Find Verified Eos 2000D Kit (Ef S 18 55Mm Is Ii) Buyers, Importers and Buy Leads

Buyer is interested to receive quotations for the following RFQ -

Product Name: Spare parts kit for CSI 2140 2 Channel Technical Condition Analyzer.

Specifications:
One product package includes:
1 cable for accelerometer 2 PCs
2 accelerometer 2 PCs
2-pole 3 magnet for accelerometer
4 Transport case 1 PCs

5 Set of documentation 1 set.

Design features of the product:

Cable for accelerometer.
The cable is spiral, vibration-resistant, durable, designed to connect the accelerometer to the analyzer. Sealed cable connector with unload tension reduces cable wear.

On one side (one end) of the cable there is a 5-pin M12 plug connector for connection to the analyzer (not explosion-proof). On the other side (second end) of the cable there is a 2-female MIL-DTL-5015 female connector for connecting the accelerometer. Cable length 1,83 m.

2. Accelerometer.

Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.

Accelerometer characteristics:

-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)

-Measurement range ± 50g (± 490 m/s²)

-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)

-Relative transverse sensitivity = 7%

-Voltage/excitation current 18-28 V DC

-Weight = more than 51 grams (1,8 oz)

-Working temperature from-54 °C to 121 °C

-5000G impact overload limit Max. (49050 m/s²)

3. 2-pole magnet for accelerometer.

The magnet is designed for fastening on the accelerometer.

Specifications 2-pole for accelerometer:

-Small magnet;

-Magnet diameter = 20mm

-Magnet weight = 0,15 kg

-6,35mm threaded hole in magnet

-Curved magnet surface.

4. Transport case.

Durable transport case for a set of accessories.

5. set of documentation.

Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.

Note: Must be included at the time of delivery.

The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Kazakhstan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Serikbay Nurmakhambetov

The buyer would like to receive quotations for -

Product : Mitsubishi Fuso Truck Engine Genuine Parts

Specifications:
Gasket, Overhauling, For Mitsubishi Fuso Truck Engine, Part # Me996147
PART # ME996147
INCLUDES THE FOLLOWING:
1. O-RING. ROCKER COVER
2. O-RING, ENG BREATHER
3. GASKET, CYLINDER HEAD
4. O-RING, CYLINDER HEAD
5. GASKET, ENG OIL PAN
6. GASKET, ENG OIL PAN DRAIN PLUG
7. GASKET. ENG OIL FILLER
8. O-RING, ENG OIL FILLER
9. GASKET, ENG RR PLATE
10. GASKET, FLYWHEEL HOUSING RR COVER
11. O-RING. FLYWHEEL HOUSING
12. O-RING, VALVE GEAR TRAIN
13. O-RING. TIMING GEAR TRAIN
14. O-RING. AIR COMPRESSOR
15. GASKET. CYLINDER BLOCK SIDE COVER
16. GASKET, CYLINDER BLOCK
17. GASKET, FR OIL SEAL CASE
18. GASKET, OIL STRAINER
19. O-RING, OIL FILTER
20. GASKET, ENG OIL COOLER COVER
21. O-RING, ENG OIL COOLER
22. GASKET, ENG OIL LINE
23. O-RING, ENG OIL LINE
24. GASKET, T/C OIL RETURN TUBE
25. GASKET, FUEL FILTER
26. GASKET, INJECTION PUMP FUEL FEED PUMP
27. GASKET, FUEL INJECTION NOZZLE
28. O-RING, WATER PUMP
29. GASKET, COOLING WATER LINE
30. O-RING, C00LING WATER LINE
31. GASKET, INLET MANIFOLD
32. GASKET, AIR INTAKE PIPE
33. GASKET, EXHAUST MANIFOLD
34. GASKET, INLET MANIFOLD COVER
35. GASKET, AIR INTAKE PIPE
36. GASKET, EXHAUST MANIFOLD
37. GASKET, T/C
38. GASKET, INTAKE AIR HEATER
39. O-RING, P/S OIL PUMP
40. Front OIl Seal
41. Rear Oil Seal
1 kit
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
2 TUBE, FUEL INJECTOR, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE
PART # AS FOLLOWS
ME151555 (6.35X2.2X635 NO. 1)
ME151556 (6.35X2.2X635 NO. 2)
ME151557 (6.35X2.2X635 NO. 3)
ME151558 (6.35X2.2X635 NO. 4)
ME151559 (6.35X2.2X635 NO. 5)
ME151560 (6.35X2.2X635 NO. 6)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
3 BEARING MAIN, CRANK SHAFT FOR MITSUBISHI FUSO TRUCK ENGINE, PART # ME994204
PART # ME994204 (BEARING SIZE: STD)
COMPLETE SET ( 14 PCS)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
4 BEARING BIG END CON. ROD BEARING, FOR MITSUBISHI FUSO TRUCK ENGINE, PART #
ME994419
PART # ME994419 (BEARING SIZE: STD)
(Complete set 12 pcs)
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 ST
5 PUMP, OIL PUMP ASSEMBLY, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME359718
PART # ME359718
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 EA
6 CORE, OIL COOLER ELEMENT, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME153172
PART # ME153172
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
3 EA
7 PUMP, FUEL PUMP ASSEMBLY, FOR MITSUBISHI FUSO TRUCK FV-517 ENGINE PART #
ME152865 (REMARKS ZEXEL)
PART # ME152865
NOTE: ALL PARTS MUST BE GENIUNE MITSUBISHI
PARTS
1 EA
8 KIT, FOR PISTON, OF MITSUBISHI FUSO TRUCK ENGINE.

Quantity : MOQ

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Pakistan

Payment Terms : Bank Transfer

Looking for suppliers from : Worldwide

Contact : Malik Saeed