This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
More Items Similiar to: Wanted : Metal Working Fluid Additives
Buyer is interested to receive quotations for the following RFQ -
Product Name: Industrial Metal Working Fluids
Specifications:
Fluid Polydimethylsiloxane
Standard And Technical Specifications
PDMS 100% Fluid Silicone For Chemicals Raw Material
Packaging Terms : Standard
Please quote for the following wholesale product requirement -
Product Name: Metal Working Machine Like Hardbanding Unit
Specifications :
• All steel skid fabrication approximately 6’ long x 4’ Wide x 7’ High Collapsed with open operator area.
• Unit weighs approximately 3300# as shipped.
• Unit has adjustable, pin able stiff legs with pinch bolts that adjust to pipe rack height.
• Unit has four each Hydraulic powered drum rollers to rotate from 3 ½” O.D. Drill pipe to 10” O.D. Collars, As well as center wear pad on Hevi Wate Drill Pipe.
• Drum Rollers are 6” O.D. x 8” Long. Two below pipe and two above pipe applied with hydraulic pressure.
• Hydraulic conveying system to move pipe in/out of grinding area, mounted on moveable exterior jack.
• Two exterior jacks with 750lbs ball transfer rollers.
• One jack is used with hydraulic conveying system to move Drill pipe from racks to and from the machines grinding area.
• The other jack is used behind machine for center wear pad on Hevi Wate Drill Pipe.
• All Hydraulic jack cylinders have 12” stroke with adjustable legs.
• Hydraulic tank is 35 gallons, 6 gpm @ 1000 psi with heat exchanging fan and radiator.
• Grinder:
- 14” O.D X 3 ¼ wide or 14” OD X 1 1/2” wide Grinding Wheel.
- Grinding wheel moves up and down 14” and 12” left to right.
- Grinding Wheel can tilt hydraulically for 18-degree area repair.
• Unit is electric over hydraulic powered,460-volt 3ph 60 hertz or customers shop power.
• All operational controls are at operator’s fingertips
The buyer is interested to receive quotations for the following RFQ -
Product Name: Metal Engraving Marking Machinery
Specifications:
Name: Pneumatic engraving machine
Marking Speed: 30-40mm/s
Marking Depth: 0.1-2mm (depends on the different materials)
Marking Area (mm): up to 300mm x 200mm
Up and down lifting height: 0~300mm
Material hard request: Below HRC60
Whole machine power: 500W
Power supply: AC100V- 240V 50Hz/60Hz
Airpower: 0.3~0.6MPa
Marking Type: Pin Making Machine
Condition: New
