Find Verified Tempering High Tensile Steel Bs En10025 6 S500Ql Buyers, Importers and Buy Leads

The buyer would like to receive quotations for -

Product Name: High Tensile Steel Wire

Specifications:
High Tensile Steel Wire as per the following specs
Bright Plain High Tensile Steel Wire of 7mm Diameter QTY 250 Metric Tons
1) Steel required must be bright plain - high tensile steel wire 7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.
2) The steel should conform in all respects with the requirements of the latest edition of BS. 5896 or Chinese specifications [prestressed wire 7.00-1570-WLR-P-GB/T 5223/2002] or equivalent.
3) The nominal tensile strength of the steel should be (1570 N/mm2).
4) The steel should be of “Low relaxation “quality, and the wire is pre-straightened and will run out straight form the coil when used at site.
5) No joint is allowed in the wire which should be one piece in the coil.
6) Steel should be supplied in large diameter coils of (1.8 -2.4) m.
7) The weight of Each coil should be approximately 1000 kgs.
8) Good attention should be paid to the packing of each coil to ensure good protection to the steel during loading, shipping, unloading, transportation, and storing at the site of the purchaser. For that, every coil should be tightly wrapped by proper and secure seaworthy packing.
9) Each coil should have a separate label made of steel sheet with a reasonable size. This label should contain the following information: will be given upon production
10) The price should be valid for at least Two Month and must be based on steel NET weight.

Quantity Required : 250 Ton/Tons

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

Please provide a quotation to the following requirement from the importer -

Product Name: High Tensile Steel Strapping Black

Specifications:
Other Name: Steel Strapping
Color: Black
Type: Steel Strip
Usage: For Packing
Material: Steel
Application: Steel Coil Packing

Quantity Required : 30 Ton/Tons

Shipping Terms : CIF

Destination Port : Chennai, India

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Bala Manikandan

Please provide a quotation to the following requirement from the importer -

Product Name: Prestressed PC Steel Bright Plain High Tensile Wire

Specifications:
Diameter: 7mm
Type: PRESTRESSED PC Steel Bright Plain High Tensile Wire

Quantity Required : 150 Ton/Tons

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Said Alkam

Please quote for the following wholesale product requirement -

Product : Carbon Steel

Specifications:
For Shaft
With High Temper
used : for motor shaft
as per moq

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Uae, United Arab Emirates

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Mohamed Monsour

Please provide a quotation to the following requirement from importer -

Product Name: Threaded Rod 700 Mm Long Including Nuts 20 Sets. Material High Tensile Steel Or Stainless Steel

Specifications:
Standard:ISO,DIN,ANSI,JIS,BS
Grade:8.8

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Israel

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Dan Rabin

Please quote for the following wholesale product requirement -

Product Name: Steel Scrap

Specifications:
- High Tensil Strength Off Cut Cables 12- 14mm Diameter. 6 Feet Above

Quantity Required : 1 Twenty-Foot Container(sample)

Shipping Terms : CIF

Destination Port : Colombo, Sri Lanka

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Zuhair Salih

Buyer is interested to receive quotations for the following RFQ -

Product Name : Steel Structures

Specifications:
Pre Fabricated Plant Color Steel Roof Structure Building Plans Steel Warehouse Shed Steel Structure Design Industrial
Category:building 20x50 m
6 m height, 7,5 at center
8 windows each side 1 x 4 m
5 cm thickness if panel
Panel.core rockwool
1.buiding for a start
High tensile steel frames

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Greece

Payment Terms : Bank Tramsfer

Looking for suppliers from : Worldwide

Contact : Dimitrios Ntalagiannis

The buyer would like to receive quotations for -

Product Name: Carbon Steel Hot Rolled Coils

Specifications:
Brand: Nippon
1. SUS 304 Stainless Steel
2. SUS 430 Stainless Steel
3. SUS 309 Stainless Steel
4. SUS 316 Stainless Steel
5. SUS 321 Stainless Steel
6. Carbon Steel Hot Rolled Coil SA 1006
7. Carbon Steel Hot Rolled Coil SS400
8. Carbon Steel Hot Rolled Coil EN10025
9. Tin Ingot

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Dubai, United Arab Emirates

Payment Terms : L/C At Sight

Looking for suppliers from : Worldwide

Contact : Raquel Melody Borja

Please quote for the following wholesale product requirement -

Product : 1MT Jumbo Bags (FIBC)

Specifications:
for Bentonite
Polypropylene bulk bags of 1.0 ton, which should comply with BS EN ISO 21898:2005 and having the with following specifications:
1. Outer bag: Heavy Duty Polypropylene Fabric, 240 g/m, UV stabilized, Polyethylene liner or lamination, which fits into FIBC. Liner thickness should be a 6 mil LLD Polyethylene stitched all the way.
2. Safe Working Load (SWL) 1.5MT
3. Safety Factor: 6:1(both for Offshore and onshore).¨
4. Bag Type:
a. Standard duty reusable for offshore requirement
b. Single trip for onshore requirement.
5. Lifting Loops: Cross corner lifting straps which are stitched all the way around the bag, Color contrasting from the bag's fabric color.¨
6. Filling and discharge: Jumbo bag should have top & bottom spouts for filling and discharge, cord tied, the inner bag to be attached to the top of the outer bag.
7. UV Protection: The bags should be UV treated to the minimum level of 200 Kly. The residual tensile. Strength of the bulk bag should at least be 50% after 12 months.
8. The Bags should have permanently attached label with the following information¨
Manufacturer & Supplier names/address¨
FIBC Class¨
Date of Manufacture¨
Maximum Stacking Height¨
Special treatment¨
Safety Factor

9. Size 95cm x 95cm x 120cm

Quantity: 1 full container

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Jebel Ali Port, United Arab Emirates

Payment Terms : To be discussed with suppliers

Looking for suppliers from : India, China, Asia

Contact : Ali Mahdavi

The buyer would like to receive quotations for -

Product Name: Stay Wire

Specifications:
stranded steel wires
Stay wires shall be stranded steel wires, manufactured to BS 183, galvanized to BSI BS EN ISO 1461 with a minimum mean coating thickness of 2.83µm, or related IEC or other standards.
With a minimum breaking load of 60 K Newton. Stay wires shall be high tensile hot-dip galvanized with a diameter of 12mm (4mmx7). They shall be easy to bend and erect (not hard).
The outermost layer of stay wire shall be stranded with the right-hand lay.
All Stay wires shall be supplied on robust drums of approved materials and construction suitable to withstand
very rough transport and handling and to enable conductors or cables to be pulled out smoothly.
Drums shall be non-returnable and, if made from timber, shall be pressure–impregnated against fungal and insect attacks.
Wooden drums shall be lagged with closely fitting battens in accordance with standards as may be approved.
Battens shall be firmly secured to the drum flanges and finally, steel banded under tension close to each flange
using steel tape not less than 25 mm wide and 2mm thick and stapled to at least every third batten.
Drum spindle holes shall be reinforced by steel plates.
INSPECTION AND TESTING
• Test at Manufacturer’s Works.
• Galvanizing- Test.
Stay wire supplied shall be easily cut by a hacksaw and easily bent through 180 by hand since bulldog clamps are to be used for fixing stay wires after bending

Quantity Required : 75 Kilometer/Kilometers

Shipping Terms : CFR

Destination Port : Aqaba, Jordan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

Please provide a quotation to the following requirement from importer -

Product : Trans Metal And Alloys

Specifications:
Type :
1) Stainless Steels Cut Pieces Plate and Pipe Scraps.
2) Nickel Alloys Scraps.(309, 310, Inconel, Monel.., etc..)
3) Surplus Plate and Pipe in High Nickel Alloys.
4) Low Alloys Scraps.
5) Cobalt Alloys Scrap
6) Aircraft Scrap
7) Titanium Scrap

Quantity : 100 tons

Quantity Required : 100 Ton/Tons

Shipping Terms : CIF

Destination Port : India

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Tanveer Khan

Buyer is interested to receive quotations for the following RFQ -

Product Name: High Carbon Spring Steel Wire

Specifications :
Standard DIN17223, EN10270-1, JIS G3506 Grade SWRH82B Used Production Torsion Tension Springs Surface Finishing Coating Zink. Process: Cold Drawing
Sizes And Tensile Strength Size: 2,7mm-11mm With Tensile Strength 1300-2800mpa Application Making For All Kind Mechanical Torsional Spring Springs
Packaging Terms : In Coils By Plastic Film Inside And Plastic-woven Strip Outside 500 Kg

Quantity Required : 700 Ton/Tons

Shipping Terms : Ex-Work

Payment Terms : To be discussed with sellers

Looking for suppliers from : Worldwide

Contact : Bronislovas

Buyer is interested to receive quotations for the following RFQ -

Product : C45-C67 Quality 0.80 Mm Thick Coiled Sheet Rolls

Specifications:
Grade : 304 or 430 or 201
quality C67 or C45
Specifications :
[3:11 pm, 22/08/2023] Ceren: Class Ck 67
Number 11,231
Classification Steel
Standard EN 10132-4: 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery terms. Spring steels and other applications
Chemical Properties of Ck 67 Steel %
C Si Mn Ni P S Cr Mo
0.65 - 0.73 0.15 - 0.35 0.6 - 0.9 max 0.4 max 0.025 max 0.025 max 0.4 max 0.1
Mechanical Properties of Ck 67 Steel
Nominal thickness (mm): 0.3 - 3
Rm - Tensile strength (MPa) (+ A) 640
Nominal thickness (mm): 0.3 - 3
Rm - Tensile strength (MPa) (+ CR) 1140
Nominal thickness (mm): 0.3 - 3
Rm - Tensile strength (MPa) (+ QT) 1200-1900
Nominal thickness (mm): 0.3 - 3
R p0.2 0.2% yield strength (MPa) (+ A) 510
Nominal thickness (mm): 0.3 - 3
A - Min. elongation Lo = 80 mm (%) (+ A) 16
Vickers hardness (YG): (+ A) 200
Vickers hardness (HV): (+ CR) 315
Vickers hardness (HV): (+ QT) 370-580
Grades Equivalent to Ck 67 Steel
EU Germany France UK
EN DIN, WNr AFNOR BS
C67S Ck67 C68RR CS70

Quantity Required : 10 - 20 Ton/Tons Monthly

Shipping Terms : CIF

Destination Port : Turkey, Turkey

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Ceren Cavus

Please quote for the following wholesale product requirement -

Product Name: Steel Fibers

Specifications :
End Hooked Fibers Of 80 Aspect Ratio, 60mm Long And Of High Tensile Strength
It Should Be Glue Type

Quantity Required : 20 Ton/Tons

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : CAD Or Bank Transfer

Looking for suppliers from : Worldwide

Contact : Ziad Mitani

Buyer is interested to receive quotations for the following RFQ -

Product Name: Steel Tubes

Specifications :
Raw Steel Tubes Welded From Cold Rolled Strip 28x1 In Bars Of 6 Linear Meters Each
Our Item: 343600000
Quality: E195
Chemical Composition
% C, %Mn, % Si, %P, %S, %Al
0,055, 0,308, 0,027, 0,013, 0,015, 0,054
Mechanical And Technical Test: Tensile Test: Rp02 Yield N/mm 2 348 Rm Tensile N/mm 2 363 A5 % 27,5 Dimensions
Ton. 28,00x1,00x6.000
Packaging Terms : Bundles Of 297 Pieces Each. Packing Size mm. 480xh.440 Complete With Packaging Description Label

Quantity Required : 6000 Piece/Pieces

Shipping Terms : DAP

Destination Port : Italy

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Turkey

Contact : Perin Spa