This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
More Items Similiar to: Wanted : Clevis Hanger 2 Dimensions
Please quote for the following wholesale product requirement -
Product Name: Prefabricated Building Shelter
Specifications:
dimensions 15 lx 8 m width and 4.5 m height on top. It should have UV protection. we need on side of 15 m 2 double sliding doors of 3 m height
Specifications:
Hot DIY play house series mini simulation house series
Dimensions: 38*40*28.5cm ( 2 models with different color)and 14*18*28*26.5cm
Total 3 models
Quantity: MOQ For each
Material: wooden
Buyer is interested to receive quotations for the following RFQ -
Product Name: Honeycomb And Marble Laminated Product
Specifications :
1. According to the usage with different thickness honeycomb 3- 5mm. It is the product formed by laminating natural stone in thickness.
2. Commonly used dimensions; 15 mm. Honeycomb + 5 mm. Natural stone, 20 mm. Honeycomb + 5 mm. Stones are.
3. Weight of the product decreases up to 17 kg./m2.
4. This product has high impact resistance.
5. Usage areas : interior / exterior wall coverings, elevator floors, yacht industry, furniture industry is preferred.
Please quote for the following wholesale product requirement -
Product Name: C Z Purlin Roll Forming Machine for Construction Buildings
Specifications:
fully automatic / manual change from c to z and vice versa, c and z purlin machine with sizes 80 mm to 300 mm, thickness 1.5 mm to 3.00 mm, Please give us 2 option Option 1 - AS per your standard Machine And option 2 will be with 3 round and 3 slot holes with dimensions 14,18,22 mm dia for round hole and 14 x 22, 18 x 26 and 22 x 32 mm for slot hole, The shaft dia of the rollers must be 100 mm and above, the transmission chain should be minimum 1.5 inch and the motor should be 28kw servo motor. and the stand thickness shoul be minimum 40 mm and above. The cutting blade and slot die material shuld be SK-II.
Specifications :
Send Also Photos
Rollaway Beds
Dimensions In Unfolded
Position
Length Not Less Than 190cm
Width Not Less Than 65cm
Height From The Ground Not Less Than 40cm
Dimensions In Folded
Position
Length Not More Than 110cm.
Width Not More Than 25cm.
Thickness No More Than 20cm
Construction Lightweight Metal Construction With Bed Legs Stoppers
Textile Part Made Of Reinforced Polyester. smooth Surface Resistant To
Water And Dirt.
Load Capacity Minimum 120 Kg.
Weight Weight – Not More Than 10 Kg.
Storage And Transportation
Bag
Bag For Storing And Transporting The Rollaway Bed With
Handle(s) With The Possibility Of Carrying Over A Shoulder
Specifications Required
Tents - 500 Pieces Manufacturer
model
1. Sizes
Length At The Base (external Size) – Not Less Than 4,90 M
Width At The Base (outer Size) – Not Less Than 4,70 M
Height From The Ground To The Top (highest Point) – Not Less Than 2,5
M
Side Wall Height(s) – Not Less Than 1,7 M
Capacity Of The Tent - For A Minimum Of 8 Persons, single Rollaway
Beds For 8 People
2. Construction
Lightweight Prefabricated construction With High Durability And
Resistance To Twisting;
Main Material Of The Construction – Aluminum Alloy
Accessories For Assembly And Fastening: Scaffolding Fittings,
Coupling Elements, strengthening Elements, Ground Anchorage Pegs,
Ropes, Etc. according To The Manufacturer's Decision
3. Material
Material – Textiles Made Of Cotton/polyester (minimum 50 %
Cotton)
Specific Mass Of The Material (mass Per Unit Area) – Not Less Than 420
G/m 2
Hard-to-burn material Fire Resisting Class Not Lower Than "b"
According To En 13501-1 Or Equivalent;
Breathable, Waterproof, impregnated;
Resistant To Rupture;
Provide Protection Against water Ingress With Water Resistance Of
Textiles Of At Least 420 Mm Water Column
4. 2 Opposite Entrances With Minimum Size: Width - 1m And Height - 2
Entrance M With Zip To Close with Opening/closing On Both Sides;
One Of The Two Entrances Shall Be Fitted With The Relevant Elements
Enabling The Tents To Be Directly Connected To Each Other;
5. Windows
2 Windows With Sizes At Least 40 X 60 Cm, Located One On Two
Opposite Sides Other Than The Entrances Fitted With An Insect Net And
An Outer Lid Winding Into A Roll With Fixing Elements
6. Weight Weight Of Tent With Structural Elements And Accessories – Not More
Than 85 Kg
7.
Water
Repellent safety
Tape
At The Bottom Along The Entire Circumference, The Tent Is Equipped
With An Additional Pvc Water Repellent Tape, Preventing Water From
Entering The Interior
8. Storage Bags Bag(s) For Storing The Tent And Tent Accessories.
9. Sustainability
Requirements
The Tent Shall Be Resistant To Load On The Roof With A Minimum Of
0,105 Kn/m 2 (10,5 Kg/m 2 ) Of Snow And Shall Be Wind Resistant At A
Speed Of At Least 0,14 Kn/m 2 (15 M/s) According To En 13782 Or
Equivalent
Please quote for the following wholesale product requirement -
Product Name: Aluminum Flooring Profiles
Specifications :
For Floors , Laminates And Ceramics.
USD/kg price in excel file for articles from attachment , in 2 length ( 0,9m i 2,7m ) and 3 colors ( gold , silver and oak ) with :
pictures ,
dimensions ,
weight kg/m ,
material ,
Alloy code ,
Temper ,
Selfadhesive or not
Surface treatment : Anodizing , Electrophoresis , Powder coating with coating tickness , PVDF coating with coating tickness
and other technic details
So, fill all these data in my excel attachment in the red color letters colunms D , E , F , G , H , I and J
Profiles in column A witch are in red color are MOST frecvent models so offer prices for them obligatory and for others if have time
Qty: MOQ
Quantity Required : MOQ
Shipping Terms : EXW/FOB/CIF
Destination Port : China, Europe, Serbia, Other-Not Shown
