Wanted : Ductile Iron Pipes Fittings And Valves

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipe

Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH

DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.

Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings


pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health

Quantity Required : 100 Piece/Pieces

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms : full irrevocable confirmed l/c at sight

Looking for suppliers from : Worldwide

Contact : Ramzi Saba

Buyer is interested to receive quotations for the following RFQ -

Product Name : Fittings

Specifications :
Type : Valves, Flanges, Couplings etc.
Different Sizes

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Kuwait

Payment Terms : LC/TT

Looking for suppliers from : Worldwide

Contact : Prakash

Please provide a quotation to the following requirement from importer -

Product Name : Fittings

Specifications:
Type : Pipe, Pipe Fittings
Industrial Use

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CNF

Destination Port : Doha, Qatar

Payment Terms : TT against BL

Looking for suppliers from : Worldwide

Contact : Mr. Mohammed Ghufran

The buyer would like to receive quotations for -

Product Name: D.i Pipe And Fittings

Specifications:
Type: Hand Pipes, Metal Pipes, PEX Pipe,
Fitting Type: Elbow, tee type connectors, Coupling
Material: SS, Carbon steel, Plastic

Quantity Required : MOQ

Shipping Terms : FOB / CIF

Destination Port : Spain, Spain

Payment Terms : LC/TT

Looking for suppliers from : Worldwide

Contact : Raul

Please provide a quotation to the following requirement from importer -

Product Name : Ductile Iron Covers

Specifications:
Material : Ductile Iron
Size : Standard (Customized)

Quantity : MOQ


Quantity Required : MOQ

Shipping Terms : FOB

Payment Terms : TT

Looking for suppliers from : Worldwide

Contact : Mr. Maximo

Please provide a quotation to the following requirement from importer -

Product Name: Ductile Iron Pipes

Specifications :
Ductile Iron Spun Pipes(E Sealed) Details As Inv(Gst Tax Inv No.ci2000000341 342 343 347 353Dt.14.04.19
Made Of Cast Iron

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Singapore

Payment Terms : DP

Looking for suppliers from : India, China

Contact : Dhazin

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipes

Specifications:
1) DI Pipe - 1500 mtrSize- 6 Inch, Pressure - 40 Bar, K9 Socket2) 6" Washout Valve (PN-40)- 1 No3) 6" Butterfly Vale (PN 40) - 1No4) 6" Double Orifice Air release valve (40 Bar) - 1 No5) 6" DI Tee (40 Bar, Flange Type)- 3 Nos6) 90 Deg 6" DI Elbow (40 Bar, Flange Type)- 2 NosREGARDS
Certification:WARS,BSI,ISO
Joint Type:T type / K type / Flange type
Internal coating:Portland
External Coating:Zinc + Bitumen Painting
Coating: Metallic zinc coating + Bitumen complying with ISO8179
Joint structure: push-in, Push in with restrained groove, mechanical joint, flange type
Test:100% Water Pressure Test
Product name: Iso2531 C25 C30 C40 Ductile Iron Pipe
Application: Water supply pipes, drainage pipes,etc.
Transportation: Bulk vessel or container
Shape: Round
Material: Ductile Iron
Place of Origin: CN;SHX
Brand Name: Solid
Length:5.7m,6m
Standard: ISO2531/EN545/EN598
Application: pipeline
Hardness:= 230HB

Quantity Required : 1500 Meter/Meters(sample)

Shipping Terms : CIF

Destination Port : Oman

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Yis Hak Teklezghi

The buyer would like to receive quotations for -

Product Name: Ductile Iron Pipe

Quantity Required : 3500 Meter/Meters

Shipping Terms : CIF

Destination Port : India

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Sujit Mahato