Specifications:
Colors: Clear with dots
Density: 1.2 g/cm3
Quality: A Grade, can be used for advertising, lighting
Certification: SGS
Size: Customized
Material: Acrylic
Brand Name: Guangjia
Thickness: 2mm
Size: Customized
Please quote for the following wholesale product requirement -
Product Name: Light Guide Plate
Specifications:
- Custom light guide plate of 1200mm x 600mm. with on the side a small slide so that the led lights of the LED strip falls in.
- Top sides need to be closed with white sticker.
- LED strip needs to be dimmable. and give total of around 5500-6000lumen per panel. thickness is not very important as long as the LED strips is within the thickness of the panel.
Buyer is interested to receive quotations for the following RFQ -
Product : Baggese Product Range
Specifications:
like : Plates . Bowls.
Trays food type
Compartment trays With lids Also without lids
NOTE :
buyer want speciation of products
And hs code/commodity code
Packing details
first 20 ft
Then 40 ft container load
NOTE : LC is the payment term . Please DO NOT contact if you don't work on LC
Buyer is interested to receive quotations for the following RFQ -
Product Name: Customized Light Guide Array
Specifications:
Quantity: Minimum Order Quantity (MOQ) of 1000 units
Specifications:
- 4 guide array with 6mm spacing
- Enclosure mounted
- Push fit
- Guide diameter: 3mm
- Enclosure Wall Thickness: 2mm
- Height to PCB from bottom side of the enclosure: 38mm
Features:
- Push-fit design for easy installation into the enclosure
- Color: Clear
Buyer is interested to receive quotations for the following RFQ -
Product name - 18 Watt LED Light Drivers
Specifications :-
Type - LED bulb raw material, DOB drivers, PF>0.5 Capacitor > 30 micro farads. A type bulb casing we with heat sink lining, E 27 cap, defuser yellow warm.
Quantity - 2000 pieces initially later on MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Malaysia Kuala Lumpur, Malaysia
Please provide a quotation to the following requirement from importer -
Product Name - Fabric
Specifications :-
Type- Cloth, Bunting, Acrylic
3.1 First Article. When specified, the contractor shall furnish a sample of cloth for first article
inspection and approval (see 4.3 and 6.2).
3.2 Material.
3.2.1 Fiber. The fiber shall be first quality, 3-denier, semi-dull acrylic staple with a minimum
staple length of 2-inches, see 4.4.1.
3.2.2 Yarn. The acrylic fiber shall be evenly spun and twisted into a two-ply yarn for both the
warp and filling, see 4.4.1.
3.2.3 Weave. The cloth shall be a bunting plain weave, see 4.4.1.
3.2.4 Color. The color of the finished cloth shall be as specified below in the following classes
and shall match its standard sample, see 3.2.6, 4.4.2.
Class 1 – White 3032
Class 2 – Black 3227
Class 3 – Blue 3341
Class 4 – Green 3429
Class 5 – Yellow 3510
Class 6 – Red 3803
Quantity - 1000 meters later on MOQ
