Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Looking for suppliers from:
South Africa, South America
Product Description
Please provide a quotation to the following requirement from importer -
Product Name: Ore
Specifications :
Type: Iron Ore
Need Fe 62% From South Africa, Trial 50k MT CIF China by DLC.
Supplier Has To Offer Recent Sgs,b/l, Please Quote Best Platt Discount Cif Price
Quantity Required : 50000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : DLC
Looking for suppliers from : South Africa, South America
Buyer is interested to receive quotations for the following RFQ -
Product Name: Pipes
Specifications:
Type - Galvanized Iron Pipe (G.I), Wrought Iron Pipe, Steel Pipe, Copper Pipe, Etc.
Material - Steel, pvc
use - in constructions
only manufacturers can connect
Buyer From
Tirunelveli,
Tamil Nadu,
United Arab Emirates
Quantity Required:
100,000
Metric Tons
Payment Terms:
MT/700, 100% Irrevocable Letter Of Credit Payable at discharge port, divisible 90-day validity payable against presentation of shipping & inspection documents(SGS and CIQ
Destination:
China
Looking for suppliers from:
Worldwide
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product : Iron Ore
Specifications:
Iron Ore Fe More Than 62% and up guaranteed.
SPECIFICATIONS(Typical Australian Iron Ore)
SPECIFICATIONS:
Fe >62% minimum
Sizes: 0-10 mm Yandi fines
SiO2:(Silica) 6% Max
AIo3(Alumina); 2.50% Max
P (Phosphorus) : 0.08% Max
S (Sulfur): 0.01% Max
Moisture: 8% Max
QUANTITY: : 100,000 MT Minimum per shipment with extension up to 500,000 MT.
DELIVERY: 100,000MT/month Minimum of 12 Calendar Months contract.
NOTE: NEED QUOTES ON WHATS APP
Packaging Terms : Mother Vessel Capacity (100,000 WMT up to 180.000 WMT(+/-10%)
Quantity Required : 100000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : MT/700, 100% Irrevocable Letter Of Credit Payable at discharge port, divisible 90-day validity payable against presentation of shipping & inspection documents(SGS and CIQ
Please quote for the following wholesale product requirement -
Product: Black Iron Ore Fines (Magnetite)
Specifications:
54-55%
with moisture content - 5% max , Alumina - 5% max ,Silca - 6% max
Size - 0 to 6mm
Density - 4.3 to 4.4 g/cm3
Specific gravity - 4.27 minimum
Buyer is interested to receive quotations for the following RFQ -
Product Name: Pipes
Specifications :
Material: Stainless Steel, Flexible Type
Type: Pipes And Tubes
Dimension: Customized
Suppliers Should Contact By Email By Initially Sharing Their Company Brochure
Please quote for the following wholesale product requirement -
Product: Iron Ore
Specifications:
Fe More Than 62%+
Fe More Than 62% minimum
Sizes: 0-10 mm Yandi fines
SiO2:(Silica) 6% Max
AIo3(Alumina); 2.50% Max
P (Phosphorus) : 0.08% Max
S (Sulfur): 0.01% Max
Moisture: 8% Max
Qty: 100,000 MT x 12 months
Quantity Required : 100000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Qingdao, Caofeidian Port,, China
