This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Please quote for the following wholesale product requirement -
Product: Semiautomatic Plating Equipment with Overhead
Specifications:
Category:
Metal Coating Machinery
Product specifications:
• Type: Semiautomatic plating equipment
• Structure: Overhead gantry (crane) system for automated rack movement
• Number of tanks: Multiple compartments for sequential plating processes
• Material: Tanks and piping constructed from corrosion-resistant plastic (likely polypropylene)
• Operation: Mechanized movement of racks, controlled via motorized overhead system
• Application: Suitable for electroplating, metal finishing, and surface treatment
• Capacity: Medium-scale plating (refer to attached image for approximate dimensions)
• Safety: Basic safety railings included around equipment
• Installation: Floor-mounted, industrial design for indoor use
• Power supply: Electrical motorized drive for gantry operation
Service Requirements:
• Please provide product quotations and relevant details for the equipment specified above.
• We are looking forward to your quotations.
Attachments
We require machines configured for the following candle sizes:
Machine Candle Specification
Machine 1 22.2 mm diameter × 325 mm length
Machine 2 25.4 mm diameter × 325 mm length
Machine 3 Tapered candle: 35 mm base, 45 mm max diameter, 50 mm height
Each machine will be dedicated to one size.
3. Maximum Mould Capacity
For each of the above candle sizes, please confirm:
number of mould rows
number of mould tubes per row
total number of mould tubes per machine
Please present clearly, for example:
4 rows × 24 moulds = 96 moulds
4. Machine Type
We require manual or semi-automatic machines that are:
robust and durable
simple to operate
easy to maintain
suitable for continuous daily production
5. Cooling System
Machines must use water cooling.
Please confirm:
cooling system design (water tank or circulating system)
water inlet and outlet connection sizes
compatibility with external water chiller
recommended water flow rate (L/min)
operating water temperature range
Our factory uses chilled water at approximately 10–20°C.
6. Production Performance
Please provide:
cycle time (minutes per cycle) for each candle size
candles produced per cycle
typical output per hour
demoulding method (mechanical push, air pressure, etc.)
suitability for candles up to 325 mm length
9. Machine Specifications
Please provide:
machine dimensions
machine weight
number of mould rows
electrical requirements (230V / 50Hz)
installed power
10. Technical Documentation (Required)
Please provide:
photos of the machine
video showing the machine in operation (pouring, cooling, demoulding)
top-view photo showing mould layout
drawing or diagram of cooling system
11. Manufacturing Information
Please confirm:
factory location
whether moulds are manufactured in-house
photos of workshop and production facilities
12. Quotation
Please provide:
unit price per machine
price of mould sets
spare parts pricing
packaging details
shipping dimensions and weight
Qty: Our initial order will consist of three machines, each configured for a specific candle size. Additional machines may be purchased following successful implementation.
Please confirm:
production lead time
estimated shipping time
installation requirements
initial order will consist of three units
Please provide a quotation to the following requirement from importer -
Product Name: Industrial Supplies
Specifications :
Type: Potable Water Pump Solutions, Marine And Seawater Cooling Pumping Systems
Size: Standard
Rotary And Pump Solutions, Supply Tailor Made Maintenance Programs And Supply Specialty Products For Optimizing Operations For Mechanical Plants Within A Variety Of Engineering Fields
Specifications:
Universal Model (all body lengths 2,800–4,000 mm)
Telescopic hydraulic cylinder – single universal model -- Telescopic hydraulic cylinder – single universal model
End-of-stroke limiter / limit switch device (electric switch) - MANDATORY – stops tipping at set angle regardless of body length | Must be adjustable to set correct tipping angle for bodies 2,800–4,000 mm | Integrated into cylinder or external mechanical/electrical limit device | When activated: cuts hydraulic pressure / closes solenoid to stop extension | Ref: current EU supplier = 18 € | Include: 2D drawing, adjustment procedure, electrical connection diagram
Hose burst valve (explosion-proof / anti-drop safety valve) -- Prevents uncontrolled lowering if hose fails | Inline or integrated in cylinder sleeve | Rated 200 bar | Thread: G 1/2" BSP | Ref: Penta option sleeve B6G012043 | Include if not already in item 1.1
Cylinder Mounting System
Cradle / balancing bracket – 3-way tipping -- For 3-way tipping: rear / left side / right side | Heavy-duty welded steel | Max load capacity: = 11 tonnes | Allows body rotation left–right and front–rear at ±30° | SINGLE model compatible with item 1.1 cylinder base | Ref: Penta cradle A5L080001 (L120 series): 11.5 kg, max 11 ton, footprint ~360×280 mm | Include 2D drawing with bolt pattern, pin dimensions
Cylinder support pair (upper clamp brackets) - integrated in the cradle - Pair of clamps to support cylinder body on sub-frame | Fit cylinder outer Ø (match item 1.1) | Bolt-on, no welding | Ref: Penta A70045001 (L120 series) | Include 2D drawing
Cradle support pair (lower pivot brackets) -- Cradle support pair (lower pivot brackets)
Ball seat (top cylinder mount – welded to tipper body) -- Ball seat (top cylinder mount – welded to tipper body)
Bottom mounting pin (cylinder lower pivot) - Hardened steel | Ø 40 or 45 mm (specify) | Zinc plated | Include cotter pin + flat washer locking set
3. Hydraulic Connections & Plumbing
Main high-pressure hydraulic hose – pre-crimped assembly - Length: 3,000 mm (fixed ± 50 mm) | Min working pressure: 250 bar | Burst pressure: = 1,000 bar | Construction: 2-braid SAE 100R2 / EN 853 2SN | End fittings: G 1/2" BSP female swivel both ends | PRE-CRIMPED – not loose hose | NOTE: current EU system makes hoses on site – this kit must include pre-made fixed length
90° elbow BSP fitting – cylinder connection -- G 1/2" BSP male × G 1/2" BSP female swivel | 90° | Min 200 bar
Straight BSP fitting – tank/valve connection -- G 1/2" BSP male × G 1/2" BSP female swivel | Straight | Min 200 bar
Suction hose – tank to pump (large bore) -- Inner Ø: 38–40 mm | Length: 400–600 mm (specify) | Oil-resistant rubber | Pre-cut to length | Ref: current EU: 18 €/m, Ø 40 mm inside diameter
Suction hose clamps × 2 -- Heavy-duty worm drive | Size: match Ø40 mm suction hose
Hydraulic port protection caps (transport) -- Plastic plugs for all open ports during transport/storage | BSP 1/2" and other sizes
Please quote for the following wholesale product requirement -
Product Name: Weaving Machines
Specifications:
Please be informed that we are currently looking for a new Rapier weaving machine with multifunction to get maximum benefits for our end products.
Weaving Machines Description Need ( Dornier Rapier Machine ) are as follows;
Nominal Width = 544 cm
Maximum Usable Reed = 540 cm.
Minimum Usable Reed = 330 cm
Twin Warp Beam with 1000 mm. flange diameter
Beam Barrel diameter = 216 mm.
Machine Speed = 300 - 400 rpm
Dobby Motion, weave design should be programable in dialog panel
Harness Control = 10 - 16 Harness levers
4 Color Control / Pre winder suitable for a double weft insertion system
Machines suitable to run with Polyester yarn from 280 DTex to 3300 DTex
Mechanical and Melting cutting unit for catch Selvedge
Specifications :
1. Can It Clean Oil Dirt: Mechanical Gearbox Oil, Cars Oil, Grease
2. Can It Clean: Crude-oil Waste
3. Can It Clean: Food Oil, Vegetable Oil, Palm Oil, Silicon Oil
4. Can You Clean Dirt Of Chocolate (on The Floor)
5. Can It Clean Dirt Of: Sugar, Caramel, Jam
Can You Send More Data, Movies, Full Catalogue For Your 1,000w Unit
Material: Metal
Colour: Red And White
Characteristic: Convenient And Safe
Condition: New
Warranty: 1 Year
After Sales Service Provided: Online Support
After Sales Service Provided: Video Technical Support
Laser Source Brand: Kaihuan
Key Selling Points: High Productivity
Applicable Industries: Building Material Shops
Applicable Industries: Manufacturing Plant
Applicable Industries: Machinery Repair Shops
Applicable Industries: Home Use
Applicable Industries: Construction Works
Applicable Industries: Energy & Mining
Applicable Industries: Other
After Warranty Service: Video Technical Support
After Warranty Service: Online Support
Local Service Location: None
Showroom Location: None
Machinery Test Report: Not Available
Video outgoing-inspection: Not Available
Marketing Type: New Product 2019
Warranty Of Core Components: 1 Year
Core Components: Pump
Place of Origin: CN
Max. Output Power:1500W
Usage: Welding
Brand Name: XJL
