This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Please provide a quotation to the following requirement from importer -
Product Name: Outdoor P2.5 LED Modules
Specifications:
with the following specifications:
Size: 320 mm × 160 mm
Pixel pitch: P2.5
Brightness: minimum 8000 nits
Interface: HUB75 compatible
Please also include the product datasheet for the panel you are quoting so that I can verify the technical specifications.
In addition, I would appreciate if you could confirm the following technical details:
LED brand used (for example Nationstar, Kinglight or similar)
Scan rate (for example 1/16, 1/32 etc.)
Driver IC type (for example ICN2038, FM6126A or equivalent)
Input voltage and maximum power consumption per module
Recommended power supply specifications
Operating temperature range
Lifetime rating (hours)
Whether the panel is intended for indoor or outdoor use and the IP rating if applicable
Warranty period for the modules
Quantity: 25 units initially , LCL
Quantity Required : 1 Less than Container Load/LCL
Buyer is interested to receive quotations for the following RFQ -
Product Name: Outdoor P2.5 LED Modules
Specifications:
with the following specifications:
Size: 320 mm × 160 mm
Pixel pitch: P2.5
Brightness: minimum 8000 nits
Interface: HUB75 compatible
Please also include the product datasheet for the panel you are quoting so that I can verify the technical specifications.
In addition, I would appreciate if you could confirm the following technical details:
LED brand used (for example Nationstar, Kinglight or similar)
Scan rate (for example 1/16, 1/32 etc.)
Driver IC type (for example ICN2038, FM6126A or equivalent)
Input voltage and maximum power consumption per module
Recommended power supply specifications
Operating temperature range
Lifetime rating (hours)
Whether the panel is intended for indoor or outdoor use and the IP rating if applicable
Warranty period for the modules
Specifications:
Modular Solar LED Garden Edging System
Category:
Garden Ornaments
Quantity:
3000 Piece/Pieces
Details:
We are seeking a qualified manufacturing partner in China for a premium Modular Solar LED Garden Edging System.
Please review the attached Product Development & Sourcing Brief and provide your initial feedback and quotation.
Below is a summary of the key requirements:
Product Summary
A 1-metre aluminium garden-edging module with integrated solar charging, battery storage, warm-white LED lighting, and modular joining.
The product must be suitable for Australian outdoor conditions (UV, heat, rain, irrigation, soil contact).
Key Engineering Requirements
Material: 6063-T5/T6 aluminium extrusion, matte charcoal powder-coat
Solar: Narrow 18–30 mm ETFE-laminated solar strip
Battery: LiFePO4 3.2 V, 2–4 Ah (replaceable cartridge)
Lighting: Warm white 2700–3000 K, CRI =80, 20–50 lm/m
Runtime: =8 hours after a sunny-day charge
Electronics: Dusk sensor, dimming logic, full protection circuits
Ingress protection: Target IP67 for electronics cartridge and LED cavity
Modularity: ±7° hidden joiner for curves; no electrical connection between modules
Installation: Rear stakes (GF nylon or coated steel), 2–3 per metre
Prototype Objectives
Validate solar energy balance
Confirm uniform warm-white lighting
Test water sealing
Test mechanical strength and joining system
Provide functional integrated sample before tooling
What we need from your factory
Please provide:
Proposed architecture
Cross-section concept
Material list
Wall thickness
Solar + LED + battery configuration
Energy calculation
Solar harvest (summer/winter)
**ONLY MANUFACTURER CAN CONTACT**
