The MS20 is a high precision and high sensitivity of soil moisture & temperature sensors. By measuring the dielectric constant of the soil, it shows stable real moisture content directly. The MS20 can measure the volume of soil moisture. The FDR soil moisture measurement method is in line with present international standards. Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, fast measure, plant cultivation, greenhouse control, precision agriculture and the other measurement of water, weather or particulate matter content.
Support customer soil type, the user can calibration
Contain moisture & temperature measure. High precision, quick response and good compatibility.
Seal with Fire-retardant Epoxy Resin, IP68 water proofing. Long term usage.
Special treatment of probe material can be against acid and alkali corrosion.
Widely used in many kinds of soil because of the imported advance tech which correct the effect of different salt content.
Multiple protection functions including Power supply, communication, analog output. High reliability.
2 Technical parameter
Technical parameter
Signal output typeRS485 interfaceVoltage outputVoltage output
(Low-voltage)Current output
Output rangeModbus Protocol0-2V
0-5V
0-10V
Customize0-1V
0-2V4-20mA
Customize
Input voltage4.2-30V/DC4.2-30V/DC2.7-16V12-30V/DC
Average working current
About MT-10
We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
2.1 Specifications
Volumetric Water Content
Range: 0 (air) to 100 (water)
Temperature
Range: -40 to 80
Resolution: 0.01
Accuracy:±0.5
General
Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)
Prong Length: 5.2 cm
Dielectric Measurement Frequency: 70 MHz
Measurement Time: 150 ms (milliseconds)
Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement
Output: SDI-12 / RS485 MODBUS RTU
Operating Temperature: -40 to 80
Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)
Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.
PHYSICAL CHARACTERISTICS
SENSOR IMAGE
SENSOR NAMEMT10
DIMENSIONS10 cm X 3.2 cm
CABLE LENGTH5 meters
This ms10 soil moisture & temperature sensor is provided with high accurate and high sensitive. By measuring the dielectric constant of the reaction of soil, soil direct stable real moisture content.This ms10 soil moisture & temperature sensor can measure the volume of soil moisture.The soil moisture measurement method is in line with international standards at present.Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, soil, plant cultivation, measured speed of sewage treatment, grain storage, greenhouse control, precision agriculture, at the same time in the measurement of water, weather and particulate matter content.
, high measuring accuracy, fast response, good interchangeability
, good sealing performance, corrosion resistance, long buried in soil using
, the flame retardant epoxy resin curing, completely waterproof, can withstand the strong external shocks
, needle using quality materials, can withstand long-term electrolysis, can withstand the corrosion of acid and alkali in the soil
, high measuring precision, reliable performance, the effects of soil salt content is small, suitable for all kinds of soil
, having power reverse protection
Technical parameter
The signal output typeoutput voltage 0-2v
Output impedance
This MEC10 soil moisture & EC & temperature sensor is provided with high accurate and high sensitive. It is an important tool to observe and study the occurrence, evolution, improvement and the dynamics water of saline soil. By measuring the dielectric constant of the reaction of soil, soil direct stable real moisture content. This MEC10 sensor can measure the volume of soil moisture. The soil moisture measurement method is in line with international standards at present. Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, soil, plant cultivation, measured speed of sewage treatment, grain storage, greenhouse control, precision agriculture. The sensor has the following characteristics:
Soil moisture content, electrical conductivity and temperature three parameters.
One solution can also be used for fertilizer, and other nutrient solution conductivity matrix.
ï3ïElectrode using special treatment of the alloy material, can withstand a strong external impact, not easy to damage.
ï4ïCompletely sealed, acid and alkali corrosion, can be buried in the soil or directly into the water for long-term dynamic testing.
ï5ïHigh precision, fast response, good compatibility, the probe insert design to ensure accurate measurement, reliable performance.
ï6ïPerfect protection circuit and a variety of signal output interface.
Product Description
soil moisture and soil temperature sensor to facilitate soil moisture and soil temperature measurement. The product has high precision, fast response and stable output. It is less affected by soil salinity and is suitable for various soil types. It can be buried in the soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, waterproof and rust proof.
Soil Moisture Sensor Technical Parameters
Technical Parameter
The signal output type
Output voltage 0-2V
output impedance
103701 Soil Moisture Temperature Sensor Suppliers
Short on time? Let Soil Moisture Temperature Sensor sellers contact you.
Virtualâ?? make Soil Moisture Temperature Recorder offers professional Soil monitoring and good value for money. The standard Soil Moisture Temperature Recorder consists of a weatherproof enclosure, which contains the data logger and power supply, and comes complete with a solar panel, tripod stand and Soil Moisture Sensors (Watermark) & Temperature sensor. Measure every major environmental condition with this powerful sensors & Data logger. Measurements can automatically store in systems memory as per user selectable logging period. Comes with integral solar panel, which will easily keep the batteries charged throughout the year. A durable hard enclosure protects the data logger from weathering. User-replaceable SMF batteries. Data file is saved in Microsoft's Excel.
Soil Tension sensor is a solid state electrical resistance sensing device that is used to measure soil water tension. As the tension changes with water content the resistance changes as well. That resistance can be measured using the soil Sensor. The sensor consists of a pair of highly corrosion resistant electrodes that are embedded within a granular matrix. A current is applied to the Sensor to obtain a resistance value. This sensor is designed to be a permanent sensor, placed in the soil to be monitored and â??read as often as necessary with a portable or stationary device. Internally installed gypsum provides some buffering for the effect of salinity levels normally found in irrigated agricultural crops and landscapes.
This Soil Moisture sensor is a FDR (frequency domain reflectometry) based sensor that is used to measure Soil volumetric water content (VWC) and temperature. The sensor consists of highly corrosion resistant electrodes. This sensor is designed to be used for portable as well permanent installations placed in the soil.
Model FZK8810A QY-EWQ-01
Measurement Method Non-contact type
Power Supply Prompt for low battery charge DC 3V(2 AAA batteries)
Measuring Range 32-42.5 33~43.0
Electricity Prompt Prompt for low battery charge
Measure Distance 1cm-15cm 3~5cm
Fever Alarm Abnormal body temperature alarm 5 beeps in case of the
temperature is higher 38
Measuring Time Measurement time:0.6 second
Maximum Error ±0.2 0.2~0.3
Display Unit Centigrade()
Display Resolution 0.1 0.2~0.3
Automatic Shutdown 15 seconds 20 seconds
Operating Environment 10-40, Humidity 85%
Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm
Transportation And Storage Environment -20
-55,Humidity 85%
Description
A succulent mix typically refers to a blend of soil specifically formulated for growing succulent plants. Succulents are known for their ability to store water in their leaves and stems, making them well-suited to arid conditions. A good succulent mix will usually have excellent drainage properties to prevent waterlogging, as succulents are susceptible to root rot if their soil stays too wet for too long..
Packaging Size: As per user requirement
Packaging type: As per user requirement
1> Kanuma has good results whether it uses for professional production, home cultivation or soil improvement. Especially suitable for plants which are sluggish, avoid humidity, and tolerate barrenness such as various bonsai, orchids, and alpine flowers. Kanuma can be used as single media or substrate which mixes in other soil medias such as peat, Akadama.
2> The recommended mixing ratio is 30% for flowers and foliage plants, 50% for bulb flowers, and 60% for orchids.
Product description: QT-ML3 portable soil moisture/temperature meter can be used for the measurement of moisture of various types of soil and media, and it can be used as a basic tool for on-site observation or mobile measurement.
Principle
Using FDR (frequency domain reflectometry) principle, the sensor emits electromagnetic wave with a certain frequency, the waves transmit along the probe till they reach the bottom of the probe and return to the sensor, the output voltage is recorded. Because the dielectric constant of the soil usually depends on the soil moisture, the soil water content can be calculated according to the relationship between the output voltage and soil moisture.
Feature
GPS coordination can be recorded
Record data Automatically or manually
Wireless data transmission via Wi-Fi
Recognize sensors by two-dimensional code
Automatically recognize connected sensors
Terminal memory card is up to 32G
Display real-time data and curve of recorded data
Export data to Excel for analysis
Product description: the qt-aqua soil moisture/temperature meter can be used for the measurement of soil volumetric water content based on the advanced tdr principle. The electrical signal can be directly output, and the soil volumetric water content and soil temperature can be shown directly. The meter can be widely used in agricultural production, scientific research, etc because of its low cost.
Feature
Gps coordination can be recorded
Record data automatically or manually
Wireless data transmission via wi-fi
Recognize sensors by two-dimensional code
Automatically recognize connected sensors
Terminal memory card is up to 32g
Display real-time data and curve of recorded data
Export data to excel for analysis
Product description: QT-PICO can be used to rapidly measure soil moisture in the upper layer, it can also work with extension rod to measure deep soil moisture. After calibration, it can measure soil salinity at the same time.
Principle
QT-PICO soil moisture and temperature meter is based on TDR (Time domain Reflectometry) technology. It can directly measure the dielectric constant of soil or other media. According to the relationship between the dielectric constant and soil moisture, soil water content can be derived from the output voltage.
When the meter is operating, it first produces 1GHz high frequency electromagnetic waves, then the waves transmit along the conductor and generate an electromagnetic field around the probe. When the waves reach the end of the conductor, they return to the source. The duration of transmission is between 10 ps and 2 ns. The meter is very sensitive and it can detect the time signal as short as 3 ps. The time sampling method makes soil moisture measurements become more accurate and convenient.
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.
Features & Benefits:
Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs
103701 Soil Moisture Temperature Sensor Suppliers
Short on time? Let Soil Moisture Temperature Sensor sellers contact you.
