Find Verified Automotive Diesel Fuel Suppliers, Manufacturers and Wholesalers

EN 590 Diesel is a European-standard automotive diesel fuel designed for modern compression-ignition engines. The commonly traded EN 590 10 ppm grade is ultra-low-sulfur diesel with sulfur at or below 10 mg/kg (10 ppm). It is used in passenger cars, trucks, buses, generators, construction equipment and other diesel-powered machinery

Biodiesel/FAME : Depending on grade/contract; specify B0 or permitted FAME content
Appearance : Clear, bright petroleum distillate
Cold-flow properties : According to applicable EN 590 climatic class
Standard : EN 590
Typical use : Automotive, commercial, industrial diesel engines

High-quality automotive diesel fuel manufactured to the EN 590 specification, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). Designed for modern compression-ignition diesel engines.

Applications & ComplianceEmissions Support: Compatible with Euro 5 and Euro 6 engines using advanced after-treatment like DPF (Diesel Particulate Filters) and SCR (Selective Catalytic Reduction).Common Uses: Passenger cars, heavy-duty commercial fleets, buses, agricultural machinery, and industrial logistics

EN590 diesel is a low-sulfur automotive diesel fuel formulated for compression-ignition diesel engines. It is widely used in passenger vehicles, trucks, buses, generators, agricultural machinery and heavy equipment.

Cetane Number : Minimum 51
Cetane Index : Minimum 46
Density @ 15C : 820 - 845 kg/m
Sulfur Content Maximum : 10 mg/kg (10 ppm)
Flash Point : Minimum 55C

Automotive Diesel Fuel EN590 of Netherlands origin.
Available monthly quantity ranges from 10,000 MT up to 100,000 MT.

Delivery is FOB from approved loading ports including Rotterdam, Houston and Fujairah.

Pricing is $580 Gross / $675 Net per MT.
Commission structure: USD 5.00 seller side + USD 5.00 buyer side per MT.
Quality is export standard, supported by full POP documentation including SGS Q&Q, Product Passport, Injection Report, ATSCC, ATV, and DTA depending on procedure.

Suitable for international buyers requiring verified EN590 diesel with standard FOB petroleum procedures.

Product Grade

Automotive Diesel / EN 590

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Automotive Diesel is a refined fuel designed for use in diesel-powered vehicles and transportation equipment. It is suitable for commercial vehicles, passenger vehicles, heavy-duty trucks, buses, and compatible diesel engines. The product can be supplied in bulk for international B2B requirements, subject to agreed specifications, quantity, availability, inspection, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

AUTO-DIESEL

Product Standards

EN 590 / Applicable Automotive Diesel Specification

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: As per applicable diesel fuel specification

Key Specifications 2

Cetane Number: As per agreed product specification

Key Specifications 3

Density, flash point, distillation characteristics, lubricity, and water content according to the applicable product specification.

Key Specifications 4

Suitable for passenger vehicles, commercial trucks, buses, heavy-duty vehicles, generators, and other compatible diesel engines.

Key Advantage 1

Suitable for a wide range of diesel-powered automotive and commercial applications.

Key Advantage 2

Designed to provide reliable fuel performance for transportation and heavy-duty operations.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk B2B supply with flexible quantity, delivery, inspection, and international shipping arrangements.

Diesel D2

Diesel D2 -Specifications
Parameter : Typical Specification
Product : Diesel D2 / Automotive Diesel Fuel
Fuel Type : Middle Distillate Petroleum Fuel
Appearance : Clear to slightly yellow liquid
Sulfur Content : As per applicable grade/specification
Cetane Number : Typically 45+

Diesel D2 - Advantages
High energy content: Provides efficient energy for diesel engines and industrial equipment.
Reliable performance: Designed for consistent combustion and engine operation when meeting the applicable fuel standard.
Wide industrial use: Suitable for transportation, generators, agricultural machinery, and industrial equipment.
Good storage stability: Quality-compliant diesel can be stored and handled under appropriate conditions.
Efficient combustion: Properly specified fuel supports smooth engine operation and fuel efficiency.
Internationally traded product: Commonly supplied in bulk for commercial and industrial requirements.

Diesel EN590 is a premium ultra-low sulfur automotive diesel fuel manufactured in accordance with European EN590 specifications. It is designed to provide efficient combustion, lower emissions, improved engine performance, and compatibility with modern diesel engines. Sulfur content is maintained at a maximum of 10 ppm to meet international environmental standards. Suitable for automotive, industrial, transportation, and commercial applications. Available for bulk export shipments with flexible packaging and logistics arrangements.

a. Name of Product: EN 590 Diesel Fuel
b. Product Grade: EN 590 (Automotive Diesel Fuel-Ultra Low Sulfur Diesel)
c. Minimum Price (USD): USD 550 per MT (indicative, subject to market fluctuation)
d. Maximum Price (USD): USD 850 per MT (indicative, subject to market fluctuation)
e. Price Units: USD per Metric Ton (MT) / USD per Liter (as agreed)
f. Incoterms: FOB, CIF, CFR, DAP, DDP (as per buyer's seller agreement)
g. Product Origin: Europe / Russia / Kazakhstan / Middle East (Non-sanctioned origin as applicable)
h. Key Specifications / Special Features:
Sulfur Content: 10 ppm
Cetane Number: Min 51
Density @15C: 820-845 kg/m3
Flash Point: Min 55C
Complies fully with EN 590 European Standards
Suitable for modern diesel engines
Low emissions & high fuel efficiency
i. Harmonized System (HS) Code: 2710.19
j. Minimum Order Size: 10,000 MT (Bulk shipment)
(Smaller quantities negotiable depending on supply terms)
k. Packaging Details: Bulk shipment via tanker vessel
Storage in terminal tanks
Delivery via tanker trucks (for local distribution)

Trial Quantity: 20,000 MT (Metric Tons)
Maximum Quantity: 100,000 MT per Month

Kazakhstan Diesel Fuel D6 - Advantages

If you mean D6 diesel fuel / residual fuel oil marketed from Kazakhstan, the exact specification should be confirmed from the supplier's refinery certificate because "D6" is not a universal diesel-fuel grade.

Industrial fuel application: Suitable for industrial boilers, furnaces, generators, and other approved heavy-fuel applications, depending on the actual specification.
Bulk supply: Commonly traded in large volumes for industrial and energy-sector buyers.
Energy-dense fuel: Heavy petroleum fuel provides substantial energy output for suitable combustion equipment.
Export suitability: Can be supplied in bulk by vessel, rail, or other approved logistics channels depending on origin and destination.
Specification flexibility: Commercial parameters can be agreed according to buyer requirements, including viscosity, sulfur, density, water, ash, and flash point.
Suitable for industrial operations: Primarily intended for equipment designed to handle residual/heavy fuel rather than standard passenger-car diesel.

Premium automotive gas oil suitable for commercial vehicles, generators, and industrial machinery requiring reliable and efficient fuel solutions.

EN590 Diesel 50 PPM is a high-quality automotive diesel fuel designed to meet international performance standards. With a sulfur content of up to 50 parts per million (PPM), it offers reliable engine performance, efficient combustion, and dependable operation for commercial vehicles, industrial machinery, transportation fleets, and power generation applications.

Standard Transaction Process:-

1. Buyer submits ICPO
2. Seller issues FCO/SCO
3. Contract execution
4. Proof of product documentation
5. Inspection process
6. Loading and shipment
7. Final delivery

EN 590 is the current standard for all automotive diesel fuel. It is a 10 PPM sulphur content Gas Oil.

EN 590 specifies requirements for automotive diesel fuels, including limits for sulfur, cetane quality, density, distillation, lubricity, cold-flow properties, water and contamination.

For an export quotation, it is important to specify the edition of EN 590 and the exact cold-weather class, because some properties vary according to climate/season.

Standard : EN 590
Appearance : Clear, bright, free from visible contamination
Cetane number : 51
Cetane index : 46
Density @15C 820 - 845 kg/m
Sulfur : 0 mg/kg (10 ppm)
Flash point : 55C

EN590 10PPM Diesel is a high-quality ultra-low sulfur automotive fuel manufactured to meet the European EN 590 specification. With sulfur content limited to a maximum of 10 ppm, it is designed for modern diesel engines, commercial vehicles, generators, construction equipment, and industrial applications requiring cleaner combustion. The fuel typically offers a minimum cetane number of 51 and density around 820-845 kg/ cubic meter at 15 Degree Celsius, subject to the applicable specification and batch certificate. EN590 Diesel supports efficient engine operation, reduced sulfur-related emissions, and compatibility with advanced emission-control systems. Bulk supply is available for qualified international buyers through suitable export and logistics arrangements.

EN590 Diesel is a refined automotive diesel fuel formulated for modern compression-ignition engines and international fuel markets. Commonly supplied as EN590 10 PPM diesel, it is characterized by ultra-low sulfur content and controlled fuel-quality parameters designed for efficient combustion and reduced sulfur-related emissions. The fuel can be supplied in bulk quantities for transportation fleets, distributors, power-generation applications and industrial users, subject to applicable regulations and contractual specifications. Quality is verified through laboratory testing of sulfur, cetane characteristics, density, viscosity, flash point, water content, distillation and other relevant parameters. Bulk deliveries can be arranged through suitable terminals, pipelines, tankers or approved fuel-storage facilities.

Key Specifications

Product Type: Automotive Diesel Fuel
Standard: EN 590
Sulfur Content: Maximum 10 mg/kg (10 PPM) for EN590 10 PPM grade
Appearance: Clear to yellowish liquid
Cetane Number: Minimum 51 under EN 590 requirements
Density at 15�°C: Typically 820 - 845 kg/m Cube
Kinematic Viscosity at 40 Degree C: Typically 2.0 - 4.5 mm Square/s
Flash Point: Minimum 55 Degree C

Diesel fuel oil is a liquid fuel used in diesel engines in which fuel ignition takes place without any spark. As a result of compression of the air inlet mixture and the injection of fuel.

Diesel fuel is a refined petroleum product used mainly in compression-ignition engines such as trucks, buses, generators, agricultural machinery, and industrial equipment. It is heavier and more energy-dense than gasoline and is known for its fuel efficiency and durability.

Key Specifications
Cetane Number: Typically 45 - 55 (higher = better ignition quality)
Boiling Range : Approx. 180C to 360 C
Density : ~ 0.820.86 kg/L
Energy Content : ~35 - 38 MJ/L
Flash Point : ~52C to 96C (safer than gasoline)
Viscosity : Higher than gasoline (better lubrication properties)
Sulfur Content: Ultra-low sulfur diesel (ULSD) < 15 ppm in modern fuels
Color : Light yellow to clear (may vary by grade)
Composition : Long-chain hydrocarbons (C10 - C20 range)
Ignition Type : Compression ignition (no spark plug required)

EN590 Diesel Fuel

EN590 DIESEL FUEL
PRODUCT ORIGIN: KAZAKHSTAN
DELIVERY: CIF, FOB, TTO
INSPECTION: SGS
PAYMENT METHOD: TT, MT103, TRC20USDT
Quantity. 100, 000MT per month for 13 months.
Shipping Terms. CIF is possible, yes.
Destination Port. Jurong Singapore possible

EN 590 is a premium automotive diesel fuel that complies with the European EN 590 standard.

It is refined to deliver high engine performance, improved fuel efficiency, and reduced emissions.

With an ultra-low sulfur content (maximum 10 ppm), EN 590 is suitable for modern diesel engines equipped with advanced emission control systems, including passenger vehicles, commercial trucks, buses, generators, agricultural machinery, and industrial equipment.