Please click here to check who's online and chat with them.

Find Verified Hydraulic Manifold Block Processing Suppliers, Manufacturers and Wholesalers

Jan-03-23
 
For the Hydraulic Manifold Block with porous system like cranial nerve, after made samples successfully,
They have a special hydraulic manifold block, which includes 13 groups of M32 threaded holes, and all of them are stepped holes. At the same time, there are cross holes, straight holes, and bypass holes. The hole size is required to be more than 8. Compared with the hydraulic manifold blocks with 10 groups of normal threaded straight holes, it is not only complex in structure, but also 20% higher in precision. Arno knew that it was difficult, so he arranged 3 hydraulic manifold block manufacturers for proofing, which lasted 60 days, but all of them failed to meet the standard. This is a test order of hydraulic manifold block from an old customer. Arno wants to struggle again. Due to time constraints, he does not dare to use a new hydraulic manifold block manufacturer. His old hydraulic manifold block supplier is also unreliable. This makes , who has eight years of procurement experience, a little overwhelmed.

I had a hunch that this hydraulic manifold block was not simple. Because the PO of hydraulic manifold blocks given to me by is a challenge every time. engineers pondered over the drawing of hydraulic manifold block sent by , and it is really difficult to process, with very high precision. There are not only many pore systems, but also many deep holes, more than 20 groups of 4 deep holes, with a length diameter ratio greater than 25. For M32 threaded holes of stepped holes, the coaxiality between holes is required to be 0.02mm, and the coaxiality between threads and holes is required to be 0.045mm. This complex pore system structure is like the distribution of the nervous system of the human brain. Doctors without more than 10 years of experience in brain surgery may not be confident to operate on the operating table.

technical team, after 3 days of internal research and discussion, the plan has been worked out, and our chief engineer will handle the knife, starting from the production drawing of the hydraulic manifold block. However, I replied to that was only 90% sure that the sample of this hydraulic manifold block was successful, and the cost was not low. Maybe hesitated and didn't give any reply for 3 days. On the fifth day, received the development fee paid by him.
GOLD Member
Apr-01-25
Supplier From Howrah, West Bangal, India
 
Hydraulic Pay Off Stand
GOLD Member
Aug-03-16
Supplier From Ajman, United Arab Emirates
GOLD Member
VERIFIED
Nov-01-07
Supplier From Gresik, East Java, Indonesia
GOLD Member
VERIFIED
Oct-18-16

Palmboom Margarine

$19.85
MOQ: Not Specified
 
Palmboom Margarine 500g

Product Origin : Indonesia

Key Specifications/Special Features : Food And Beverages, Margarine

Minimum Order : 1x20'F
456093 Hydraulic Manifold Block Processing Suppliers
Short on time? Let Hydraulic Manifold Block Processing sellers contact you.
Jun-07-22
Supplier From Ningbo, Zhejiang, China
 
Only AAK was able to produce the hydraulic manifold blocks, and its technology is not inferior to American and Japanese counterparts

Scott comes from an equipment company in the United States. In the second half of last year, they developed a hydraulic equipment to be introduced at the exhibition. The chief engineer of the company requires the purchasing department to get all hydraulic manifold blocks arrive at the factory within 3 months. There is a hydraulic manifold block. Due to the slow production, the production time of 45 days is not enough. Scott disassembled the hydraulic manifold blocks, purchased the hydraulic valve blocks from one factory and the hydraulic cartridge valves from another factory. All hydraulic manifold blocks and those parts produced separately arrived at the factory in the United States in 3 months. The technicians in the workshop installed them. After a few days of commissioning, they found that there were oil leakage on one hydraulic manifold block, that is the one disassembled and produced in two different factories. The chief engineer requires getting a new hydraulic manifold block within 1 month, otherwise it will be too late to catch the exhibition.

Scott contacted the original manufacturer. As a result, the two hydraulic valve manufacturers prevaricated each other. Their engineers also tested the hydraulic cartridge valves and hydraulic valve blocks separately, and there was no abnormality. Scott tried to contact new manufacturers of hydraulic manifold blocks, but they all said that they couldn't get samples ready within 30 days. Scott was worried.

Scott saw on AAK website that a hydraulic manifold block was very close to the size he wanted to purchase, so he sent an inquiry. After two rounds of communication, we learned about the problems he encountered in purchasing hydraulic manifold blocks. I told him that if the hydraulic cartridge valves and the hydraulic valve blocks were approved to be no problem, the workshop technician might break the seal ring or shift the seal ring during the installation of the hydraulic manifold blocks. This kind of hydraulic manifold blocks purchased from different manufacturers and then assembled is easy to have problem. A customer of AAK encountered similar problems before. After Scott asked their mechanic to replace the sealing ring, there was no abnormality in the test run, and they could catch up with the exhibition. Scott is glad that the problem of hydraulic manifold block has been solved, and said that for all hydraulic equipment orders after the exhibition, the hydraulic manifold blocks will be purchased from AAK, and also asked us to send hydraulic manifold blocks with similar dimensions to the United States to test stability and service life.
GOLD Member
VERIFIED
Aug-29-16
Supplier From Surabaya, Indonesia
GOLD Member
VERIFIED
Jun-28-21
 
We are supplier and exporter of Hydraulic Oil.

Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.

Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
GOLD Member
VERIFIED
Apr-23-10
Supplier From Buenos Aires, Argentina
Supplier Of Fresh Fruits   |   Soybean   |   Orange   |   Fresh Green Peas   |   Fruit Puree   |   Beans   |   Tea   |   Sunflower Seed   |   Amaranth Seeds   |   Fresh Squid   |   Chia Seeds   |   Quinoa Seeds   |   Flour   |   Fresh Lemon   |   Vegetable Seeds   |   Chickpeas   |   Wheat   |   Pear   |   Raisins   |   Peanuts   |   Apple   |   Coriander Seeds   |   Flax Seeds   |   Corn Flour   |   Seafood   |   Peas   |   Corn   |   Shrimps & Prawns   |   Sesame Seeds
GOLD Member
VERIFIED
Jan-17-23
 
The hydraulic enema/ sausage machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency
GOLD Member
Jul-11-20
 
- Product name: Tumi Ishi Wood Rock
- Color: Natural wood color
- Material: Pine Wood
- Shape and Size: Random
- Type: Other Educational Toys
- Usage: Relax and Educate
GOLD Member
VERIFIED
Mar-27-19
Supplier From Buenos Aires, Argentina
 
Quality: Sun dried, whole, ground (size 3-8mm), tbc (0.2-2mm)

Packing: PP Bags p/15kg

Season: June - September

Origin: Paraguay

Annual production volume: 100ton

Container capacity: 6-12ton
GOLD Member
Sep-24-13
Supplier From Tra Vinh, Viet Nam
GOLD Member
Apr-20-05
Supplier From Madurai, Tamil Nadu, India
GOLD Member
VERIFIED
Aug-08-08
Supplier From Shanghai, China, China
GOLD Member
Jul-12-20
 
REMELTED ZINC BLOCK
ZINC 99.92%, ALU 0.002% , PB 0.003%, CD 0.002%, FE 0.003%
GOLD Member
Feb-12-17

Frozen Lime (Lemon) Leaves

$4 - $5
MOQ: Not Specified
 
Origin: Vietnam
GOLD Member
Feb-12-17

Frozen Banana Leaves

$1 - $2
MOQ: Not Specified
 
Origin: Vietnam
GOLD Member
Feb-12-17

Frozen Jackfruit Meat

$4 - $5
MOQ: Not Specified
 
Origin: Vietnam
GOLD Member
VERIFIED
Apr-03-18
Supplier From Mumbai, Maharashtra, India
456093 Hydraulic Manifold Block Processing Suppliers
Short on time? Let Hydraulic Manifold Block Processing sellers contact you.
Explore Hydraulic Manifold Block Processing related import export discussions