Please provide a quotation to the following requirement from importer -
Product Name: Steel Bars
Specification :
GOST 60S2WA, chemical composition
C: 0.61-0.69%
Si: 1.50-2.00%
Mn: 0.70-1.00%
P: 0.025% max
S: 0.025% max
Cr: 0.30% max
Ni: 0.25% max
Cu : 0.20% max
W : 0.80-1.20%
Sizes : 100 mm and 12-21 mm with 1 mm step
Qty; 1 FCL
Note: Quotations Via Only Email Preferred
Buyer is interested to receive quotations for the following RFQ -
Product: Chamfering & Facing Machines For Steel Bars
specifications:
An automatic double facing & chamfering machine = for Valve bars
Bars faces & bar ends ( both ends ) & to be machined & chamfered in the same time . ?
1- Valve Bar diameters : minimum 5,80 mm – max. 10,50 mm
( Bar diameters Higher than 9,80 mm rarely used )
2- Valve Bar lengths : minimum 55 mm – max. 340 mm
( Bar Length longer than 280 mm rarely used )
3- Valve Bar ( Inlet Valve Material ) Hardness : 26 - 32 HRC
Valve Bar ( Exh. Valve Material ) Hardness : 36 - 42 HRC
Please provide a quotation to the following requirement from importer -
Product Name: Fully Threaded Galvanized Steel Bar
Specification :
40 mm fully threaded galvanized (610 gr/m2) steel bar diameter 15 m total length gr80 type m 6124 pieces
plate 200x200x40 flat for 40 mm bars gr80 800 pieces
Quantity Required : 6124 Pieces
Note: Quotations Via Only Email Preferred
Quantity Required : 6124 Piece/Pieces(sample)
Shipping Terms : CFR/CIF
Destination Port : Istanbul Ambarli, Other-Not Shown
Specifications :
Quantity: need material 1.3355. I will buy 10 tons/year, but firstly for a trial I will buy materials like below.
Q50X1550 mm, 50 pieces(round bar, 50-diameter mm, 1550 =lenght mm) and Q35x1500, 2 pieces round bar. Quality is very important for long-term partnerships.
Please provide a quotation to the following requirement from importer -
Product Name: Busbars
Specifications:
Type: Single Bus Bar, Single Bus Bar With Bus Sectionalized, Main And Transfer Type, Double Bus Bar Double Breaker, Sectionalized Type Arrangement, One And Half Breaker, Ring Arrangement, Mesh Arrangement.
Material: Copper, Brass, Or Aluminum
Size: For Aluminium: 0.7 Amps / 1 Sq.mm of Bar.
For Copper : 1.2 Amps / 1 Sq.mm of Copper
Packaging Terms : Standard
