Specifications :-
Type - Melting scarp, HRC bundles scarp, Free from oil, grease, dirt, paint, coating, and moisture.
A maximum of three (3) varieties of scrap are acceptable:
HRC Bundles
Without any coating
Without any painting
Plate Cuttings / Coil Cuttings
Structural Steel Scrap
Cut to 2 feet and under
Clean structural shapes, crop ends, shearings, or broken steel
Size Requirement
Maximum dimensions: 500 mm , 500 mm 500 mm
Specifications :
4 Ply Liner (Paper+PE + Aluminium Foil + PE) Specification In GSM 48 + 17 + 24 +23 For inner side of Composite Can (like Pringel) Top Lid Called as Tagger of ( Glassin Paper + PE + Aluminium Foil + PE)
2.Product : Tagger
Buyer is interested to receive quotations for the following RFQ -
Product Name: PE Coated Paper
Specifications:
- Product to be used for making disposable paper plates
- Raw material for making disposable paper plats and cups
Packaging Terms : Standard
Specifications:
1. Aluminium Plate Dimenssion (mm)
L-110 W -25 T-2
Volume -1000000 Nos & 200000 Nos
Coating Required - one Side of Plate Only.
COating Thickness - 30 Micron
Coating Composition -“4x Protect Coating” - Resin ceramic coating with 0.5% titanium, 0.1% tourmaline, 2.5% Zonyl, and 3.0% Anti static powder added to the mixture (%’s are by weight).
2. Aluminium Extruded Plate
L -120 W-27 & T-2
Volume -200000 Nos
Coating Required - one Side of Plate only
Coating Thihckness - 10 Micron & 30 micron
Coating Composition - high-end CeraSOL ceramic with embedded additives that when heated, rise to the surface for transfer onto the hair. Additives are 0.4% PMX-200 Silicone Fluid, 1.0% Coconut, 4.0% CeraSOL silicone oil (%/s are by weight)
Coating Thickness -30 Micron
Buyer is interested to receive quotations for the following RFQ -
Product Name: Conformal Coating Material
Specifications:
Conformal coating material in Silicone and PU
· Chemical resistance: The material should be able to withstand exposure to various chemicals.
· Thickness: The material should have a consistent thickness to ensure proper coverage.
· Adhesion: The material should adhere well to the surface of the component being coated.
· Durability: The material should be able to withstand the rigors of the application environment.
· Application: The material should be easy to apply and not cause any damage to the component being coated.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Scrap
Specifications :
Type: Aluminium Wire Scrap (unalloyed)
Material Composition 99.5%+ Aluminum (Al)
Type Pure Aluminum Wire Scrap (unalloyed)
Purity Min 99.5% – 99.7% Al
Wire Diameter Varies (typically 1–10mm)
Insulation/coating Free From Insulation (unless Specified)
Oil/dirt/grease Nil
Moisture Content nil (dry, Free From Water)
Non-aluminum Content Max 0.5–1% (no Iron, Steel, Or Plastic)
Radioactive Material Not Allowed
Hazardous Material Not Allowed
Paint/coatings Not Allowed
Packaging In Bales, Or Compressed Bundles
Test Certificate For The Material Composition: Required
Inspection By Us/ Third Party : Required
