Find Verified Lightning Surge Protector Ly1 C40 Suppliers, Manufacturers and Wholesalers

Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics.
Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union.

We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us.

-

Key Specifications/Special Features
Product Parameters
Model LY1-C40 4P
In 20kA
Imax 40kA
Uc 420V AC
Up

-

Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics.
Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union.

We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us.

-

Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics.
Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union.

We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us.

-

Key Specifications/Special Features
Product Parameters
Model LY1-B60
Uc 420V DC
In 30kA
Imax 60kA
Up â?¤2.4kV
Poles 4P
Installation 35mm Din rail installation
Fuse or switch matched 32A
Response time

Key Specifications/Special Features
Product Parameters
Model LY1-B100
Uc 385V DC
In 60kA
Imax 100kA
Up â?¤2.5kV
Poles 4P
Installation 35mm Din rail installation
Fuse or switch matched 32A
Response time

Surge Protectors

* 1P, 2P, 3P, 4P optional
* Uc: 420V
* In: 10KA
* Imax: 20KA
* Customized available

Function of the surge protector

This product is used for the control center, convenient for 1U standard Rack Mount. It is suitable in matrix and DVRs.


Features
1. With integration and small volume, easy for wiring and installation;
2. Advanced surge protection; short response time, low residual voltage, and long service life.

Technology Parameters

Nominal Voltage
5V
Insertion loss
Less than 0.3dB
Max. Continuous dc Voltage UC
8V
Response time
Less than 1ns
Max. Through Flow Rate
5KA
Impedance
75¦¸
Data Transmission Speed VS
10M
Interface
BNC
Working Temperature Range: -25~+65 Celcius Degree
Humidity Range: 5%~95%

20-5000 0.11kg 13*3*3(cm)

1.Product Type:

Surge arrester can be divided into many types according to its application as below:

Distribution type,power station type,protecting capacitor type,transformer neutral point type ,protecting motor type,electrified railway type,line type.etc.

Line type surge arrester can be divided into series spacing type and without spacing type and in series spacing type can be divided into supporting spacing and sure air spacing type.

2.Main Product Features:

2.1It has a series of outstanding features such as good protection performance,high circulating capacity ,less reaction time,smooth steep-wave characteristic.

2.2 Excellent silicon rubber material is used in composite housing,possessing good anti-tracking and ageing-resistant performance as well as good hydrophobicity ,ion transferring and high pollution proof.

2.3 Special technique and internal structure are used in composite housing surge arrester,possessing higher technical strength and good explosion-proof performance.

3.Service Conditions:

3.1 Ambient Temperature: - 40 + 50

3.2 Altitude: 1000m;

3.3 Frequency : 48 Hz , + 50 Hz;

3.4 Power Frequency Voltage exerted long-time on surge arrester shall not exceeds continuous operation voltage;

3.5 Earthquake intensity is not more than 7 grades;

3.6 Wind speed is not more than 35mm/s;

Usage under exceptional conditions shall be negotiated by both parties.

Specially designed for ac power line protection against damaging high voltage surges from lightning & inductive switching.

Providing protection for equipments or instruments whose power consumption is below 10a

We provide a complete product series to protect different telecommunication or video signal transmission devices. Ars-004-s45 is perfect for internet equipments, ars-004-n11 can be applied to protect telephone, fax machine, xdsl or adsl devices, and ars-001-rxx is designed to protect surveillance camera and cable tv line. For this model, we inlcude several different options of connectors, f female, f male, bnc female or bnc male connector.

Ex-calibur telephone line surge protection unit with LED indication - 1 line. This will protect 1 trunk port of PBX.

4P 60kA AC surge protector

This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system,  it protect to indirect and direct lightning effect or other transient over voltage 


SPD design according with GB18802.1/IEC61643-1 standard.

Specification details:
Model PQ1-60
Poles 4P
Max. continious working voltage(Uc) 420V AC(can customized)
Nominal discharge current(In) 30kA
Max.discharge current(In) 60kA
Voltage protection level(Up) 2.0kV
Matched circuit breaker/Fuse 32A
Response time

2P 80kA AC surge protector

This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system,  it protect to indirect and direct lightning effect or other transient over voltage 


SPD design according with GB18802.1/IEC61643-1 standard.

Specification details:
Model PQ1-80
Poles 2P
Max. continious working voltage(Uc) 420V AC(can customized)
Nominal discharge current(In) 40kA
Max.discharge current(In) 80kA
Voltage protection level(Up) 2.5kV
Matched circuit breaker/Fuse 32A
Response time

250v eu plug power leads with 6 port smart usb surge protector 4 ac outlet 1.8m extension cord
Also known as power strip

Protect computers and other electrical devices against damages from power surges and spikes.
Ce rohs certified. Highest quality product. Hard wired with a grounded eu plug



Name
Eu 4 outlet surge protector power strip with 6 usb fast charger ports
Rated voltage
250v
Rated current
16a
Usb
6 usb ports ( max 6a)
2.4a*2 for tablet or cell phone
1a*4 for cellphone
Switch
Silver contacts
Shell material
Fire resistance pc
Contacts material
Phosphor copper conductor
Wire material
100% copper
Wire length
1.8 m ( 6ft )
Diameter
3*0.75mm² or 3*1.5mm² for your option

Features
A: over-current protection
B: surge protector
C: lightning protection
D: usb auto current recognition

SP-005BNC is suitable to protect video signal of CCTV surveillance, and it also applies to cable television, public television, and security monitoring systems as well as video-on-demand systems and coaxial communication apparatus.

Function Video signal surge protection
Rated Load Voltage (DC):5V
Limited Voltage DC:20V
Insertion Loss(dB) :< 0.2dB
Max Transmission Rate (Mbps):10
Connector :BNC
Dimensions: 43mm(W)í-25mm(H)í-25mm(D)
Weight: 60g.

Ac power arrester surge protector

Applications:
C/d class surge protective device for ac power system.
Sensitive electronic equipment
Telecom centers
Automatic control centers
Intelligent mansions
Industrial enterprises
Medical institutes

Features:
Din rail mounting for easy installation
Plug connectors for quick and easy connection or rewiring
40ka maximum surge current
Thermal disconnect device
Status indicators visually verify protection level
Surge protection device with n-pe residual current spark gap as 3+1 circuit

Specifications about m40b3+n
Parameterm40dnpe50
Iec /vde level ii/c ii/c
Nominal operating voltage 110/220v ac 500v(n-pe)
Max. Continuous operating voltage 275v 61630;/250v
Leakage current at 1ma <15ua -
Nominal discharge current at 8/20+s 20ka 20ka
Max discharge current at 8/20+s 40ka 50ka
Protection mode <1100v <1100v
Response time <25ns <100ns
Short current 61630; 200arms
Installing forward insurance device 32a gl 32a gl
Long-distance alarm
Max. Continuous operating voltage250vac/125vdc
Max. Continuous operating current imax ac (61527;/ind.)1a /1a
Max. Continuous operating current imax dc (61527;/ind.)0.2a/30ma
Mechanical specification
Dimension (mm)90 * 72 * 66
Dos shell material:pc
Obstructing burn level+according with ul94:v0
Adopting iec529/en60529ip20
Dos shell colorwhite
Test standardiec61 643-1: 1982-02, pren61 634-1 ul1449ed.2
E din vde0675part6: 1989-11/a1: 1996-03/a2: 1996-10
Environment
Operating temperature-40 ~ +85
Relative humidity_95%

3P+N 40kA lightning surge protection device

This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system,  it protect to indirect and direct lightning effect or other transient over voltage 


SPD design according with GB18802.1/IEC61643-1 standard.

Specification details:
Model PQ2-40
Poles 4P
Max. continious working voltage(Uc) 420V AC(can customized)
Nominal discharge current(In) 20kA
Max.discharge current(In) 40kA
Voltage protection level(Up) 1.8kV
Matched circuit breaker/Fuse 32A
Response time

Ex-calibur telephone line surge protection unit with LED indications - 2 line. This will protect 2 trunk ports of PBX.

Ex-calibur telephone line surge protection unit with LED indication - 3 line. This will protect 3 trunk ports of PBX.