This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Please provide a quotation to the following requirement from importer -
Product Name: Hydraulic Tipper Kit
Specifications:
Request For Quotation
Variant B — Dc 12v Electric Power Unit System
Application LCV Tipper Body | Body length: 2,800–4,000 mm | 3-way tipping (rear / left / right) | Max load: 5,500 kg
Drive System DC 12V Electric Motor – No PTO required – works on any vehicle with 12V battery
Target Price = USD 310 FOB per complete kit
Certification CE Declaration + ISO 9001 MANDATORY – non-certified products will not be evaluated
TECHNICAL OVERVIEW:
• Motor: DC 12V, min 2.2 kW (recommended 2.5 kW), duty cycle S3-20% | Current draw at full load: ~200 A
• Pump: 2.5–2.7 cc/rev (nominal 2.60 cc/rev) | Flow at 2,800 RPM: ~7.3 L/min
• Tipping time: ~95 seconds for 11.5L cylinder at 200 bar (acceptable for LCV intermittent duty)
• Lifting verification: Last stage Ø ~60 mm at 200 bar = 0.785 × 60² × 200 / 10,000 = 56.5 kN = 5.76 tonnes > 5,500 kg
VARIANT A — PTO GEAR PUMP SYSTEM
LCV Tipper Body | Body length: 2,800–4,000 mm | 3-way tipping (rear / left /right) | Max load: 5,500 kg
PTO (Power Take-Off) from vehicle gearbox – DIN 5482 spline shaft
= USD 325 FOB per complete kit
CE Declaration + ISO 9001 MANDATORY – non-certified products will not be evaluated
PTO GEAR PUMP – VEHICLE GEARBOX DRIVEN
Gear pump – PTO driven (bidirectional) - complete set with manual coupling cable + handle - as in the image - for quotation use the gearbox code for Iveco Daily: 5803269191 / FT50.6M / 2840.6 -- Displacement: 14–18 cc/rev (nominal 16.4 cc/rev) | Max continuous pressure: = 280 bar | Rotation: bidirectional (CW and CCW) | Shaft: DIN 5482 spline (Ø 22×19, Z13) | Inlet port: G 1/2" BSP | Outlet port: G 1/2" BSP | Speed range: 450–2,200 RPM | Flow at 750 RPM: ~12 L/min ? tipping time ~55 sec for 11.5L cylinder | Ref: IPH BPS 16, code 20BPS01601X000, displacement 16.4 cc/rev, weight 5.8 kg | Dimensions: A=111 mm, B=151 mm | Mounting: 3 bolts Ø 11 mm
PTO drive coupling bushing (buc?a de cuplare) -- Couples vehicle PTO output shaft to gear pump DIN 5482 shaft | Material: hardened steel | Specify PTO shaft type compatibility in Notes (most common: SAE 6-spline, DIN 5462) | Ref: current EU supplier = 15 €
