In-circuit Test Probe Spring-loaded Pogo Pin PE100(115) for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PE100(115) series here. Its test center is 100 mil. The diameter is 1.36 mm and the total length is 36.5 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly three types of receptacles, namely CR, SC and WW to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 2.54 mm (100 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 30 milliohms
Mounting Hole Size: Diameter 1.75 mm
Full Stroke: 6.5 mm
Rated Stroke: 4.3 mm
Spring Force: 200 gf (7.2 oz)/255 gf (9 oz)/284 gf (10 oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Gold-plated Probe Pogo Pin PE100(90) Series for In-circuit Test
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PE100(90) series here. Its test center is 100 mil. The diameter is 1.36 mm and the total length is 34 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly three types of receptacles, namely CR, SC and WW to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 2.54 mm (100 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 30 milliohms
Mounting Hole Size: Diameter 1.75 mm
Full Stroke: 6.5 mm
Rated Stroke: 4.3 mm
Spring Force: 284 gf (10 oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
In-circuit Test Probe Pogo Pin P156 Series for PCB Assembly Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PQ156 series here. Its test center is 156 mil. The diameter is 2.36 mm and the total length is 33.79 mm. Various tip styles, for example, B, C, G, J, K, L, T, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, WW and WW-L, to fit each test probe
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 3.96 mm (156 mil)
Current Rating: 5 Amps, continuous
Contact Resistance: 50 milliohms
Mounting Hole Size: 2.75 mm
Full Stroke: 6.35 mm
Rated Stroke: 4.32 mm
Spring Force: 113/198/255/285 gf (4/7/9/10 oz)
Company Information
Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
In-circuit Test Probe Pogo Pin P078 Series for Printed Circuit Board Assembly
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe P078-BK-346 series here. The diameter is 0.78 mm and the total length is 34.6 mm. Various tip styles, for example, BK, H, S, T, E, C, U, G, etc., are available for test probes.
For details, please check below parameters.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms
Full Stroke: 6.9 mm
Rated Stroke: 4.6 mm
Spring Force: 200 gf (7 oz) at load 4.6 mm
Materials
Contact Barrel: Phosphor Bronze, Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Plunger: SK4, Au on Ni Plated
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
In-circuit Test Probe Pogo Pin PQ100 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PQ100 series here. Its test center is 100 mil. The diameter is 1.36 mm � and the total length is � 33.25 mm. Various tip styles, for example, H, K, L, BK, etc., are available for test probes. There are four types of receptacles, namely CR, SC, SW and WW, to fit each test probe.
For details � please check below parameters.
Technical Specifications
Recommended
Minimum Center: 2.54 mm (100 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 30 milliohms
Mounting Hole Size: 1.75 mm
Full Stroke: 6.35 mm
Rated Stroke: 4.3 mm
Spring Force: 100/120/156/203/255/284/312 gf (3.5/4/5.5/7.2/9/10/11 oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world
Welcome to browse our website � and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us.
Notice:
Stock: standard product. As usual, they are in stock.
Express: DHL, FedEx, UPS, etc.
Payment: T/T, PayPal
442 In Circuit Test Probe Spring Pogo Pin Pe100(115) Suppliers
Short on time? Let In Circuit Test Probe Spring Pogo Pin Pe100(115) sellers contact you.
In-circuit Test Probe Pogo Pin PICT75 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PICT75Ã? series here. ItsÃ? diameter is 1 mmÃ? and the total length is 21 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, CRWÃ? and SWÃ? to fit each test probe.Ã?Â
For details, please check below parameters.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 150 milliohms
Full Stroke: 4 mm
Rated Stroke: 2.65 mm
Spring Force:� 130 gf (4.5 oz) at load 2.65 mm
Materials
Contact Barrel: Phosphor Bronze, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Plunger: BeCu, Au on Ni Plated
Company Information
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
In-circuit Test Probe Pogo Pin PE50 for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
In-circuit Test Probe Pogo Pin PE75 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PE75 series here. Its test center is 75 mil. The diameter is 1.91 mm and the total length is 33.1 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly three types of receptacles, namely CR, SC and WW to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 1.91 mm (75 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 40 milliohms
Mounting Hole Size: Diameter 1.35 mm
Full Stroke: 6.4 mm
Rated Stroke: 4.3 mm
Spring Force: 150 gf (5.5 oz)/200 gf (7.2 oz)/227 gf (8 oz)
semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
In-circuit Test Probe Pogo Pin P085 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe P085 series here. Its diameter is 0.82 mm and the total length is 37 mm. Various tip styles, for example, H, S, T, E, C, U, G, etc., are available for test probes.
For details, please check below parameters.
Technical Specifications
Recommended
Rated Stroke: 2 mm
Spring Force: 130 gf (5oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Spring-Loaded Pogo Pin SCPA031(21) for Chip Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA031(21) we will introduce is 0.31 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 Amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 0.7 mm. But it is better to be pressed at a distance of 0.45 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.45 mm, the loaded force is about 20 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: Beryllium Copper, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 2 amps
Contact Resistance: 100 milliohms max
Bandwidth: 7.4 GHz at -1dB
Inductive Reactance: 1MHZ at -0.05996 uH
Capacitive Reactance: 1MHZ at 0.425647 uF
Specifications:
Full Stroke: 0.7 mm
Rated Stroke: 0.45 mm
Spring Force: 20 6 gf at load 0.45 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Spring Pogo Pin Semiconductor Test Probe SCPC028 Applied to IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPC028 we will introduce is 0.28 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The top plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 amps. The typical maximal contact resistance is about 150 milliohms.
The plunger can be pressed at a distance of up to 1.05 mm. But it is better to be pressed at a distance of 0.7 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.7 mm, the loaded force is about 25 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze/Gold Clad Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 2 amps
Contact Resistance: 150 milliohms max
Bandwidth: 8.5 GHz at -1dB
Inductive Reactance: 1MHZ at -0.0788 uH
Capacitive Reactance: 1MHZ at 0.3165 uF
Specifications:
Full Stroke: 1.05 mm
Rated Stroke: 0.7 mm
Spring Force: 25�±7 gf at load 0.7 mm
Mechanical Life: about 100000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Spring Loaded Pogo Pin Test Probe BIP68 Series for Battery Contact
Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components.
Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders.
A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity.
The products in this page are classified into BIP68 series of battery contact probes. The outside diameter is usually 0.68 mm and there are some common tip styles, for example J.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 0.95 mm (37 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms (Maximum)
Full Stroke: 0.5 mm
Rated Stroke: 0.4 mm
Spring Force: 10 gf (0.35 oz)
Company information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Spring-Loaded Pogo Pin SCPA031(21) for Chip Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA031(21) we will introduce is 0.31 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 Amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 0.7 mm. But it is better to be pressed at a distance of 0.45 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.45 mm, the loaded force is about 20 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Ph, Au on Ni Plated
Bottom Plunger: BeCu, Au on Ni Plated
Top Plunger: BeCu, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 2 amps
Contact Resistance: 100 milliohms max
Bandwidth: 7.4 GHz at -1dB
Inductance: 1MHZ at -0.05996 uH
Captance: 1MHZ at 0.425647 uF
Specifications:
Full Stroke: 0.7 mm
Rated Stroke: 0.45 mm
Spring Force: 20�?�±6 gf at load 0.45 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Electronic Test Probe Double-sided Spring Pogo Pin SCPA057 for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
SCPA057 series is a medium-sized one in all semiconductor test probes. Both plungers are movable. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
Its parameters are as below.
Materials (plated)
Barrel: Ph, Au on Ni Plated
Bottom Plunger: BeCu, Au on Ni Plated
Top Plunger: BeCu, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 3 Amps
Contact Resistance: 100 milliohms, max
Bandwidth: 5 GHz at -1dB
Propagation Delay: 24 ps
Inductance: 1MHZ at -0.03664 uH
Captance: 1MHZ at -0.704638 uF
Specifications:
Full Stroke: 0.63 mm
Rated Stroke: 0.5 mm
Spring Force: 45 ±13 gf at load 0.5 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Double-Sided Spring Pogo Pin Test Probe SCPC031 Applied to Chip Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPC031 we will introduce is 0.31 mm in barrel diameter and 6.7 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The top plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 150 milliohms.
The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.65 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.65 mm, the loaded force is about 25 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 1.5 amps
Contact Resistance: 150 milliohms max
Bandwidth: 7.5 GHz at -1dB
Inductance: 1MHZ at -0.05856 uH
Captance: 1MHZ at 0.434274 uF
Specifications:
Full Stroke: 1 mm
Rated Stroke: 0.65 mm
Spring Force: 25�±5 gf at load 0.65 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Double-sided Spring Pogo Pin Test Probe SCPC058 for IC Test
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPC058 we will introduce is 0.58 mm in barrel diameter and 8.85 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from SUS304 plated with gold and nickel. This double-sided spring pogo pin could withstand the current up to 4 amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1.2 mm. But it is better to be pressed at a distance of 0.8 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.8 mm, the loaded force is about 35 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: Beryllium Copper, Au on Ni Plated
Spring: SUS304, Au on Ni Plated
Electronic Specification:
Current Rating: 4 amps
Contact Resistance: 100 milliohms max
Bandwidth: 9.3 GHz at -1dB
Inductance: 1MHZ at -0.02158 uH
Captance: 1MHZ at 1.4027 uF
Specifications:
Full Stroke: 1.2 mm
Rated Stroke: 0.8 mm
Spring Force: 35�±7 gf at load 0.8 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Spring-loaded Pogo Pin In-circuit Test Probe PICT102-BK(7.6) for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PICT102-BK(7.6) series here. Its barrel diameter is 1.02 mm and the total length is 33 mm.
The barrel of this pogo pin is made from phosphor bronze plated with gold and nickel. The plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This test probe could withstand the current up to 3 Amps. The typical maximal contact resistance is about 50 milliohms.
The plunger can be pressed at a distance of up to 6.8 mm. But it is better to be pressed at a distance of 4.3 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 4.3 mm, the loaded force is about 205 gf, which fluctuates to a tolerance.
For details, please check below parameters.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms
Full Stroke: 6.8 mm
Rated Stroke: 4.3 mm
Spring Force: 205 gf (7 oz) at load 4.3 mm
Materials
Contact Barrel: Phosphor Bronze, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Plunger: SK4, Au on Ni Plated
Company Information
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Double-sided Spring Pogo Pin Test Probe SCPA030 Series Applied to IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA030 we will introduce is 0.3 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from stainless steel plated with gold and nickel. This probe pin could withstand the current up to 1.5 Amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 2 mm. But it is better to be pressed at a distance of 0.85 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.85 mm, the loaded force is about 10 gf or 20 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: SK4, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SUS304, Au on Ni Plated
Electronic Specification:
Current Rating: 1.5 amps
Contact Resistance: 100 milliohms max
Bandwidth: 9.3 GHz at -1dB
Inductance: 1MHZ at -0.02829 uH
Captance: 1MHZ at -0.609436 uF
Specifications:
Full Stroke: 2 mm
Rated Stroke: 0.85 mm
Spring Force: 10�± 3 gf at load 0.85 mm, 20�± 6 gf at load 0.85 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Double-sided Spring Pogo Pin Test Probe SCPA021 Series for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA021 we will introduce is 0.21 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1 Amp. The typical maximal contact resistance is about 200 milliohms.
The plunger can be pressed at a distance of up to 1.1 mm. But it is better to be pressed at a distance of 0.65 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.65 mm, the loaded force is about 12 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Ph/ SP, Au on Ni Plated
Bottom Plunger: SK4, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SWP-A/B, Au on NI Plated
Electronic Specification:
Current Rating: 1 amp
Contact Resistance: 200 milliohms max
Bandwidth: 9.7 GHz at -1dB
Inductance: 1MHZ at -0.05647 uH
Captance: 1MHZ at 0.864722 uF
Specifications:
Full Stroke: 1.1 mm
Rated Stroke: 0.65 mm
Spring Force: 124 gf at load 0.65 mm
Mechanical Life: about 100000 cycles
semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Switching Probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc.
Their application field is mainly as below
Wire harness connector
PCB component detection
Door open-close switch
Fixture component detection
Automation process sensing
Position and retention force
Below switching probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm.
As usual, switching probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A.
The typical maximum contact resistance of this model SWP164 is 160 m.
The materials used for the construction of switching probes are different for each component:
The barrel is made of brass. Subsequently gold plated during the galvanic plating phase.
The spring is made of gold plated music wire.
The plunger is made of Beryllium Copper, then gold and nickel plated.
The insulating sleeve is made of POM
For details of SWP164 switching probe, please check below parameters.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 160 milliohms, maximum
Full Stroke: 5 mm
Rated Stroke: 3.3 mm
Spring Force: 130 gf (4.5 oz)
Normal Condition: Disconnecting between Plunge 1 and Plunger 2
Press down 1 mm: Continuity between Plunger 1 and Plunger 2
Materials
Contact Barrel: Brass, Au on Ni Plated
Spring: SWP, Au on Ni Plated
Plunger 1: Beryllium Copper, Au on Ni Plated
Plunger 2: Beryllium Copper, Au on Ni Plated
Insulating Sleeve: POM
Advantages of this switching probe
Reliable performance
Low cost of test
Best yield
Our company are also able to change the head shape, total length and diameter, etc., of our switching probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs.
Company Information
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
442 In Circuit Test Probe Spring Pogo Pin Pe100(115) Suppliers
Short on time? Let In Circuit Test Probe Spring Pogo Pin Pe100(115) sellers contact you.
