This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Silica Sand
Specifications :
High-purity Silica Sand Under A One-year Supply Contract
Chemical Requirements
SiO2: 99.20%–99.70%
Fe2O3: Maximum 0.030%
Cr2O3: Low
TiO2: Trace
Al2O3: 0.10%–0.40%
Moisture: Maximum 3.00%
Particle Size
The Silica Sand Must Comply With The Required Grain Size Distribution Based On ASTM E11 and BS 410 Sieve Standards, Including Retained And Through-sieve Conformity Limits
Based On Your Product Listing, Your Silica Sand Appears Promising, Particularly With:
SiO2 up to 99.9%
Low Iron Content
Production Capacity Of 20 Million Tonnes Per Year
FOB Supply From Indonesia
Could You Kindly Confirm:
Whether Your Product Can Fully Comply With The Above Specifications.
Whether You Can Provide The Corresponding Sieve Analysis In Accordance With ASTM E11 / BS 410.
Your latest Technical Data Sheet (TDS) And Certificate Of Analysis (COA).
Your best FOB Pricing For This Requirement
Your Available Monthly Production And Export Capacity.
Whether You Are Interested In Discussing A Long-term Annual Supply Arrangement
Should Your Product Meet The Technical Requirements, We Would Be Pleased To Proceed With Further Discussions
Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Please provide a quotation to the following requirement from importer -
Product Name: Silica Sand And Gravel Silica
Specifications:
e your best price for silica sand and gravel silica size : 1.2-2.2mm calculated bulk density : 1.6 particle density : 2.65 Quantity : 857000 kg delivery : BEKASI & CIBEET SITE SIZE : 4-8MM Quantity : 1900 Kg required delivery progressively by August - October Your immediate response is appreciated.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Silica Sand
Specifications :
1. The Required Standard (silica Sand With Sion Above 99.6, Below 1 .5mm Or Smaller Particle Size And Fe,os Below 0.02)
2. Principal Company Name And Info For Dealing With The Above Said Silica Sand
3. H.S. Code For Exporting
4. Silica Sand Mining License
5. Silica Sand Export License (K2)
6. Previous Documents Similar To Those Exported (Silica Sand)
7. Local Testing Reports
8. Information On Ports
9. Other Relevant Environmental Documents
Please provide a quotation to the following requirement from the importer -
Product Name: Silica Fumes
Specifications:
1- The silica fume containing at least 85 percent silicon.
2- Silica fume should comply with ASTM C1240.
3- Chemical analyses to give the percentages of:
SiO2
CaO
Al2O3
Fe2O3
4- The percentage of particles greater than 44 mm.
5- The project is a water supply tunnel, silica fume will be for Insitu concrete lining to tunnel.
Packaging Terms : 20' containers of 20 tons of 20 big bags each .
