This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Please provide a quotation to the following requirement from importer -
Product Name: Stainless Steel Pipe Fittings Like High-Pressure Pipe Clamps And Leak Repair Fittings
Specifications:
Types: High-Pressure Stainless Steel Water Pipe Clamps, Leak Repair Fittings, Jointing Fittings
Body Material: Stainless Steel
Manufacturing Technique: Casting
Size: 250 Mm To 500 M
Standard: European Standard Product
Application: Water Pipe Leak Repair And Jointing
Specifications:
We are looking to source stainless steel wire (SS 410 grade) with a diameter of 0.13mm. Suppliers of SS wire, stainless wire, austenitic/martensitic stainless steel wire rod, and fine gauge wire are welcome to respond.
GRADE / TYPE : Stainless Steel 410 Grade
SIZE / SPEC : Diameter 0.13mm
QUANTITY : 25 Ton/Tons
PACKAGING TERMS : 15 KG/Spool (excluding spool weight), wrapped in plastic film; 2 spools per carton separated by paper carton sheet to avoid collision and damage to plastic spool; palletized on wooden pallets with complete pallet wrapped in plastic bubble sheet for extra protection
REQUIREMENTS : Please send product specifications, certifications, mill test reports, catalog, and your best quote.
Interested suppliers meeting the above specifications are encouraged to respond promptly.
Packaging Terms : 15KG/SPOOL (EXCL. SPOOL WEIGHT) WRAPPED IN PLASTIC FILM, 2 SPOOLS/CARTON Separated By Paper Carton Sheet, Stacked On Wooden Pallets, Full Pallet Wrapped With Plastic Bubble Sheet
Packaging Terms : 15KG/SPOOL (EXCL. SPOOL WEIGHT) WRAPPED IN PLASTIC FILM, 2 SPOOLS/CARTON SEPARATED BY PAPER CARTON SHEET, STACKED ON WOODEN PALLETS, FULL PALLET WRAPPED WITH PLASTIC BUBBLE SHEET
Please provide a quotation to the following requirement from importer -
Product Name: Stainless Steel Pipes
Specification :
Raccord Inox 303
Details:
I Would Like A Price Offer For Machining Stainless Steel 303.
With A Delivery In France.
Cordially
Attachments
HS Code: 730640
Please quote for the following wholesale product requirement -
Product Name: Stainless Steel Pipes
Specifications:
Super thinned Stainless steel tubes 32
Category:
Stainless Steel Pipes
Quantity:
50000 Piece/Pieces
PRODUCT SPECIFICATIONS
**Initially need sample **
--------------------------------
1. MATERIAL
Welded stainless steel tube, grade AISI 304 (EN 1.4301), produced in compliance with EN 10296-2 or equivalent standard.
2. DIMENSIONS
* Outer diameter: 32 mm
* Wall thickness: 0.4 mm
* Cut lengths required:
– L. 250 mm ? approx. 50,000 pcs/month
– L. 300 mm ? approx. 5,000 pcs/month
– L. 500 mm ? approx. 5,000 pcs/month
3. CUT & FINISH
Tubes must be cut to the exact lengths specified above. Both ends must be deburred and free from any sharp edges or burrs.
4. SURFACE FINISH
External surface: polished finish. Please indicate the Ra value or grit equivalent achievable.
5. TOLERANCES
Please provide your standard production tolerances for outer diameter, wall thickness, length, and straightness. Any applicable norms or internal standards should be referenced.
6. END USE
These tubes are intended for sanitary drainage applications (siphons/waste fittings for bathrooms and kitchens).
7. PRE-PRODUCTION SAMPLES
Before placing a regular order, we require a pre-production sample batch for quality approval. Please indicate sample lead time and any related costs.
8. PACKAGING
Tubes to be packed in cardboard boxes, loaded on standard wooden pallets. Please specify box dimensions, quantity per box, and gross weight per pallet.
9. DELIVERY TERMS
Quotation requested on FOB basis. Please indicate the nearest port of shipment.
--------------------------------
INFORMATION REQUESTED
--------------------------------
Kindly include in your quotation:
* Unit price (FOB) per piece, broken down by length
* Minimum order quantity (MOQ) per length and overall
* Standard lead time for regular orders
* Sample lead time and cost
* Production tolerances (OD, WT, length)
* Achievable surface finish (Ra or grit)
* Port of shipment
* Payment terms
* Material certification available (EN 10204 2.2 / 3.1)
Please provide a quotation to the following requirement from importer -
Product Name: Stainless Steel Pipes
Specifications :
Product Basic Information
Super-Thinned stainless steel tubes Ø 32
Category: Stainless Steel Pipes
Quantity: 50000 Piece/Pieces
Product Specifications
--------------------------------
1. Material
Welded stainless steel tube, grade AISI 304 (EN 1.4301), produced in compliance with EN 10296-2 or equivalent standard.
2. Dimensions
* Outer diameter: 32 mm
* Wall thickness: 0.4 mm
* Cut lengths required:
– L. 250 mm approx. 50,000 pcs/month
– L. 300 mm approx. 5,000 pcs/month
– L. 500 mm approx. 5,000 pcs/month
3. Cut & Finish
Tubes must be cut to the exact lengths specified above. Both ends must be deburred and free from any sharp edges or burrs.
4. Surface Finish
External surface: polished finish. Please indicate the Ra value or grit equivalent achievable.
5. Tolerances
Please provide your standard production tolerances for outer diameter, wall thickness, length, and straightness. Any applicable norms or internal standards should be referenced.
6. End Use
These tubes are intended for sanitary drainage applications (siphons/waste fittings for bathrooms and kitchens).
7. Pre-production Samples
Before placing a regular order, we require a pre-production sample batch for quality approval. Please indicate sample lead time and any related costs.
8. Packaging
Tubes to be packed in cardboard boxes, loaded on standard wooden pallets. Please specify box dimensions, quantity per box, and gross weight per pallet.
9. Delivery Terms
Quotation requested on FOB basis. Please indicate the nearest port of shipment.
--------------------------------
Information Requested
--------------------------------
Kindly include in your quotation:
* Unit price (FOB) per piece, broken down by length
* Minimum order quantity (MOQ) per length and overall
* Standard lead time for regular orders
* Sample lead time and cost
* Production tolerances (OD, WT, length)
* Achievable surface finish (Ra or grit)
* Port of shipment
* Payment terms
* Material certification available (EN 10204 2.2 / 3.1)
