Please provide a quotation to the following requirement from importer -
Product: Energy Meters
Specifications:
and the control for the wall box
Unit planned for load sharing EVSE
Charging Type: AC Charging (Three-Phase & Single-Phase)
1 unit to proof it is working
later as per moq
Payment Terms:
MT103, 100% cash transfer after against B/L clearance, SBLC
Destination:
United States
Looking for suppliers from:
Worldwide
Product Description
Please provide a quotation to the following requirement from importer -
Product Name: Crude Oil
Specifications :
Quantity: Trial 1,000,000 bbl, Annual 4,000,000 bbl. per month (1,000,000 bbl. x 4 Times)
The Procedure Approved By Pertamina
1. The Buyer will send a typical ICPO to the Seller/the Seller Mandate.
2. The Seller/the Crude Oil Producer issues the SCO/FCO to the Buyer.
3. The Buyer will issue the ICPO approved by PT PERTAMINA to the Seller/the crude oil producer.
4. The Seller sends the SPA (Sales Purchase Agreement) to the Buyer.
5. The Buyer will sign and seal the SPA at the office of the Seller/Crude Oil Producer. The SPA is to be
lodged on each party's banks respectively.
6. The Buyer will issue a BG/SBLC to the Seller's Bank account.
7. The Seller will issue the following PPOPs to the Buyer within three business days from the date of receipt
of the Buyer's BG/SBLC.
(1) Pre-Test Quality Report, Issued By The Refinery/the Crude Oil Producer (2) Confirmation Letter about Crude Oil Origin, Issued By The Refinery/the Crude Oil Producer
(3) Confirmation Letter about Supply, and Quantity Confirmation, issued by the Refinery/the Crude Oil
Producer
(4) Pre-Shipping Instruction/Voyage, Issued By The Refinery/the Crude Oil Producer
Note:The PPOP must be addressed as follows:
Atten: The Seller's Name
Cc: O., Ltd./ Pt Pertamina
8. The Buyer Propose Pertamina International Shipping 's (PIS) Q88 & ETA for approval by the
Refinery/the Crude Oil Producer loading port terminal.
9. After PIS's Q88 Was Approved, The Seller Will Issue The Following Two Documents To The Buyer Within
three business days.
(1) Shipping Instruction/Voyage, Issued By The Refinery/the Crude Oil Producer
(2) Port Entry Permit, Issued By The Refinery/the Crude Oil Producer
10. The Buyer/ PIS issue NOR prior to arrival the laycan window.
11. Upon the PIS's Vessel Arriving At The Refinery/the Crude Oil Producer' Loading Terminal.
12. The Seller Will Complete The Loading Of Crude Oil Onto Pertamina's Vessel In Accordance With The Spa.
13. After loading is complete, the Seller will issue the following Full POP documents within 24 hours.
(1) Certificate of Quality, Issued By The Refinery/the Crude Oil Producer
(2) Certificate of Quantity, Issued By The Refinery/the Crude Oil Producer
(3) Certificate of Origin, Issued By The Refinery/the Crude Oil Producer
(4) Cargo Manifest, Issued By The Refinery/the Crude Oil Producer
(5) Tanker Ullage Report, Issued By The Refinery/the Crude Oil Producer
(6) Packing List, Issued By The Refinery/the Crude Oil Producer
(7) Tanker Time Sheet, Issued By The Refinery/the Crude Oil Producer
(8) Transfer of ownership Statement Letter, issued by the Refinery/the Crude Oil Producer
14. The Buyer Will Issue The B/l By Pis And Will Complete The Remittance To The Seller Via MT103 after
against B/L Clearance.
15. Upon Confirmation Of The Money Received By The Seller, The Buyer Will Be Permitted To Depart From The
Loading Terminal.
16. The PIS's Vessel Sailing To The Discharge Port According To O The Seller's Instructions And The Next
Delivery Shall Commence According To Same Terms And Conditions Of The Contract.
Quantity Required : 1000000 Barrel/Barrels
Shipping Terms : FOB
Destination Port : United States
Payment Terms : MT103, 100% cash transfer after against B/L clearance, SBLC
2
All instrument multifunction meters shall Measure the
following:
The current, the voltage, active power, reactive power, apparent
power, active energy, reactive energy, power factor and
frequency.
3
Accurate measured values with error limits:
Less than 0.5% for the Voltage (V) and the Current (I).
4
Good legibility with high-contrast:
At least 14 mm SCREEN or LED displays.
5 Electrically isolated current inputs.
6 Four quadrant operations.
7
Connection options:
- Single-phase.
- Or three-phase 3 and 4-wires.
- Suitable for balanced or unbalanced load.
8
Input voltage:
- Phase-to-phase Vp: up to 240 V.
- Programmable (primary and secondary).
9
Nominal input current:
1 A (primary should be programmable)
10 Dimensions:
At least (96 X 96 X ---) mm.
11 Auxiliary supply:
110 ± 10% V DC.
12 Multiple displays:
At least three lines.
13
Outputs:
- Four (4) Analog outputs for (MW, MVAR, V, A) shall be
choosable and programmable using the software tool .
- Each output can be programmed for any quantity.
Contact me/send me your offer via ramzi.v.saba@gmail.com
51
Schedule A - Continued
TECHNICAL PARTICULARS AND GUARANTEES
Item
No
Description
(DATA PARAMETERS REQUIREMENT)
Offered
14
Programmable inputs primary and secondary for C.T, V.T and
the Four required Analogue outputs programmable to any value
inside the required full range:
(-20 mA DC to +20 mA DC).
15 Response time: = 300 ms.
16
The continuous overload rating of the device shall:
1- Shall not be less than 1.3 times rated voltage.
2- Shall not be less than 2 times the rated current.
17
- Programming kit (configuration software + communication
cables) Via Rs 485 port or usb port.
- An additional USB programming port shall be applied.
18
The connection between the device and the RTU in the
substation is done through Modbus/TCP on Ethernet and
Modbus ASCII and Modbus RTU modes with the following
frame structure on RS-485 interface:
- ASCII framing (7-bit ASCII characters).
- RTU framing (8-bit characters)
19
The RS-485 serial communication must have a configurable
range of communication speeds:
- 4800 Bits/seconds .
- 9600 Bits/seconds .
- 19200 Bits/seconds.
With any of the following transmission settings for the RS-485
interface:
- even parity, 1 stop bit
- odd parity, 1 stop bit
- none parity, 1 stop bit
An additional USB programming port shall be applied.
Specifications:
Quantity: 200–300 Tons of UBC Scrap
Kindly share the following details to proceed further:
1. Availability – Current stock volume and lead time
2. Quality – Specification details (cleanliness, percentage of aluminum, any contamination)
3. Packaging – Bale size, weight per bale, and loading method
Please provide a quotation to the following requirement from importer -
Product Name: Anti Drone Module
Specifications:
Type : RF Module
Model : 433M-10W
Specifications : "Working frequency:420-450MHz
Gain:=40dBm
Max output:=40dBm
Output CW saturation power:=10W
Including inside gain flatness:=1±0.5dBm
Working current:=1A
Rf output interface:SMA
VCC Power supply reference:24V-27V
Max Voltage: +30V
Weight:0.1kg
Overall dimensions:82*45*18mm
Operating temperature: -25? ~ +85?"
as per moq
Buyer is interested to receive quotations for the following RFQ -
Product Name: High Quality Noble Kava
Specifications :
Variety: Melo Melo, Borogoru, Vula Kasa Leka, Pouni Ono, Etc.
We Kindly Request Your Assistance In Providing The Following Information:
1. A List Of Currently Registered Kava Exporters Under Baf’s Licensing Program.
2. Details For Each Exporter, Including:
• Company Name
• Pack-house Accreditation Details
• Export License Number(s)
• Contact Information (email, Phone, Website)
3. Any Specific Export Conditions Or Guidelines We Should Be Aware Of For Importing Kava To Ukraine
Packaging Terms : Customized
Specifications :
Require A Recycling Production Line Suitable For LFP & NMC Lithium Batteries.
The Feedstock Will Be De-energised External To This System.
It Will Be Housed Within A 40' High Cube Sea Freight Container. 12m X 2.3m X 2.6m Internal Dimensions
Buyer Require Something Interconnecting And Automatic, Along The Lines Of;
Dual Roller Shredder With Water Mist Spray
Magnetic Separator
Eddy Current Separator
Fine Crusher
Air Separator/classifier
Manual Bagging Machine
information:
• Filling terminal location(s) and loading procedures
• FOB pricing structure
• Port specifications and limitations for LPG tankers
• Applicable port fees
• Laycan: 30 July - 1 August 2025
• Average waiting time at anchorage prior to berthing
• Current vessel congestion or delays (if any)
• Nomination, scheduling, and ETA notice requirement
• Any regulatory, compliance, or logistical requirements (e.g., pump flow rate)
Payment Terms:
Full payment within 5 banking days after inspection (conformity report) by CIQ, SGS, or CCIC at the destination port.
Destination:
Yantian Port, Shenzhen, Guangdong,, China
Looking for suppliers from:
Worldwide
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product: Frozen Chicken Paws
Specifications:
Chicken Paws Grade: Frozen Chicken Paws, Grade A Specifications: • Length: 8–10 cm • Weight: 35–45 g Origin: Brazil Requested Price: CIF USD per metric ton
Quantity: • First shipment: 5 containers as a trial order • Second phase: 100 containers monthly + 5 trial containers • Annual total: 1205 containers
Product Conditions: 1. Weight per piece: 35–45g, max 5% under 35g 2. Broken bones: less than 3% 3. No feathers or blood 4. No stains or black spots 5. No bruises or chemical burns 6. No unpleasant odor 7. Moisture content 3% 8. Chicken paws intact and undamaged 9. Quick frozen in block style 10. Production date within 60 days of shipment 11. Shelf life: 24 months from production date 12. Transport/storage temperature: -18°C 13. Quick-freezing temperature: -40°C 14. All cartons and plastic bags must display SIF number 15. Packaging must meet Chinese entry-exit inspection and quarantine standards 16. Carton labels must follow international format and be approved by Chinese customs and authorities ________________________________________ Payment Method: Upon signing the contract, the buyer shall issue a DLC (Documentary Letter of Credit) from a top-50 global bank. • DLC must be divisible, non-transferable, and irrevocable • Upon receipt of the Bill of Lading, payment shall be arranged between the banks • Final transaction terms will be based on a formal agreement signed by both parties
Quantity Required : 1205 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Yantian Port, Shenzhen, Guangdong,, China
Payment Terms : Full payment within 5 banking days after inspection (conformity report) by CIQ, SGS, or CCIC at the destination port.
Please quote for the following wholesale product requirement -
Product : Wind Turbine
Specifications:
pure wind-to-grid tie inverter solution without solar input.
conditions: Input Source: Wind turbine (AC output). If your inverter needs DC input, we will use an external rectifier.Output: Grid-tie combination AC (single or three-phase)Function: The inverter should convert energy generated by the wind turbine and inject it direct into the utility grid.
-Capacity needed: 5 kW and 10 kW modelsNo solar input needed (This is not a hybrid system - only wind grid connection is needed)Also, please let us know:If the inverter includes MPPT for wind or built-in rectifieration Communication interface (RS485 /Ethernet/WiFi)Lead time,
