We are looking to source Intel Pentium Pro ceramic processors for import into Egypt. Buyers seeking vintage or legacy Intel Pentium Pro ceramic CPU units are invited to connect with qualified suppliers worldwide.
GRADE / TYPE : Intel Pentium Pro Ceramic Processors
QUANTITY : Minimum 1 Twenty-Foot Container
REQUIREMENTS : Please send product pictures, specifications, available stock details, and your best quote.
Interested suppliers with stock of Intel Pentium Pro ceramic processors are encouraged to respond promptly.
Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Specifications:
The Analysis
Al / min - / max 75
Si/min -/ max 0 ,3
Fe / min - / max 0,25
Cu / min - / max 0,02
Mn/min - / max 0,01
Mg/ min - / max 0,002
Cr/ min - / max 0,02
Ni / min 24 / max 26
An/ min - /max
Buyer is interested to receive quotations for the following RFQ -
Product Name: Used Laptops
Specifications :
Brands And Models
Zbook 15 G2 & G3 & G4 & G5
Hp Hp840
Hp 850
Hp 450
Hp 650
Hp 745 G3
Hp 7r5 G4
Hp 1030
Hp 1040
Hp 1050
DELL 6520
DELL6530
DELL6540
DELL5510
DELL5520
DELL5530
DELL5540
DELL 3510
DELL3590
DELL7510
DELL7520
Specifications:
- Aluminum Fins For Finmaster, Alloy 1100, H22, Mill Finish, Thickness 0.12mm, Each Coil Dimension
- I.D. 152mm ( Aluminum Core Or Fiber Core )
- O.D. 700mm Max.
- Max. Weight Per Coil 600 KG
Qty 13 Tons: SIZE 430 mm WIDTH X 0.12 mm THICK
Qty 12 Tons: SIZE 540 mm WIDTH X 0.12 mm THICK
