Features:
1) use the copper coil as the heat exchanger, according with international fashion trend, it is simple to install and use.
2) it takes the advantage of the tap water's pressure. More pressure , more comfortable.
3) it can produce hot water with constant temperature, it is safe and comfortable to use.
5) The water can be heated rapidly, so it can produce the high quality hot water.
It can produce more hot water than the general types because it isn't.
Key specification:
1) inner tank: stainless steel--0.50mm.
2) vacuum tube: Ñ)47 x 1, 500mm.
3) outer tank: painted steel-0.4mm; stainless steel sus304-0.4mm.
4) frame: coated galvanized steel-1.5mm; stainless steel sus430-1.5mm.
5) insulation: polyurethane 50mm.
6) copper coil: ¿¬12mm, thickness 0.8mm
The characteristic:
1 it takes the advantage of the tap waterf+s pressure.More pressure, more comfortable.
2 the water can be heated rapidly, so it can produce the high quality hot water.
3 it can produce more hot water than the general types because it is not restricted by the volume of the tank.
The details of material
1 inner tank : stainless steel sus304-0.6mm
2 vacuum tube : qb-al-n/al-58-2000
3 out tank : painted steel-0.4mm, stainless steel sus304-0.4mm
4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm.
5 the material of insulation:polyurethane 50mm
6 the reflector:aluminum component : al 99.85% surface oxidation.
7 copper coil : ft12mm, thickness 0.8mm.
Structure of solar collector:
1. Manifold
2.F58mm heat pipe tube
3.Side track
4.Bottom track
5.Feet holder
Characteristics
1.Water is rapidly heated by the heat pipe.
2.There is no water in the vacuum tube, so the tube will not break in cold climate.
3.The small size of the collector allows for versatile architectonic integration.
4.Collectors can be combined with existing pipeline.
5.The collector can operate even in case of a broken tube. A single tube can, if necessary, be exchanged without interruption of the heating cycle.
Non-pressurized solar water heaters, Pressurized solar water heaters, Pre-heated solar water heaters, Solar Collectors.Transportation, warranty, best after-sales service
Solar water heater, integrative pressurized solar water heater, pre-heating solar water heater, split solar water heaters with heat pipe, split falt solar water heater, solar non-pressuirzed and pressurized tanks.
Agni Solar water heaters are a blessing, because not only do they provide instant hot water on demand, but they also reduce your electricity bills significantly.
Now you can get hot water during non-sunny days too, because the insulated storage tank can be fitted with an optional heating element which will allow the system to function all-year-round. http://agnisolar.com/products/solar-water-heating-system
Model: IRA-HP58/1.8-20
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.5mm thickness of galvanized steel material,45degree.
Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2.249m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 24 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 240L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-12
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Characters:
1) Easy Maintenance
No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system.
2) High Performance
With the cutting-edge vacuum-tube collecting technology, over 92% of sunshine energy is converted to thermal energy for heating and no circulation loss. Thicker insulation layer, functioning well in winter, even in minus-30-degree environment.
3) High Reliability
System is simply working with the city net water, without pumps. Inner tank made by stainless steel SUS316-1.2mm. Working with high pressure, directly connected to running water, automatically functioning. With T/P valve and exhaust valve, it protects the tank from shrinking.
4)Year-round Operation
With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days.
Principle:
When vacuum tube absorb solar energy and heat the heat pipe ,the working fluid vaporizes and rise to the top of the heat pipe condenser, when heat pipe condenser meet cold water and cool down, the
working fluid will fluidity and return to the bottom of the heat pipe, so once and once again to repeat this process.
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l, enamel;thickness, 1.2-2.5mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer: polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes: aln/ain-ss/cu layer; 47-1500 or 58-1800 with heat pipe.
6. Heating element, mg rod, reflector and controller can be provided.
7. Working pressure :0.6mpa , testing pressure :1.0mpa.
Characteristic:
1. Evacuated tube, aluminum fin and heat pipe arc closely integrated, realizing faster heat transfer and lower loss.
2. There is no water in tube, no filthy, anti-freeze, unlimited time of putting water and pressure operation, even there is tube broken, and the whole system still can work.
3. The system is same as tap water which would make the bathing very comfortable.
4. With the t/p valve, air vent valve makes the system work very stable and safety.
5. Can be used all year round in the cold climate
1.Brief Features:
Model:58-470-16
Capacity: 160L
Tank material: stainless steel/Nano plastic
Container loading: 20PG/40HG: 47/105set
Warranty: 5 years from the date of arrival at destination port
Cooperation model: OEM acceptable/CKD parts acceptable
2.Introduction
High Quality Stainless Steel, Non-Pressurized Solar Water Heater
Nowadays, non-pressurized solar water heater is very popular in many countries and area, such as India, Mexico, Vietnam, China, Chile....etc.
Features and advantages:
1. High efficiency and economical system.
2. Suitable for projects and home use.
3. Designed for commercial solar water heating applications.
4. Reliable and efficient with twin-glass solar tubes.
5. Polyurethane insulation ensures a good heating performance and minimal heat loss.
6. Easy plug-in installation.
7. Can be connected in series to increase water heating capacity.
TellS Solar water heaters use the solar energy from the sun to generate heat (not electricity) which can then be used to heat water for showering, space heating, industrial processes or even solar cooling. Solar water heating systems comprise various technologies that are used worldwide increasingly, uses for solar water heater in Domestic: Bungalows and Apartment, Commercial: Hotels, Hospitals, Dairies, and Industrial: Process Industries, Preheating boiler feed water, wherever & whenever you need hot water
1.Stylish slim line design
2. Thermosiphon operation minimises maintenance
3. Electric booster models available
4.Inner tank with vitreous enamel or SUS304
5. Collector absorber with black chrome coating
6. Unpressurized system
7. Reliable, low maintenance operation
8. Flexible option of collector and tank capacity
9. Enhanced protection for maximum life
10. Easy mounting and installation.
1. Ccc, ce, iso certificated 2. Sus 304 food grade tank 3. Get hot water of 95-100 degree 4. Warranty:5years 5. Quick deliver
Characteristics
1. Instant heat exchange to provide plentiful warm water
2. Fresh and high water quality
4. Output water temperature is stable, so it is very comfortable and safe to use
5. Hot&cold water flow is separated
6. Copper coil is tested and does not break
7. Works intelligently and easy and is very reliable
8. Perfect performance
Material
Inner tank: imported stainless steel (sus304/2b), 0.5mm thickness
Outer tank: galvanized steel alloy, 0.4mm thickness
Bracket: galvanized steel alloy, 1.5mm thickness
Heat insulation layer: imported polyurethane (bayer, germany), 50mm thickness
Working temperature: 99 celsius degree
Working pressure: copper coil: above 0.6mpa (6 bars), tank: 0.005mpa (0.05 bars)
Copper coil: 12mm, 0.8mm thickness
Warranty: 1 year for electric parts/5 years for the full system /15 years for the vacuum tube
Remark:
1. Diameter of the tank: 360/460mm
2. Insulation thickness: 50mm
3. Coil connection: 1/2"
4. Electric heater connection: 1"
5.Cold water inlet: 1/2"
6. Installation angel: 45
Packaging details: Manifold in one carton, frame in one carton, vacuum tubes in several cartons
Detailed products description:
1. Certificate: Solar keymark. SRCC. Watermark, Standardmark
2. non-pressure solar water heater
3. 15 years of lifetime
4. high efficiency and good heat conductivity
5. intelligent control ,display the temperature all the time.
Specification:
Storage tank volume
Outer casing: aluminium alloy thickness :0.5mm
Inter tank: SUS304 2b stainless steel
Insulation layer: polyurethane foam /rock wool for optional
Inlet and outlet: SUS304 2b
Heat preservation: 72 hours
Welding: Arg welding
Vacuum tube
Number of tube: 20L ,24L,26L,28L,32L for optional
Tube length: 47*1500/58*1800/47*1800 for optional
Heat absorption rate : 91%
Thermal damage rate: ULT =0.82W/(m2)
Coating of vacuum tube: AL/N/AL
Heat pipe: anti-freeszing>-35
Hail resistance: 25mm
Working pressure: 6bar
Max test pressure:12bar
Max working temperature: 280C
Tube holder: UV stabilized nylon
Support
Aluminum alloy.
Type of collector: ETC
Specification: 47*1800mm
Number of tubes: 12, 15, 18, 24, 28
Frame Angle: 27 degree
Inner tank materials: Food Grade Stainless steel
Tank volume: 100L-250L
Outer tank: Powder coated/Stainless steel
Number of persons to use: 3-8
Benefits of solar water heaters:
1. Better Performance in winter and cloudy days
2. No scale Formation will occur by using salt &hard water
3. Compressed PUF insulated Storage tank to retain the hot water for more than 48 hrs.
4. suitable for bore well and hard water usage
5. All fasteners are made of SUS 304 food grade for rust free
6. ISI marked 1.5kw back-up heater with thermostat (optional)
7. Replacement guaranty for 5 years and free services
8. Minimum product life span of 25-30 years.
9. No electricity needed and very eco-friendly.
Specification: 47*1800mm
Number of tubes: 12, 15, 18, 24, 28
Frame Angle: 27 degree
Inner tank materials: food grade stainless steel.
17437 Pre Heated Solar Water Heater Suppliers
Short on time? Let Pre Heated Solar Water Heater sellers contact you.
