Please provide a quotation to the following requirement from importer -
Product Name : FC Steel Wire Rope
Specifications:
Right hand medium-coarse steel rope size (10 mm) with fiber core rope qty 2000 meter
Left hand coarse steel rope size (20 mm) with fiber core rope qty 240 meters
Left hand coarse steel rope size (24 mm(1”) 9 outer strands have 16 wire each )with fiber core rope qty 300 meters
Specifications:
High Tensile Steel Wire As Per the following specs
Bright Plain High Tensile Steel Wire of 7mm Diameter QTY 250 Metric Tons
1) Steel required must be bright plain - high tensile steel wire 7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.
2) The steel should conform in all respects with the requirements of the latest edition of BS. 5896 or Chinese specifications [prestressed wire 7.00-1570-WLR-P-GB/T 5223/2002] or equivalent.
3) The nominal tensile strength of the steel should be (1570 N/mm2).
4) The steel should be of “Low relaxation “quality, and the wire is pre-straightened and will run out straight form the coil when used at site.
5) No joint is allowed in the wire which should be one piece in the coil.
6) Steel should be supplied in large diameter coils of (1.8 -2.4) m.
7) The weight of Each coil should be approximately 1000 kgs.
8) Good attention should be paid to the packing of each coil to ensure good protection to the steel during loading, shipping, unloading, transportation, and storing at the site of the purchaser. For that, every coil should be tightly wrapped by proper and secure seaworthy packing.
9) Each coil should have a separate label made of steel sheet with a reasonable size. This label should contain the following information: will be given upon production
10) The price should be valid for at least Two Month and must be based on steel NET weight.
Product : Kanthal A-1 or FeCrAl Alloy Grade A Wire
Specifications:
Shipping Time : 7 Days
- The specifications are detailed below.
Address:
Building 413, Street 19, New Industrial Area (Zone 81), Qatar
Product specifications:
• Material: Kanthal A-1 or FeCrAl Alloy Grade A
• Wire diameter: 5 mm
• Max working temperature: 1350-1400 °C
• Rated Power: 20 kW
• Voltage: 220V
• Wire Shape: U Pattern with dimensions a = 3 cm, b = 15 cm, r = 1.5 cm
• For bell-type annealing furnace
• Length of each wire piece: 8 meters including the U pattern, with no cuts
• Quantity: 3 wire pieces (8 meters each including the U shape) required
Service Requirements:
• Express Shipping (3-7 Days)
• Quality Guarantee: All materials and workmanship shall meet the outlined specifications and conform to the highest standards of quality and performance suitable for industrial furnace operation.
• Failure Clause: Full refund including shipping cost in case of non-compliance or failure to meet specifications.
as per MOQ
Specifications :-
Type - Komatsu harness 6261816130
HARNESS;WIRING,62618 16130KOMATSU HARNESS: TYPE: WIRING; PART NO: 6261816130,KOMATSU,; EQUIP/TAG MODEL NO: HM400,
Not original
Quantity - 1 for trial later on MOQ basis
