Find Verified Storage Tanks Suppliers, Manufacturers and Wholesalers

Maturity indices

We harvest our asparagus when they reach a 9 inch length and pack them in different sizes in a pyramid box with a soaked pad on the bottom to maintain humidity, this boxes will be hydrocooled and storage in our cooler until they are load and shipped.

Quality
Fresh asparagus will be dark green and firm with tightly closed, compact tips. Stalks are straight, tender and glossy in appearance.

Temperature

(0 - 2C (32-35.6F)

Storage life is typically 14-21 days at 2 C and can be extended up to 31 days by 7-10 days storage at 0C and atmospheric modification. Extended storage (~ 10-12 days) in air at 0 C may cause chilling injury.

Different presentation in broccoli will include bunches (14 and 18), crowns, china cut crown and florets. Packed in our harvesting machines in the fields will be transported to the packing shed to cool it in the vacuum cooler or iced in the ice injector depending how our customers prefer it.

Quality
Good quality broccoli shuld have dark or bright green closed florets. The head should be compact, with a cleanly cut stalk of the required length. There should be no yellow florets and there should be no discoloration on the stem bracs.

Temperature
Low temperature is extremely important to achieve adequate shelf life in broccoli. A temperature of 0 is required to optimize broccoli storage life (21 - 28 days). Heads storage at 5 can have a storage life of 14 days; storage life at 10 is about 5 days.

Our Kale will be packed in the field but this does not mean food safety is less strict; We put special attention on this kind of crops packed outside. Every leaf we pack will be well trimmed no more than three fourths of an inch from the outer leaves. We can pack it Also in the packing shed if the client requires it.
Quality

Our kale consist of only one type of variety which is well trimmed, ot stuned, free from decay, and damage caused by yellow or discolored leaves, seeds items, wilting, bud burn, freezing, dirt, diseases, insects or mechanical or other means.

Temperature

Kale should be stored at 0 ° C (32 ° F) with 98 to 100% RH. Storage at -1 ° C (31.1 ° F) may cause freezing, while storage at 1 ° C (33.8 ° F) may promote senescence-related storage losses, especially if held in long-term storage. High RH minimizes decay; light in the storage reduces physiological disorders, mainly leaf yellowing, and weight loss.

LPG tank

Lpg tank gas horizontal above ground 454 liters
24" diam. 67" lenght 250# work pressure



96-120 per load

With kind regards, I put to your consideration our intention of SALE of MANGANESE MINERAL CRUSHED at 3 â??, of national origin.
-Product: Manganese Mineral.
- Density: 40% minimum.
- Accreditation: Documentation and certification for sale and export according to Mexican regulations.
- Location: Seller's storage yards in the state of Guerrero.
$3.7 US/additional quality % point

We will grow plain and curly parsley depending on our clients preferences, normally we will harvest after 70 to 90 days of planting. All the process is done with the food safety procedures that distinguish us even that is packed in the field our team will put extra attention on this type of crops that are packed outside.

Quality

After being packed in the fields it is cooled and iced in our ice injector which will take out the heat from the field. Our parsley consist of the same variety parsley never mixing curly with plain. It would be green color, free of any kind of defects or seed stems and free from decay.

Temperature

Optimal conditions for storage is 0 C (32 F) with 95 to 100% relative humidity at this condition parsley can last up to 1 or 2 months, compared to only 3 days at 18 to 20 ° C (64 to 68 ° F). End point of storage will happen when parsley wilts, at around 20% of weight loss.

According to the requirement of our costumer we will harvest 24s, 30s, 36s or hearts trimming the celery with the stainless steel equipment and packing it and washing it on the field and then transfer to the packing shed where it will be cooled at the vacuum cooler and stored in our cooling room is loaded Until it and shipped.

Quality
Our celery consists of well-formed, well-developed and clean stalks with a medium to dark green color and are fresh crisp and free from dehydration. We leave out any celery That presents blackheart, brown stem, soft rot, double and any freeze damage, crack growth, horizontal cracks, pithy branches, seedstems, Suckers, wilting, blight, other disease, insects or mechanical damage.

Temperature

At optimum conditions, celery should have a good quality after storage for 5 to 7 weeks, to achieve this we pre-cool it in our vacuum cooler, the storage in our cool room at 0-2C and maintain at that temperature until our clients receive it .

Advantages of PTFE electrolysis test tank:

1. Chemical Resistance: PTFE (Polytetrafluoroethylene) is known for its exceptional chemical resistance. It can withstand aggressive acids, alkalis, and organic solvents without degradation. This makes PTFE electrolysis test tank highly suitable for processes involving corrosive chemicals, where traditional materials might corrode or degrade.

2. High Temperature Stability: PTFE maintains its structural integrity and performance in a wide range of temperatures, typically between -200�°C and 260�°C. This high thermal stability makes PTFE electrolysis test tank ideal for processes that involve high temperatures.

3. Non-stick Surface: PTFE has a naturally low surface energy, meaning that it has excellent anti-stick properties. This is beneficial in electrolytic processes where the buildup of by-products or contaminants on the cell surface can affect efficiency.

4. Electrical Insulation: PTFE is a good electrical insulator, which makes it ideal for use in electrolysis test tank, where electrical isolation and safety are critical.

5. Durability and Longevity: PTFE is highly durable and resistant to wear, ensuring long-term reliability and performance in demanding electrolytic processes.

6. Low Surface Friction: The low friction coefficient of PTFE reduces wear and tear on the components in the electrolytic cell, leading to lower maintenance requirements and increased efficiency over time.

Applications in Various Industries:

1. Electroplating and Metal Refining

2. Chemical and Pharmaceutical Manufacturing

3. Water Treatment

4. Battery Manufacturing

5. Electrosynthesis and Electrodialysis

6. Semiconductor Manufacturing

7. Hydrogen Production

PTFE, or Polytetrafluoroethylene, is a synthetic fluoropolymer renowned for its unique properties that make it suitable for a wide range of industrial applications. Its chemical resistance, non-stick characteristics, high temperature tolerance, and electrical properties have earned it the nickname "the king of plastics."

Properties of PTFE:

Chemical Resistance: PTFE is highly resistant to most chemicals, acids, and bases, making it ideal for handling corrosive materials.
Non-Stick Surface: Its low surface energy results in a non-stick surface, ensuring easy cleaning and minimal residue build-up.
High Temperature Resistance: PTFE can withstand temperatures ranging from -200�°C to +260�°C, making it suitable for extreme environments.
Electrical Properties: It exhibits excellent electrical properties, including high resistivity and low dielectric constant, making it useful in electrical applications.

Product Usage:
Carrying semiconductor chips, wafers, silicon wafers, photovoltaic cells with acid tank

Applicable industries:
Semiconductor Industry...

other products:
PFA beaker, PFA reagent bottle, PFA drop bottle, PFA sample dissolution tank, PFA scrubber bottle, PFA drop bottle...
FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...

Product Usage:
Store reagents, digest samples
Can be used with a hot plate

Applicable industries:
Geology and minerals, ICP, isotope industry, heavy metal industry, semiconductor, new energy, new material, chemical pharmaceutical, non-ferrous metal, precious metal...

other products:
PFA beaker, PFA reagent bottle, PFA drop bottle, PFA graduated cylinder, PFA scrubber bottle, PFA drop bottle...
FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...

Product Features:
1. PFA material (translucent)
2. High and low temperature resistance: -200 C to 260 C
3. Strong acid and alkali resistance, high temperature resistance, wear resistance, antistatic
4. No dissolution and precipitation, no contamination of samples
5. Integral molding

Product Specifications:
15/20L

PFA series parallel reaction bottle is an efficient and multifunctional chemical reaction device. Its core advantage lies in the use of PFA (soluble polytetrafluoroethylene) material. PFA has excellent high and low temperature resistance and a wide range of operating temperatures. It can maintain stability in extreme environments and ensure a safe and controllable reaction process.
In addition, PFA has extremely high chemical stability and can tolerate almost all chemical solvents, effectively preventing cross-contamination and ensuring the purity of reaction results. Its dielectric properties are excellent, and its electrical insulation is not affected by temperature, providing a stable electrical environment for experiments.
In terms of structural design, the PFA series parallel reaction tanks are connected in series and parallel, which can flexibly adjust the reaction process and improve reaction efficiency. At the same time, its transparent and colorless appearance makes the reaction process clear at a glance, making it easy to observe and monitor.
In summary, the PFA series parallel reaction tank provides strong support for laboratory research with its excellent PFA characteristics and efficient design, and the entire device supports customization.

PTFE, or Polytetrafluoroethylene, is a synthetic fluoropolymer renowned for its unique properties that make it suitable for a wide range of industrial applications. Its chemical resistance, non-stick characteristics, high temperature tolerance, and electrical properties have earned it the nickname "the king of plastics."

Properties of PTFE:

Chemical Resistance: PTFE is highly resistant to most chemicals, acids, and bases, making it ideal for handling corrosive materials.
Non-Stick Surface: Its low surface energy results in a non-stick surface, ensuring easy cleaning and minimal residue build-up.
High Temperature Resistance: PTFE can withstand temperatures ranging from -200�°C to +260�°C, making it suitable for extreme environments.
Electrical Properties: It exhibits excellent electrical properties, including high resistivity and low dielectric constant, making it useful in electrical applications.

1. Product introduction
The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.

The tetrafluoroethylene products produced by our factory do not add recycled materials and can be used for trace analysis, isotope detection, ICP-MS/OES/AAS Analysis and other experiments
Customized 1-30L PTFE cleaning/reaction/liquid storage barrel, which can be equipped with valves and joints.
1. Product features:
1. Appearance pure white.
2. High and low temperature resistance: applicable temperature is -200 to 250 degrees Celsius.
3. Corrosion resistance: Resistant to strong acid, strong alkali, aqua regia and various organic solvents, and has no dissolution, adsorption or precipitation.
4. Anti-pollution: The blank value of metal elements is low.
5. Insulation: not affected by environment and frequency, with small dielectric loss and high breakdown voltage.
6. Resistant to atmospheric aging, radiation resistance and low permeability.
7. Self-lubricating: has the smallest friction coefficient among plastics.
8. Surface non-stickiness: It is a solid material with small surface energy.
9. Mechanical properties are soft and have low surface energy.

1. Product Introduction
PFA cleaning tank is an upgraded version of PTFE cleaning barrel, specially designed for semiconductor photovoltaic and other industries, with one-piece molding, no need to worry about leakage. It is mainly used for soaking and cleaning flower baskets with chip silicon wafers. Due to the characteristics of PFA, it can withstand the corrosiveness of the cleaning solution, and at the same time, the blank value of metal elements is low, there is no dissolution or precipitation, and it will not pollute chip wafers, etc.
Alias: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Cover: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Cover: 400*300*42mm
New model: 400*300*12cm
The size of the semiconductor wafer cleaning tank can be customized as required. At the same time, it is equipped with the same PFA cover to prevent pollution.
2. Features:
1. Translucent appearance, easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties are independent of temperature and frequency;
5. Anti-pollution: low background value, metal element lead and uranium content is less than 0.01ppb;
6. No dissolution and precipitation, will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, not easy to deform;
9. Teflon plastic, durable and not easy to break
Nanjing Binzhenghong Instrument Co., Ltd. has more than 30 years of experience in the production and processing of PFA products. The company has invested a lot of manpower and material resources in the research and development of solar photovoltaic related products. Up to now, the photovoltaic products launched by the company include-solar silicon wafer basket, solar silicon wafer carrier, silicon wafer basket, semiconductor cleaning basket, PFA tweezers, wafer gripping tweezers, PTFE basket, etc.
3. PFA products:
PFA reagent bottle, PFA volumetric flask, PFA beaker, PFA measuring cylinder, PFA measuring cup, PFA washing bottle, PFA absorption bottle, PFA tweezers, PFA flower basket (PTFE flower basket)

1. Product introduction
The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.

We bunch and pack on cartons our radishes or top them and pack it on polyethylene bags of different sizes. Radishes will be harvested depending on the post-seeding days which may very from 30 to 60 days; we will pack mild flavor and crisp radishes with a minimum size of 5/8 Inches.

Quality

Red Radish are uniform and a similar shape for the variety, well FORMED, smooth, firm but tender texture of, and free of growth or harvest damage, and free from decay, disease or insects. Bunched radish tops are fresh in appearance, turgid, and free of freeze injury or other serious injury, seed stalk, yellowing or other discoloration, disease, decay or insects.

Temperature

Optimum temperature for radishes is 0 C (32 F) and a relative humidity of 95 to 100%, rapid cooling is essential to Achieve the full storage potential for bunched and topped roots. It also can be packed top-iced, with this conditions will have acceptable quality for 7 to 14 days with tops and 21 to 28 days if topped.

We size our onion according to the USDA when the size and the maturity are at the right stage we will harvest and undercut the bulbs and let them dry in the fields until it is lost 5-8% of the weight after harvest then the product its transported to the packing shed where it is sorted and bagged in a automated process.

Quality

We only pack mature fairly firm and well shaped onions, free from decay, wet sunscald, doubles and bottlenecks. Free from damage caused by seeds items, splits, dry sunken areas, sunburn, and sprouting, staining, dirt or any mechanical damage or disease and insect caused defects.

Temperature

Optimum conditions for field curing are when temperatures are at least 24 C degrees (75 F) or exposure for 12 hours up to 30 to 45C (86 to 113F) for forced air-curing. Storage of mild onions will last up to .5 to 1 month at 0 C (32F) and pungent onions will last from 6 to 9 months at 0C (32F).

Product Usage:
It can be connected with a flask, condenser, separating funnel, etc. to form a distillation and separation device (such as a hydrogen fluoride distillation device)
It has good airtightness and can also be used as a sample reaction tank, or to collect samples at the end of the reaction experiment.
Cans without welded double necks can be used to clean small utensils such as sample dissolving tanks.

Applicable industries:
Semiconductor industry, isotope analysis, heavy metal industry, geochemistry...

other products:
PFA beaker, PFA reagent bottle, PFA drop bottle, PFA sample dissolution tank, PFA scrubber bottle, PFA drop bottle...
FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...

We will define the time of harvest according to the mean diameter of the base plate of the immature bulb. This diameter is between .6 and 1.3 cm (1/4 to 1/2 inch) and this will also define the size that it will go on small, medium or large. In the fields we will cut the root to a ¼ to ½ inch and the end leaving the green onion to a length of 11 inches, it is Transferred That after to the packing shed Were it is washed and packed.
Quality

Our green onions have a thin, with shank at least 5 to 7.5 cm (2-3 inches) in length, they are well formed, uniform in shape, thin necked, turgid, bright in color, well cleaned, and free from decay, insect-injury, mechanical damage, broken or crushed leaves, or dehydrated clipped ends.

Temperature

Green onions held at 0 C (32 F) and 98 to 100% relative humidity will remain fresh and flavorful for up to 4 weeks. Package- icing and perforated polyethylene film liners are used to maintain quality. Storage life of green onions at 10 C (50 F) is 7 to 10 days. Green onions benefit from light mist.

We do bunched beets, which are tied in bunches and tops are full length or partially or less than 6 inches. Beets With short tops trimmed to show leaf steams not more than Ranging 4 inches in length and topped beets tops With no more than removed to one half inch in length.

Quality

Our beets consist of similar varietal characteristics of the roots of which are well trimmed, firm, fairly smooth, fairly well shaped, fairly clean and free from soft rot and free from damage caused by cuts, freezing, growth cracks, disease, rodents or insects, or mechanical or other means. Bunched beets or beets with short trimmed tops have tops which are fresh and free from decay and free from damage caused by discoloration, freezing, disease, insects or mechanical or other means.

Temperature

Beets held at 0-C (32-F) and 98 to 100% relative humidity will remain fresh and flavorful for up to 4 weeks. Package-icing and perforated polyethylene film liners are used to maintain quality. Storage life of Beets at 10°C (50°F) is 7 to 10 days.

All of our leeks are firm and smooth, free of blemishes, and have characteristic white stems with dark green leaves. The cut bottoms should be flat, as rounded bottoms may indicate prolonged storage. We will pack them on the packing shed washing them which assures that it will not have any dirt residues and that will be the appropriate length.

Quality

We will pre cool the crop in the hydro cooler and then after being washed and packed in a carton or RPC box it is topped with crushed ice. This helps achieve the optimum temperature for extending the postharvest life. Leeks will be trimmed so that only at 30.5 cm (12 in) portion of the green top remains. They can, DEPENDING ON DIAMETER be bunched in groups of three and Placed in polyethylene film bags to Prevent moisture loss and if the clients requires it.
Temperature

Leeks can be stored for 2 to 3 mo at 0 ° C (32 ° F) with 95 to 100% RH. High RH is essential to prevent wilting. Good refrigeration retards elongation and curvature that develops in leeks at 10 to 21 ° C (50 to 70 ° F). Leeks held in polyethylene lined crates remain sellable for 5 to 6 weeks at 0 ° C (32 ° F) under crushed ice, 4 weeks at 0 ° C.

EN590 10PPM, Ready Stock at Zhoushan Port Tanks, China.
No LC required. Just Dip Test and Pay by TT.
Buyer can opt for either TTT or TTV basis deliveries
All the documents verified today. Ready to issue Dip Test Authorisation.

Tank stock sale in Al Hamriyah, UAE
Quantity: 40,000mt
MOQ: 10,000mt
Only TTV procedure
Payment by MT103 after Dip Test
The seller is an Iranian manufacturer.
F2F meeting in Dubai office available before payment.
Contact me on WhatsApp for price.

Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200 to 260 degrees Celsius
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.

1. Product introduction
The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm
New: 400*300*12cm
Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.

Solar heater for water of 179 liters - dct-470-47-150 usd $550.00
Brand diceno.
Water container is suitable for 4 people.
Outer tank is made of stainless steel; inner tank is made of aluminum with insulating polyurethane material.
Measures of the tank are 1.80 meters of length x 46 cm of diameter.
It contains 24 crystal tubes of 46 mm/1.50 meters.
Fuse of entrance and exit is 1/2 "
Weight of the equipment in operation is 574.20 pounds or (261 kg).
Warranty is 5 years by manufacture defects.

Technical Parameters
Product name: PFA reagent bottle
Specifications (ml): 30/60/100/250/500/1000/2000/3000/4000/5000
Material: PFA
Withstand temperature: -196-260â??
Product Features
1. Translucent appearance;
2. Temperature resistance: operating temperature -200~+260â??;
3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
4. Anti-pollution: low metal element value;
5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents;
use:
1. Suitable for storing and packaging different chemical reagents and standard samples;
2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials;
3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis.
Our PFA series products:
Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products

'We can offer alcohol based hand sanitizer in 55 gallons drum and 275 gallons IBC Tank

EXW Cordoba, Mexico.

If you are interested please contact us by email for a Performa invoice and a formal quotation. Please see details below:

Minimum Order: 20 Feet Container.

1
COVID 19 OFF
(Gel Hand Sanitizer)
55 Gallons Drum
$ 648.96 USD

2
COVID 19 OFF
(Gel Hand Sanitizer)
275 Gallons IBC Tank
$ 3,240.00 USD'

Technical Parameters
Product name: PFA reagent bottle
Specifications (ml): 30/60/100/125/250/500/1000/2000/3000/4000/5000
Material: PFA
Withstand temperature: -196-260 Celsius degree
Product Features
1. Translucent appearance;
2. Temperature resistance: operating temperature -200~+260â??;
3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
4. Anti-pollution: low metal element value;
5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents;
use:
1. Suitable for storing and packaging different chemical reagents and standard samples;
2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials;
3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis.
Our PFA series products:
Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products

PFA, a material known for its outstanding properties, exhibits numerous advantages when utilized in Quick Dump Rinse (QDR) Basins/Tanks. Here are the key points outlining the benefits of PFA in this application:

Chemical Resistance:
PFA possesses excellent chemical stability, resisting corrosion and erosion from acids, bases, organic solvents, and other chemicals. This ensures that the QDR Basin/Tank remains unaffected by the various chemicals used in the rinsing process, maintaining its integrity and functionality.
Temperature Resistance:
PFA has a broad temperature range of -200�°C to 260�°C, allowing it to perform stably in extreme temperatures. This is crucial in QDR applications, where rapid temperature changes can occur during the rinsing process.
Low Friction Coefficient:
The smooth surface of PFA has a very low friction coefficient, minimizing wear and tear on the Basin/Tank and improving its durability. This also reduces the amount of energy required for rinsing operations, leading to cost savings.
Electrical Insulation:
PFA's excellent electrical insulation properties ensure that the Basin/Tank remains safe from electrical hazards, even in high-voltage environments. This is especially important in semiconductor manufacturing and other applications where high purity and precision are critical.
Non-Stick Surface:
The non-stick nature of PFA's surface makes it easy to clean and maintain, reducing the risk of contamination and ensuring the effectiveness of the rinsing process.
Cost-Effectiveness in the Long Run:
While PFA may have a higher initial cost compared to other materials, its durability, chemical resistance, and low friction properties translate into reduced maintenance costs and longer service life in the long run. This makes it a cost-effective solution for QDR Basins/Tanks.
In summary, PFA's unique combination of chemical resistance, temperature stability, low friction, electrical insulation, and non-stick properties makes it an ideal material for Quick Dump Rinse (QDR) Basins/Tanks. Its ability to withstand extreme conditions and maintain its performance over time ensures the efficiency and safety of the rinsing process.

1. Product Introduction:
PFA sample vials are widely used in geological and mining experiments. They are a versatile experimental tool, also known as dissolution cups, digestion bottles, sample containers and beakers. These tanks are suitable for low-pressure and medium-pressure dissolution, as well as digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these tanks can improve the accuracy of trace analysis. In addition, these tanks are designed with different bottom shapes according to experimental requirements, such as U bottom, flat bottom and V bottom. If you need to use a hot plate or a digestion instrument with holes for experiments, you can get better results with PFA dissolution tanks.

2. Description:
Specifications (ml): 3/5/6/7/15/22/30/40/60
Material: PFA
Temperature tolerance: -200-260â??
Applicable to sample pretreatment experiments for analysis of dozens of elements in geological and mineral samples such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc.

3. Characteristics:
1. Translucent appearance, smooth inner wall, no water hanging, easy to clean;
2. Temperature resistance: operating temperature -200ï½?+260â?? (do not exceed 150 degrees under closed conditions);
3. Threaded mouth, excellent sealing, no air leakage;
4. Anti-pollution: low blank value of metal elements;
5. With low dissolution and precipitation characteristics, it is a vessel for storing standard substances and different reagents;
6. The cover and body can be digitally numbered to avoid confusion;
7. The V-shaped bottom design is convenient for the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical exploration samples.
4. Typical users:
Isotope, mining, metallurgy, nuclear industry and other industries
5. PFA series products:
Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes, etc.web:

organic honey from campeche.
european bee and melipona.
best quality
in 300kg tanks or 350grs, 500grs and 1kg glasses.
with mark or without to develop your own mark.
industry honey too.
all certification to export and make organic tramits on destination country.

Product features:
1. The microwave tank body is made of TFM material, and the size matches the original instrument without error.
2. TFM is resistant to high and low temperatures -200~+260â??, and can withstand high temperatures up to 300â??. It has the characteristics of lower background value, better deformation resistance, penetration resistance, and stronger recovery under high temperature and pressure.
3. The experimental data is no less than that of the original factory, and the cost is low, which greatly reduces the cost of purchasing consumables for many scientific research units.
4. It has the characteristics of low background, better deformation resistance, penetration resistance, and stronger recovery under high temperature and high pressure.
5. Our factoryâ??s production technology ensures the smoothness of the inside and outside walls of the microwave tank.
6. The inner tank can be used with our factoryâ??s acid-catching electric hot plate for later acid-catching experiments.
4. Item number
Matching MARSXpress PLUS 110ml (24-bit instrument)
Jacket item number 404035 Body + cover + gasket item number 404175
Complete with MARSXpress Plus Vessels 100 mL (instrument 24 positions)
Jacket item number 212031 Body + cover + gasket item number 212120
Matching MARSXPRESS VESSSELS 55ml (instrument 40 positions)
Jacket item number 212025 Body + cover item number 907576 Gasket 212020
Matching MARSXPRESS VESSSEL 20ml (instrument 40 positions)
Jacket item number 212035 Body and lid item number 907575
Matching MARSXPRESS VESSSELS 10ml (instrument 40 positions)
Jacket item number 212040 Tube + cover item number 907571
Matching EasyPrep & EasyPrep Plus100ml with black ring (12-bit instrument)
Coat item number 431740/tank 432175/lid (with black circle) 131125

1. Product parameters
Product name: PFA triangular funnel
Material: PFA
Size: �?40/150mm
Temperature resistance: -200-260â??
2. Features:
1. Excellent corrosion resistance: PFA material has excellent corrosion resistance and can withstand corrosion from various acids, alkalis, organic solvents and other chemicals, ensuring the safety and reliability of experimental operations.
2. Low surface energy: The low surface of the PFA material allows the liquid to flow more easily, reducing the adhesion of droplets and effectively avoiding the problems of sample loss and cross-contamination.
3. Flexible and diverse sizes and shapes: PFA triangular funnels can be customized in different sizes and shapes according to experimental needs, and are suitable for various experimental operations and sample processing.

3. Application:
PFA triangular funnels are widely used in laboratory pipetting operations, which can realize the addition, separation and transfer of liquids and improve experimental efficiency and accuracy. It can be used in semiconductor, new materials, new energy, biopharmaceutical, petrochemical and other industries.
4. Our PFA series products:
Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.

Product Introduction:
We can provide PFA isotope ion exchange columns of different capacities, diameters and lengths. This product is cast with PFA as the material, and the design combines the characteristics of a variety of capillaries and storage containers to meet your needs. The size can be customized according to your experimental requirements. The threaded port design allows users to choose a cap to protect the integrity of the liquid sample in the chromatography.
Product Features
1. Repeatability: PFA column tubes can be used multiple times, and the material background is low, which greatly saves experimental costs
2. Visibility: When separating color samples with color, the PFA transparent column can visually see the separation color band
3. Sieve plate: Sieve plates of various particle sizes can be provided, with excellent distribution effect to achieve better separation
4. Large sample loading capacity: can be customized according to your experiment
5. One-time molding, no welding gaps, smooth liquid flow, ensuring durability
6. To prevent the sieve plate from falling off, the bottom can be sharpened according to the flow rate requirements
PFA series products:
Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, ion exchange columns, crucibles, valves, joints, delivery pipes and other products.

PFA reaction vessel is an efficient and multifunctional chemical reaction device. Its core advantage lies in the use of PFA (soluble polytetrafluoroethylene) material. PFA has excellent high and low temperature resistance and a wide range of operating temperatures. It can maintain stability in extreme environments and ensure a safe and controllable reaction process.
In addition, PFA has extremely high chemical stability and can tolerate almost all chemical solvents, effectively preventing cross-contamination and ensuring the purity of reaction results. Its dielectric properties are excellent, and its electrical insulation is not affected by temperature, providing a stable electrical environment for experiments.
In terms of structural design, the PFA reaction tanks are connected with tubes and valves, which can flexibly adjust the reaction process and improve reaction efficiency. At the same time, its transparent and colorless appearance makes the reaction process clear at a glance, making it easy to observe and monitor.
In summary, the PFA reaction tank provides strong support for laboratory research with its excellent PFA characteristics and efficient design, and the entire device supports customization.

Characteristics of digestion vessels inside microwave digestion system:
1. Material selection: TFM (or PFA), low blank value
2. No recycled materials are added to the product to ensure purity
3. Suitable for use with microwave digestion instruments of various brands and models
4. The price of the same product quality is one-half to one-third of the original factory
5. Various types of microwave digestion tanks can be processed according to customer requirements
Our factory has its own advantages:
1. Our factory can process raw materials without adding recycled materials, ensuring a very low background
2. For microwave digestion vessels of various models, as long as you need to drive acid later, we can help you match acid-driving electric heating plates of different sizes, which greatly saves you the trouble of multiple consultations, and the matching purchase is more cost-effective
3. Any part we process can match the original factory

Any part we process can match the original factory, and the price is better than the original factory
1. Suitable for Italian Milestone ETHOS outer lining 34199
2. Suitable for Italian Milestone ETHOS digestion tank 33806
3. Suitable for Milestone ETHOS digestion tank cover 35140
5. Suitable for Milestone ETHOS main control spring 050184
6. Suitable for Milestone ETHOS main control gasket 050183
7. Suitable for Milestone ETHOS ceramic sleeve (including sealing ring) 055135
8. Suitable for Milestone ETHOS main control bracket 45191T
9. Suitable for Milestone ETHOS sealing screw 055139
Our factory can customize the vessels that are suitable for microwave digestion systems of various manufacturers as follows:
Adapt to American CEM, Milestone, Anton Paar, Jena, Shanghai Sineo, etc.

Product Usage:
Store samples, can be used with acid purification system

Applicable industries:
Isotope industry, heavy metal industry, semiconductor, new energy, new material, chemical pharmaceutical, nonferrous metal, precious metal...

other products:
PFA beaker, PFA drop bottle, PFA sample dissolution tank, PFA scrubber bottle, PFA drop bottle...
FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...

In Aria Specialities (Grupo Ercus), we manufacture 100% pure extra virgin and organic Avocado Oil, with the highest standards of quality and the best fruits of our country (México).
Our oil can be used as edible (gourmet sector) as well as for the cosmetic and pharma industries.
Our price CIF is $21.00 USD per kg. in bulk (Drums or Flex Tanks)).
We can send (COA) and a sample bottle to taste & test it. Regards.

-