Roto Polymers is offering the best quality LLDPE Virgin and Reprocessed Plastic Granules and Pulverised Powder for Rotomoulding. The product is manufactured by using the best quality high-grade basic material procured from standard vendors in the industry, these products conform to the defined parameters of the industry requirements and prevailing market demands in the domestic as well as international markets.
Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade
Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
HDPE Feature Polymer; Thermoplastic; Polyethylene (PE); High Density (HDPE) The crystallinity is 80% to 90%, the softening point is 125 to 135'C, and the service temperature can reach 100'C; the hardness, tensile strength and creep are better than those of low-density polyethylene; abrasion resistance, electrical insulation, toughness and Good cold resistance; good chemical stability
High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.
Properties 1. Excellent transparency, outstanding resistance to aging. 2. It has good insulating properties and mechanical strength; to acid, alkali, salt has a strong resistance to corrosion; and because easy processing. Applications 1.Extruded sheets for signage, displays and building material 2.Motive parts such as tail lamps, meter covers and sun visors 3.General sundries such as tableware, kitchenware, giftware and bathroom accessories 4.Optical lenses such as sunglasses, reading glasses and camera lenses 5.Light guide panels for LCD displays 6.Other applications such as mobile phone display panels, clock covers, lighting covers/accessories, optical fibres, toys, etc.
High Density Polyethylene (HDPE): HDPE is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of �±-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density.It has high temperatures, good rigidity,mechanical strength and anti-chemical corrosion. HDPE applications are including film, blow-molding, extrusion molding, injection molding, pipes, wire & cable and base material for producing chlorinated polyethylene.
Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on. Item Value Product Name LDPE Granules Other Names Low Density Polyethylene Place of Origin China Grade Standard Industrial Grade,Injection molding grade Density 0.91-0.93 g/cm³ Appearance White Granules,customized color Application Plastic,film , bag Sample provide Package 25 kg/bag,1000 kg/bag,customized packag
LDPE Granules Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.
Wholesale Clear LDPE Film Scrap Specification: These are ldpe films in bale. The ldpe comes from many sources like super market, some industrial waste, and some from consumers. This scrap may have max 5% moisture depending upon availability in material. LDPE film, supper market qualities with/without stickers (post used) From: 100% clear to 50% clear Brand Name LDPE Plastic Scrap Model Number ISO 9001 Product Name LDPE Plastic Roll Scrap Type Plastic Paper/ Virgin Film Roll Material Polyurethane Grade 100% Clean, 100% Clear Plastic Transparency 90% Color ratio Clear 100% Moisture < 0.01% Impurities < 0.01% PVC content < 2ppm Density(g/cm 3 ) 0.95 For more products, quotations and accurate shipping details kindly provide us with your valid email address and whatsapp number if you are interested in trading with us.
Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %