Specifications:
1: Long range Indicator calibrator
Indicator calibrator optimar 25 with digital readout.
Application: for both analog dial indicator, dial comparator, level type test indicators & digital indicators.
Measuring range: 25mm
Resolution: 0,1um (0.0001mm)
Accuracy: 0+/- 0.2um
Power Supply: (220-240 VAC), 50Hz
Long clearly readable LCD monochrome digital display.
Selectable for either Metric or Inch
Output: USB interface for PC, RS232 Interface
Inspection Program: QN Software/dial – 32 with laptop and printer
Accessories: all operational accessories
Footswitch for data transfer supplied with calibration certificate issued by a laboratory accredited (including the calibration error and uncertainty)
List#4 Standard Glass Scale
High precision glass scale
Accuracy: 0.005mm
Line width: 0.005mm
Measuring range: (0-300mm)
Wooden Case
Calibration Certificate from national metrology institute (NMI)(VSL, PTB, NPL)
List#5 CERA Caliper Checker
Specification:
Wrung high-grade CERA gage blocks in a protective casting
Range: 0-600mm
Accuracy of block pitch: +/-0.005mm
Parallelism of block pitch: 0.005mm
Calibraton Certificate from accredited lab.
List #6 measuring tape and rule calibrator
Calibration unit for checking scales rule and measuring tapes with 0.001 mm resolution
Clamping range: upto 2000mm,
Drawer load range: 20n – 50N
Measurement uncertainty: ((0.05)^2 + (0.005L)^2)^0.5 where L: M
The instrument should be supplied with the required computer, software and accs.
Supplied with calibration certificate from national metrology institute (UME, vsl, or NPL)
List#8 Standard Thickness Foil
Standard block for calibration coating thkness gauge.
Range: (from 0.001 – 1)mm
Calibration certificate from accredited lab.
List #9 Precision Electronic Level
Wireless talyvel 6 electronic precession
Level flatness measurement with PC and Software
Measuring range: 1600s
Resolution: 0.1 arc-sec
Accuracy: +/-0.2sec
Power: 220VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List# 10 Small angle Generator
Used for calibration of angle measurement device (sprit level, electronic levels and autocollimators)
with software and PC
Range 1m SAG
Uncertainty measurement = 1 arc second.
Power: 220 VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List #11 Handheld, calibrator (process calibrator with portable pressure calibrator)
Measurement and electrical pressure generation at the touch of a button with integrated pump
From -0.8..+20bar (11.6..+290psi)
Accuracy: 0.025% of reading +/- 0.01% FS(including calibration certificate)
Generation/measurement of 4…20mA, 24V voltage supply to power transmitter
Pressure supply via external compressed air-line
With calibration certificate from national accredited lab.
List# 12 Process Calibrator
With Hydraulic handheld pressure with integrated medium reservoir & ergonomic handling
With hydraulic hand spindle pump with function for calibration & pressure switch test
Range: 0-1000 bar
Accuracy: 0.05% FS
Medium: non-corrosive gases, liquids, water
With complete 4 test and service cases
With refence pressure sensor (interchangeable without tools) 1.2m
With Calibration Certificate from national accredited lab
List #13 mechanical vacuum pump
Minus 1bar (220V 50Hz)
With Calibration Certificate from nationally accredited lab
List #14 High Performance Pressure Generation and Control 200MPa PPCH
Precision: to 0.003% of Q-RPT span.
Volume: 0-100cc, 50cc optimum, operated in larger volumes but pressure stabilizing time increases
Dynamic Mode typical time to ready
180sec into a 50cc volume & 20% FS excursions with default hold-limits 1.0 MPa (150psi) (lower in optimum conditions and with PG7302.
RS232 Cable, 9-in 2m for PPC3 COM1 or PPC3 to RPM4 connection
This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Used Poultry Equipment
Specifications:
Vega Feeder And Automated Nipple Drinker For Breeder Chicken (growing Mother Chicken) Farm.
Category: E3
Quantity Required : Line Of Product,
Feeder: 1000 Meter Line
Drinker: 500 Meter Line
Product Name : Earthing Material Illumination System, Conductor And Electrode
Specifications :
Types and specifications:
'Required 120 Sqmm Stranded bare Cu conductor Meter 8,320
120 Sq.mm Cu bare conductor for Equipment Meter 2,920
120 Sq.mm Cu bare conductor for Trench & Control Room RM 2,100
Copper Coated Steel Earth Rod Electrode (14mm dia, 2.5 mtr length) with Concrete inspection chamber and disconnecting/testing link Nos. 51
Bentonite Powder / MFC-20 compound (50 Kg Bags) Bags 23
M12 Lugs for earthing conductors Nos. 138
Graphite Moulds and accessories like Weld powder, ignitor powder, flint gun, scraper, handle clamps LOT 2
T Joints and X Joints for earth grid formation and crossover Exothermic Type Lot 2
NOTE: Suppliers From Spain Only Preferred
Product Name: Equipment for Hot-Rolled Bar Production Line Machinery
Specifications:
Complete Production Line Machine / Equipment Or Individual Components Required For The Production Of A Specific Detail - A Hot-rolled Trapezoidal Bar Made From 42crmo4 Material,
-with An Initial Low Production Target Of One Ton Per Hour.
- Considering Initially Rolling From Round Bars Of 85-95 Mm Diameter Or Rectangular Bar With Cross-section Of 65/75 Mm, Or Any Other Dimensions You May Propose.
- Facility Will Have A Furnace With A Length Capacity Of Up To 2,5 Meters. The Rolled Bar Will Undergo Hardening And Tempering Processes To Achieve The Desired Impact Resistance Parameters Of Kv Above 50 J/cm2 And Hardness 280 – 320 Hb.
- Specifically Interested In A Simple, Cost-effective, And Low-budget Approach To Obtaining These Details.
- Would Prefer Solutions Based On Dedicated Three-roll Mills.
1 Complete Production Line
Please quote for the following wholesale product requirement -
Product Name : Asphalt Plant & Machineries
Quantity : Required Items
# Equipment/Machinery UOM QTY
1 Motor Grader NOS 1
2 Asphalt mix plant NOS 1
3 Bitumen Sprayer NOS 1
4 Paver NOS 1
5 Mini Paver NOS 1
6 Roller (Two Drum) NOS 1
7 Ride on Compactor NOS 1
8 Pneumatic Roller NOS 1
Asphalt Paver - Mini
Specification
General
A brand new mini wheeled asphalt paver of reputed make that built for small size
road paving.
Year of manufacture must not be older than five years
Engine
Should be of a reputed make
Diesel engine with direct injection system.
Screed
Should be able to pave minimum of 300mm walking paths
Maximum working width should not be less than 1.0 meter
Feeding System
Hopper capacity should not be less than 0.5 cubic meter
Auger control should be automatic.
Operation
Should be a wheeled paver
Theoretical paving capacity not less than 12 t/h
Maximum placement thickness not less than 150mm
Paving speed not less than 15m/min
Open hopper width should not be more than 1.5 m
Documentation
Parts Catalogue in English should be supplied
Maintenance Manual in English should be supplied
Operators Manual in English should be supplied
Asphalt Paver – Medium
Specification
General
A brand new compact wheeled asphalt paver of reputed make that built
for small to medium size road paving.
Year of manufacture must not be older than five years
Engine
Should be of a reputed make
The diesel engine must have direct injection system, turbocharged and
watercooled
Rated power should not be less than 50kW
Screed
Maximum working width should not be less than 3.0 meter
Screed must be equipped with tamper & vibration
Feeding System
Hopper capacity should not be less than 5 tonne / 3m3
Conveyor must have automatic control and limit switches.
Auger control should be automatic with ultrasonic sensors
Paver Controller and
Dashboard
Automated monitoring system for paving and system should provide
feedback to operators.
Automated monitoring system should be able to control functions for
precise results
Automated functions such as paving parameters, memory, and crown and
slope settings
Display on dashboard to provide constant feedback to operator
Operation
Should be a wheeled paver
Theoretical paving capacity should not be less than 200 t/h
Maximum placement thickness should not be less than 200mm
Maximum paving speed should not be less than 20m/min
Open hopper width should not be more than 3.2 m
Documentation
Parts Catalogue in English should be supplied
Maintenance Manual in English should be supplied
Operators Manual in English should be supplied
Bitumen Spray Truck
Specification
General
A brand new bitumen spray truck of reputed make that is built for small to medium
sizes road
Year of manufacture must not be older than five years
Engine
The diesel engine has to have direct injection system, turbocharged and
watercooled
Rated power of minimum 16kW
Tank Capacity Capacity should be minimum 4000 Liters
Spray Bar
Standard width not less than 2.0 m
Maximum width not less than 4.0 m
Pump
2” x 2” Size positive displacement gear pump or equivalent
Output of minimum 300 L/ min.
Air Compressor Standard make 2-cylinder air compressor
Documentation
Parts Catalogue in English should be supplied
Maintenance Manual in English should be supplied
Operators Manual in English should be supplied
Compactor (3-5T) Ride on
Specification
General
A brand new ride on compactor of reputed make that built for compaction.
Year of manufacture must not be older than five years
Operating Weight should be between 3000kg to 5000kg
Engine The engine net power has to be minimum 30kW
Compaction
Hydrostatic adjustable 2 different centrifugal forces shall be provided
The front and rear drums should drive hydrostatically
Drum Width shall not to exceed 1400mm
Factory fitted pressurized auto sprinkling system.
Doc
