This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Specifications:
Universal Model (all body lengths 2,800–4,000 mm)
Telescopic hydraulic cylinder – single universal model -- Telescopic hydraulic cylinder – single universal model
End-of-stroke limiter / limit switch device (electric switch) - MANDATORY – stops tipping at set angle regardless of body length | Must be adjustable to set correct tipping angle for bodies 2,800–4,000 mm | Integrated into cylinder or external mechanical/electrical limit device | When activated: cuts hydraulic pressure / closes solenoid to stop extension | Ref: current EU supplier = 18 € | Include: 2D drawing, adjustment procedure, electrical connection diagram
Hose burst valve (explosion-proof / anti-drop safety valve) -- Prevents uncontrolled lowering if hose fails | Inline or integrated in cylinder sleeve | Rated 200 bar | Thread: G 1/2" BSP | Ref: Penta option sleeve B6G012043 | Include if not already in item 1.1
Cylinder Mounting System
Cradle / balancing bracket – 3-way tipping -- For 3-way tipping: rear / left side / right side | Heavy-duty welded steel | Max load capacity: = 11 tonnes | Allows body rotation left–right and front–rear at ±30° | SINGLE model compatible with item 1.1 cylinder base | Ref: Penta cradle A5L080001 (L120 series): 11.5 kg, max 11 ton, footprint ~360×280 mm | Include 2D drawing with bolt pattern, pin dimensions
Cylinder support pair (upper clamp brackets) - integrated in the cradle - Pair of clamps to support cylinder body on sub-frame | Fit cylinder outer Ø (match item 1.1) | Bolt-on, no welding | Ref: Penta A70045001 (L120 series) | Include 2D drawing
Cradle support pair (lower pivot brackets) -- Cradle support pair (lower pivot brackets)
Ball seat (top cylinder mount – welded to tipper body) -- Ball seat (top cylinder mount – welded to tipper body)
Bottom mounting pin (cylinder lower pivot) - Hardened steel | Ø 40 or 45 mm (specify) | Zinc plated | Include cotter pin + flat washer locking set
3. Hydraulic Connections & Plumbing
Main high-pressure hydraulic hose – pre-crimped assembly - Length: 3,000 mm (fixed ± 50 mm) | Min working pressure: 250 bar | Burst pressure: = 1,000 bar | Construction: 2-braid SAE 100R2 / EN 853 2SN | End fittings: G 1/2" BSP female swivel both ends | PRE-CRIMPED – not loose hose | NOTE: current EU system makes hoses on site – this kit must include pre-made fixed length
90° elbow BSP fitting – cylinder connection -- G 1/2" BSP male × G 1/2" BSP female swivel | 90° | Min 200 bar
Straight BSP fitting – tank/valve connection -- G 1/2" BSP male × G 1/2" BSP female swivel | Straight | Min 200 bar
Suction hose – tank to pump (large bore) -- Inner Ø: 38–40 mm | Length: 400–600 mm (specify) | Oil-resistant rubber | Pre-cut to length | Ref: current EU: 18 €/m, Ø 40 mm inside diameter
Suction hose clamps × 2 -- Heavy-duty worm drive | Size: match Ø40 mm suction hose
Hydraulic port protection caps (transport) -- Plastic plugs for all open ports during transport/storage | BSP 1/2" and other sizes
