Specifications:
Coconut (Outer Shell + Husk and Coconut (Inner Shell)
Coconut (Outer Shell + Husk) : 50 kg
Crushing Specification : Approximately quartered to eighths (4 to 8 pieces per coconut)
2. Coconut (Inner Shell) : 100 kg
Crushing Specification : Approximately quartered to eighths (4 to 8 pieces per coconut)
Qty: 250 kg
Quantity Required : 250 Kilogram/Kilograms
Shipping Terms : CIF
Destination Port : South Korea (Republic Of Korea)
Product : Kanthal A-1 or FeCrAl Alloy Grade A Wire
Specifications:
Shipping Time : 7 Days
- The specifications are detailed below.
Address:
Building 413, Street 19, New Industrial Area (Zone 81), Qatar
Product specifications:
• Material: Kanthal A-1 or FeCrAl Alloy Grade A
• Wire diameter: 5 mm
• Max working temperature: 1350-1400 °C
• Rated Power: 20 kW
• Voltage: 220V
• Wire Shape: U Pattern with dimensions a = 3 cm, b = 15 cm, r = 1.5 cm
• For bell-type annealing furnace
• Length of each wire piece: 8 meters including the U pattern, with no cuts
• Quantity: 3 wire pieces (8 meters each including the U shape) required
Service Requirements:
• Express Shipping (3-7 Days)
• Quality Guarantee: All materials and workmanship shall meet the outlined specifications and conform to the highest standards of quality and performance suitable for industrial furnace operation.
• Failure Clause: Full refund including shipping cost in case of non-compliance or failure to meet specifications.
as per MOQ
Please quote for the following wholesale product requirement -
Product: Iron Ore
Specifications:
Fe More Than 62%+
Fe More Than 62% minimum
Sizes: 0-10 mm Yandi fines
SiO2:(Silica) 6% Max
AIo3(Alumina); 2.50% Max
P (Phosphorus) : 0.08% Max
S (Sulfur): 0.01% Max
Moisture: 8% Max
Qty: 100,000 MT x 12 months
Quantity Required : 100000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Qingdao, Caofeidian Port,, China
Buyer From
Tirunelveli,
Tamil Nadu,
United Arab Emirates
Quantity Required:
100,000
Metric Tons
Payment Terms:
MT/700, 100% Irrevocable Letter Of Credit Payable at discharge port, divisible 90-day validity payable against presentation of shipping & inspection documents(SGS and CIQ
Destination:
China
Looking for suppliers from:
Worldwide
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product : Iron Ore
Specifications:
Iron Ore Fe More Than 62% and up guaranteed.
SPECIFICATIONS(Typical Australian Iron Ore)
SPECIFICATIONS:
Fe >62% minimum
Sizes: 0-10 mm Yandi fines
SiO2:(Silica) 6% Max
AIo3(Alumina); 2.50% Max
P (Phosphorus) : 0.08% Max
S (Sulfur): 0.01% Max
Moisture: 8% Max
QUANTITY: : 100,000 MT Minimum per shipment with extension up to 500,000 MT.
DELIVERY: 100,000MT/month Minimum of 12 Calendar Months contract.
NOTE: NEED QUOTES ON WHATS APP
Packaging Terms : Mother Vessel Capacity (100,000 WMT up to 180.000 WMT(+/-10%)
Quantity Required : 100000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : MT/700, 100% Irrevocable Letter Of Credit Payable at discharge port, divisible 90-day validity payable against presentation of shipping & inspection documents(SGS and CIQ
Specifications:
High Tensile Steel Wire As Per the following specs
Bright Plain High Tensile Steel Wire of 7mm Diameter QTY 250 Metric Tons
1) Steel required must be bright plain - high tensile steel wire 7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.
2) The steel should conform in all respects with the requirements of the latest edition of BS. 5896 or Chinese specifications [prestressed wire 7.00-1570-WLR-P-GB/T 5223/2002] or equivalent.
3) The nominal tensile strength of the steel should be (1570 N/mm2).
4) The steel should be of “Low relaxation “quality, and the wire is pre-straightened and will run out straight form the coil when used at site.
5) No joint is allowed in the wire which should be one piece in the coil.
6) Steel should be supplied in large diameter coils of (1.8 -2.4) m.
7) The weight of Each coil should be approximately 1000 kgs.
8) Good attention should be paid to the packing of each coil to ensure good protection to the steel during loading, shipping, unloading, transportation, and storing at the site of the purchaser. For that, every coil should be tightly wrapped by proper and secure seaworthy packing.
9) Each coil should have a separate label made of steel sheet with a reasonable size. This label should contain the following information: will be given upon production
10) The price should be valid for at least Two Month and must be based on steel NET weight.
Specifications:
Indicators Units of measurement Test results Reference values Test methods
1. Density at 20 °C kg/m3 1024 max. 1050 BDS EN ISO 3675
2. Kinematic viscosity at 100 °C mm2/s 538.2 max. 1500 BDS EN ISO 3104
3. Kinematic viscosity at 135°C mm2/s 159.6 max. 250 BDS EN ISO 3104
4. Flame temperature in an open crucible 331 Min 110 BDS EN ISO 2592
5. Sulfur %(m/m) 1.35 max. 3.5 BDS EN ISO 8754
6. Water %(m/m) 0.049 max. 1 BDS 15862
7. Pour point 38,1 max. 65 ISO 3016
8. Mechanical impurities %(m/m) 0.26 max. 0.5 BDS 65 6080
9. Ash %(m/m) 0.001 max. 0.5 BDS EN ISO 6245
10. Specific heat of combustion (lower) MJ/kg 40.001 min. 39 3965
11. Coke residue (MCRT) %(m/m) 21.43 max. 24 ISO 10370
I REQUEST PRICE AND CERTIFICATE FOR THE PRODUCT
Quantity: ship's party 5000 MT per Month;
