.5 KVA
Peak Power Rating: 5 KW
Air Requirement:
Air Pressure: 6 bar constant dry air
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg
Weight: 600 kgs (Net)
Optional Accessories
Customised pack Size
Photomark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Product discharge conveyor
Date Coding System
Extra Magazine Shaft
Programmer cam switch controller
Impulse jaw
Platform
English Folding System
Bucket Elevator
Extra Dosing cup
Extra Conformer for different sizes
Air release system
Special Weighing System
Video input: 4 channel video signal
Audio input: 4 channel audio signal
Video standard system: pal/ntsc
Video compression: h.264 baseline profile
Preview resolution: 704*288/352*288/320*240
Compression resolution: 352*288/320*240
Preview frame rate: real-time 25fps in pal; 30fps in ntsc
Compression frame rate: 1-25fps adjustable
Bit-stream output: 45kbps~2mbps adjustable
Video sampling: 10 bit
Audio sampling: 10 bit
Power: less than 2watt
1. Compatible with other access control system.
2. With standard wiegand output signal .
3. With oled display , buzzer and led lights
4. Built-in watch dog funtion
5. Oled display is programmable , allows users to edit the text via 2 different input interfaces .
6. Built-in buzzer for sound indicator , the length and times of the sound are programmable .
7. Suitable for the parking system when the rf siganl was cuted off .
8. Built -in perpetual calendar , can be set on the card reader directly.
9. Built-in doorbell button .
Dimension: 95, 95, 21, mm operating voltage: dc9-15v
Consume power: less than 1 w operating current : 120 ma
Card type : 125khz em id card read range: 60(mm)
Output format : wg26/wg34 cable distance : 150m
Tranmit rate : 1bit/ms reading tips : buzzer / oled display
Keypad output :4bits/8bits weight: 115g
Color:white/black material : pc +ab, lens: pmma
Operating temp: -30íµ +65íµ
Compatible With Universal Serial Bus Specification ver2.0 And Also Backward Compatible With USB1.1
USB 2.0 transfer rate up to 480Mbps ,backward USB 1.1 transfer up to 12Mbps
Data copying between cards without storage intermediate,and it also allows you to upload photos/data from compatible media cards to a computerí»s hard driver
Four media slot can be used at the same for data exchanges.
Low power consumption.
Support Firewire (IEEE 1394)
With Sata and Sata power Port
Support the HD Audio input/output
It is compatible with WinME,Windows 2000 and Windows XP, Win Vista operating system,it is also compatible with Mac OS 9.2 or higher operating system
