Find Verified Api 6A Double Studded Adapter Flange Dsaf Buyers, Importers and Buy Leads

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipe

Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH

DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.

Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings


pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health

Quantity Required : 100 Piece/Pieces

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : full irrevocable confirmed l/c at sight

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

Please provide a quotation to the following requirement from importer -

Product: Petrovalve Petro-valve, Inc

Specifications:
VALVE,CHECK,75-2P,PETRLVLV
Manufacturer PETROLVALVES S.R.L
Manufacturer part number 75-2P
QTY:15

VALVE,PETROVLV,2512,DN200,CL300
Valves, Ball

Nominal size DN200
Design spec, pressure rating CL300
Design spec API 6D, API 607
Length, f to f (e to e) 502
Type of end connection FLANGED
Type of face RAISED FACE
Type of pattern STANDARD
Type of closure member TRUNNION MOUNTED BALL
Type of bore REDUCED BORE
Type of construction THREE PIECE SIDE ENTRY BODY
Type of bonnet/cover NON-EXTENDED BONNET
Type of seat METAL
Type of seat piston SINGLE
Uni/bi-directional BI-DIRECTIONAL
Service(s) SOUR & LOW TEMP.
Mat requirement, sour service PROCESS LIQUID
Temperature, min -50 DEG.C
Temperature, max 220 DEG.C
Emission class B
Mat, body IMPACT TESTED CARBON STEEL
Mat, seals GRAPHITE
Mat spec, body ASTM A350 GRADE LF2 + 316 OVER
Mat spec, insert ASTM A182 F316
Mat spec, bonnet A350-LF2
Mat spec, stem STAINLESS STEEL ASTM A182
Mat spec, trunnion ASTM A182 GRADE F316 + ENP (0
Mat spec, seat ASTM A182 GRADE F316 + ENP (02
Mat spec, spring(s) INCONEL ASTM B637 UNS N07750
Mat spec, bolts/studs ASTM A320-L7M

Mat STEM ASTM A182 GRADE F316 + ENP (02)
SEALS, INSETS & RINGS SPRING ENERGISED LIP SEALS (02)
GASKET - BODY CONNECTOR SPRING ENERGISED LIP SEALS (02)
STEM GASKET PTFE+ELGILOY
MESC code 105-XZV-005
Manufacturer PETROVALVE PETRO-VALVE, INC
Manufacturer part number 2512
QTY:1

Qty: as above

Quantity Required : 1 Unit/Units

Shipping Terms : CIF

Destination Port : Hong Kong

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Andrew

The buyer would like to receive quotations for -

Product Name - Trunnion Mounted Ball Valve

Specifications :-
Body Style / Joint: Side Entry, 2-piece bolted body
Operation: Gearbox handle operated
Finish: Grey painted

Size: 40 inch
Pressure Rating: ANSI Class 600
Port Type: Full bore
Connection Type: Flanged
Facing: Raised face (RF)
Media: Crude oil
Design Temperature Range: -29°C to +120°C

Body and Bonnet Material: Carbon steel, ASTM A105N
Ball Material: Stainless steel, SS F316
Stem Material: Stainless steel, SS F316
Seat Material: Reinforced PTFE (RPTFE)

Design Standard: API 6D
Pressure & Temperature Rating Standard: ASME B16.34
End Flange Standard: ASME B16.47 Series A
Testing Standard: API 598
Quantity - 1

Quantity Required : 1 Unit/Units

Shipping Terms : DDP

Destination Port : Kerkuk Iraq, Iraq

Payment Terms : Bank transfer

Looking for suppliers from : Worldwide

Contact : Younis

Buyer is interested to receive quotations for the following RFQ -

Product: Elevator Parts

Specifications:
Type Of Material Quantity Unit Price Total Qty
70/B Guide Rail ) 60
70 Flange 10
50/B Guide Rail () 60
50 Flange 10
M12 Flange Bolt Set 80
M8 Flange Bolt Set 80
70 Sheet Metal Bracket 80
50 Sheet Metal Bracket 80
M12x90 Steel Dowel 250
6x8 5mm Bracket 40
6x6 5mm Bracket 40
6x6 5mm Counterweight Bracket 40
5mm Counterweight Dowel Bracket 40
M12x30 Bracket Connection Bolts 175
Side Counterweight Shaft Compartment 20
700x2000 Landing Door 81/20
700x2000 Cabin Door 81/20 1
3.9 kW Machine VOLPI MRL-2 630 kg Akis 240x6x6.5 Speed: 1 m/s 1
M12x70 Machine Stud 10
Machine Chassis - Gearless 81/20 1
Including Pulley Guard Sheets 1
ARCUBE 7.5 kW MRL Set ARKEL 1
400 kg Cabin MRL STNE PSL with Mirror and Accessories, 81-20 Spec Base 1
Sheave Pulleys 3
6.5mm Steel Rope 260
6mm Steel Rope 50
6.5mm Rope Clamp 42
6mm Rope Clamp 6
Rope Thimble 14
Rope Holder 2
Rope Cap Sheet 4
Governor Set EN 81-20 with Remote Access Gearless 1
Gearless Counterweight Frame, Length 360 cm 1
Separator Sheet 1.20x2.50 1
96mm Barite Counterweight
7-Stop Surface Mounted Button Set 1
Pradas Butkon 1
Full-Length Photocell EN 81-20 1
36x0.75 Flat Flexible Cable 29
Flexible Pad 3
Digital Cable 100
40x40 Cable Duct 42
14mm Plastic Spiral Conduit 25
18mm Plastic Spiral Conduit 10
0.80 NYAF Cable 600
4 mm Cable 100
1-Pole Terminal Block 3
Mushroom Stop with Guard 3
Buffer Guide Post Set 2
ONPT3 Polyurethane Buffer EN 81-20 1
ONPT1 Polyurethane Buffer EN 81-20 1
40 cm Circuit Breaker Sheet 2
Ladder - 81/20 1
Roller Circuit Breaker 1
Oil Container 4 pcs
Oil Collection Tray 4 pcs
Gearless Safety Gear 2
Electrical Panel 1 pcs
Packaging (Crate) 1- pcs

Qty: as above

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Iraq

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Sermet Mavi